Jump to content
SAU Community

The Goods On Oils


PHaT MR30

Recommended Posts

Everything he sells are Group IV, IV/V or V

I'm using Royal Purple 5w30, but will switch to Amsoil next. Apparently a slightly better oil (Group IV/V blend) but little price difference.

Castrol Edge would market their oil as synthetic, as would the Shell one (Helix?), Havoline something-a-rather, but they're all Group III.

So you've been chatting to Harold too? :3some:

I was previously using German Castrol 0w30 in an RB26, on a track day (only 4-5 hot laps at a time!) and a cold day, oil temperature just got to 90 degrees celsius at Sandown. EDIT: This is group IV or V, not to be confused with Australian Castrol (cannot confirm if its group III or IV or ...)

Royal Purple is apparently, a group IV / II blend or is it V + II (?) anyway bobistheoilguy (forums) have a big debate about if its good or not, Amsoil was not recommended as that great either, but often recommended over Mobil1 and Royal Purple.

However, the only thing those guys seem to consider "good" is Redline oil (good for track, pretty average for street apparently) and other very high end oils.

Personally I'm using Amsoil 10w40 next change because I want something with a higher viscosity due to possibly doing a spring/summer track day :thumbsup:

Link to comment
Share on other sites

It's seems there's lots of movement in regards to what oil is what group... Some of the Mobil 1's are apparently not Group IV or higher - Castrol EDGE is apparently Group IV but Edge Sport is Group III - and now there is talk that some of the very new Group III's are competition for the old Group IV's... damn confusing if you ask me.

bobistheoilguy members would be hard masters that's for sure. I'd love to run Redline all the time but it's really pushing in terms of $$ and considering you should change after every track day... it could get very pricey.

Waiting for my account to be verified at bitog so i can dig around :)

Link to comment
Share on other sites

hey i have an 81 mgc210 skyline with 168 000 km on the clock what oil would u reccomend for an engine of this age iv been told if i use too thin an oil it will leak out the seals i no its a simple question but id really like an answer im changing the oil and filter in a few days.

Link to comment
Share on other sites

hey i have an 81 mgc210 skyline with 168 000 km on the clock what oil would u reccomend for an engine of this age iv been told if i use too thin an oil it will leak out the seals i no its a simple question but id really like an answer im changing the oil and filter in a few days.

Maybe phone Penrite, they make a pretty good product thats not off the wall when it comes to $ and at least you'll have an idea what type- Dino, syn, semi, etc and viscosity you will need, even if you don't buy Penrite.

My guess in Penrite would be, mineral , HPR 10 or HPR 15 , or mineral 10x40 or 15x50 in any decent brand , in but I'm no expert.

Link to comment
Share on other sites

  • 3 weeks later...
I just found this

e-monitor

I will be giving this a go after my next oil change and post up some results.

I was running 300v but just can't justify it with the all the daily commuting I do. I have just changed to Nulon 10-40 Fast flowing stuff, will see how it goes in 5000km.

Snap.

After endless "best oil" searching and no discernable conclusion looking likely , ever, I went with a Valvolene 10-30 semi syn which behaved like flushing oil when hot according to my oil pressure gauge so I rissoled it after 20ks and having read every oil bottle label in Autobarn that seemed remotely relevant I to decided on the Nulon 10-40 fast flow fullsyn and so far it's looking good, nice hot /cold oil pressures and the engine sounds comfortable.

Not at all technical but seems as good a yard stick as many I've read.

:P

Edited by BASHO
Link to comment
Share on other sites

I just found this

e-monitor

I will be giving this a go after my next oil change and post up some results.

I was running 300v but just can't justify it with the all the daily commuting I do. I have just changed to Nulon 10-40 Fast flowing stuff, will see how it goes in 5000km.

Link to comment
Share on other sites

okay, long story short I won 3 5L bottles of mobil 1 0w40

question I have is would I be safe to put it in my car, which says to use 5w30 on the oil cap. I've just been using motul 300v 5w30 so far

my car has a VQ37HR motor essentially same as vq35hr and done about 20,000k's so far

Link to comment
Share on other sites

I normally use Redline in my car, but was impressed when i saw a demonstration with SCHAEFFER oil.

Not to mention its more expensive than Redline as well!

Can u oil gurus check this out?!? I dont know shit about oil when it comes to the details.

Thanks.

Link to comment
Share on other sites

I always ran Amsoil and Amsoil filters in the USA.

The oil doesn't break down like the other synthetics..

What is the interest in bringing in Amsoil products here in Sydney?

PM me if you would purchase it if it was available here in NSW!

Link to comment
Share on other sites

I always ran Amsoil and Amsoil filters in the USA.

The oil doesn't break down like the other synthetics..

What is the interest in bringing in Amsoil products here in Sydney?

performancelub.com sells that oil, take a look his shipping rates are pretty good...

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are fixes for this. In industry we use compressed air for everything. It is frequently wet, and many things cannot tolerate it. So there are various forms of driers available that you can install. The simplest option for something like this would be a dessicant drier. Much cheaper to replace some silica gel than actuator cylinders.
    • That's a solid update mate, well done at WA FOS. You may already know this, but the actuators on the paddle shift are a service item and are sadly not that reliable. As I understand it they collect water from the compressor (condensation) which then rusts the bores/pistons in the actuators. A mate of mine had no end of trouble with them in one if his circuit cars, apparently it's a 'known issue'. Buy a couple of spares at great expense to ensure you never have any problems with the ones you've got! Any clues about what the new WTAC rules might be? While faster cars are cool the Pro class arms race has got to the point where you wouldn't even bother entering without a $1m budget and even then I don't think you'd win.  
    • https://nissan.epc-data.com/skyline/er34/3945-rb25det/trans/317/31940N/ The pictures of the part you're talking about is clearly not just one solenoid. You can see another picture of it here: https://www.alltranz.com.au/shop/drivetrain/automatic-transmission/RE5R01A/product/9305/ The 4 speed automatic in the GTT is Nissan corporate stuff. You can search up similar jobs done on a Frontier or Pathfinder with a RE4R01B to get an idea for what the internals are going to look like and the procedure like this:   
    • Hi Chris,   long time since your post, just wondering if you have the Pinout for the v35 stereo plugs, I bought the roem nis2 harness but it doesn’t match the v35 connector. any help appreciated, I can work out the grn and power constant. But the rest might be hard. thanks Tyson
×
×
  • Create New...