Jump to content
SAU Community

Recommended Posts

U trolling? Or have you only read one or two pages?

To the dismay of the performance community sougi was canned. Birds was a seller and thus has a supply left (possibly, it all gone yet mate?).

Anyways, it was the best (top quality for bottom price), but sadly is gone. Strongly recommend the motul 8100 xcess (and the new 10w40 one), and royal purple.

Yes it's technically impossible to buy in shops unless the shop still has some in stock. GW stopped making it, so it may not be an oil you want to "switch to", but if you want to give it a shot, I can get you it for $65 a bottle. Only a few bottles left that I'm willing to sell off...the rest I'm stashing. Buy up on the M5000 though, it's just as good

and nearly half the price :)

Yep, a mix of grades 3 and 5, with a bunch of healthy detergents for the engine

so why are you guys talking it up so much when there are full synths readily available, like motul for under $80?

Edited by Munkyb0y

Pipster, how does Syn-X compare with M5000, S6000, Motul or the other oils you've used in the past?

Seems pretty good, not quite as good and it won't be in for as long (5000 km changes I think) but great for the price. I think I'm on about 3000 kms now and it's not as noisy as nulon was

so why are you guys talking it up so much when there are full synths readily available, like motul for under $80?

most the syns you can buy off the shelf are only group 3 or 4 at best, m5000 may be only semi-syn but the syn part is group 5 like the $120 motul stuff

so why are you guys talking it up so much when there are full synths readily available, like motul for under $80?

You can get motul 8100 xcess for $59 at some places which is a fully synthetic grade 4 oil, I've been telling people to use it for years but some how it got lost in this thread and everyone started group wanking over sougi and other oils which tbh I don't think are as good value.

Grade 3 fully synthetic oils are light years ahead of what was available when our engines were built and will provide ample protection even in a highly strung engine.

Seems pretty good, not quite as good and it won't be in for as long (5000 km changes I think) but great for the price. I think I'm on about 3000 kms now and it's not as noisy as nulon was

Just out of curiosity how are you judging it as 'not quite as good' eg what metrics are you using to compare them?

Edited by Rolls

You can get motul 8100 xcess for $59 at some places which is a fully synthetic grade 4 oil, I've been telling people to use it for years but some how it got lost in this thread and everyone started group wanking over sougi and other oils which tbh I don't think are as good value.

Been using Motul 8100 X-cess the 4 years I've owned my skyline - based on the information in this thread. I'll be moving to 8100 X-Max (10w40) on my next oil change though ..

I don't imagine it'll be much different though ..

You can get motul 8100 xcess for $59 at some places which is a fully synthetic grade 4 oil, I've been telling people to use it for years but some how it got lost in this thread and everyone started group wanking over sougi and other oils which tbh I don't think are as good value.

You don't think a grade 5 for $65 is good value?

Certainly isnt wanking material, although it could help with the chafing I suppose... :laugh:

When it was for sale you could get it cheaper than that too.

To munkeyb0y, m5000 is the semi, s6000 is the full. m5000 was round ~$30 for 5L, which would be more than fine for 3000km. What other oil would you put in an rb for that much? That's why it was/is good value. It apparently has very similar additives to what s6000 had, which was the the second most important point of using sougi, the first being grade V oil for half the price of 300v

ive been using motul 8100 xcess for years now. very pleased with it, so i havent bothered changing to another brand.

i think i'll be trying the 8100 10w40 next time.

i would have tried the s6000 had i been aware of it.

i dont feel right using a semi when there are full synthetics within a reasonable price range.

You don't think a grade 5 for $65 is good value?

Certainly isnt wanking material, although it could help with the chafing I suppose... :laugh:

Which oil?

According to BITOG Motul 8100 X-cess 5w40 is a IV/III blend, and the price reflects that.

http://www.bobistheoilguy.com/forums/ubbthreads.php?ubb=showflat&Number=85798

The Motul 300V is mostly group V and the price reflects it :(

anyone tried motul xcess 10-40

Lol read up man, it was 'the' oil to use until sougi came along, I would say it is now one of the best value ones, it is even in the opening post of this thread!

Which oil?

According to BITOG Motul 8100 X-cess 5w40 is a IV/III blend, and the price reflects that.

http://www.bobistheo...at&Number=85798

The Motul 300V is mostly group V and the price reflects it :(

the 5w40 is a blend, the 10w40 is a pure group IV oil.

edit: it doesnt look like they make the 10w40 group iv anymore, dang.

Edited by Rolls

supercheap is selling the syn-x 3000 for $26.48 as of tmrw (easter catalog)

cheap if you want to try it, i'm using the same system to judge goodness that told me that nulon was bad - my ears and the feel of the car

You can get motul 8100 xcess for $59 at some places which is a fully synthetic grade 4 oil, I've been telling people to use it for years but some how it got lost in this thread and everyone started group wanking over sougi and other oils which tbh I don't think are as good value.

Grade 3 fully synthetic oils are light years ahead of what was available when our engines were built and will provide ample protection even in a highly strung engine.

lol yes they group wanked over Sougi, but before that no one in this thread left the house for fear of missing a bat session with Motul oils.

ive been using motul 8100 xcess for years now. very pleased with it, so i havent bothered changing to another brand.

i think i'll be trying the 8100 10w40 next time.

i would have tried the s6000 had i been aware of it.

i dont feel right using a semi when there are full synthetics within a reasonable price range.

Bit of a mental barrier, but a good semi will perform just as well as a full. The main difference between synthetic and semi is the service interval length, so as long as you're on top of that you have nothing to worry about.

supercheap is selling the syn-x 3000 for $26.48 as of tmrw (easter catalog)

cheap if you want to try it, i'm using the same system to judge goodness that told me that nulon was bad - my ears and the feel of the car

UOA lynchmob are winding their nooses...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Middle seat good for a slab of beer or Esky for a road trip. 2x kids, means 1x free seat lol.
    • So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
×
×
  • Create New...