Jump to content
SAU Community

Recommended Posts

Once my engine Is running at normal operating temperature, the 40 grade feels great...I wouldn't want to or need to go any thicker unless I was tracking the car. Engine temps are very consistent even after a thrashing. Again, it won't kill your engine to run a 10w60, but the 40 does feel smoother IMO.

Yes I would recommend Syn X 6000 for an RB26. I have been using this oil in my RB25 the last 5000-6000km and it's been good. Much the same feeling as Sougi 6000 had. About due for an OCD change, though there would be plenty of mileage left in it if someone wanted to stretch for the 10,000km.

Had some experience with Royal Purple API 10w40 oil, ran it for 11000km in my rb26 on a single shiite fram filter (noob mistake) and the oil was still light to mid brown, admittedly the motor was fresh but the oil was still relatively clean and the pressure was still 3.2 bar at warm idle, 4 bar cold. No oil analysis just my personal observation for what its worth. Currently running RP HPS 10w40 with a K&N gold HP2008 oil filter, car seems very happy.

I'm using Gulf Western Syn-X 6000 in my NM35 Stagea; I reckon is very similar to the Sougi S6000 that I was using previously.

$150 for a 20lt drum; what more can you ask for? Basically getting the 4th change for nothing.

before my local Autobarn stopped selling it, 8100 was around $80 / 5l.

I did a LOT of reading on oil before I did my first oil change in my new car - the Royal Purple seems to be good due to high levels of ZDDP in the HPS at least, however their marketing claims have been called out as BS numerous times on the BITOG forums. Also hard to find and pricey unless buying from a workshop.

before my local Autobarn stopped selling it, 8100 was around $80 / 5l.

I did a LOT of reading on oil before I did my first oil change in my new car - the Royal Purple seems to be good due to high levels of ZDDP in the HPS at least, however their marketing claims have been called out as BS numerous times on the BITOG forums. Also hard to find and pricey unless buying from a workshop.

Spotted RP on the shelves at Supercheap the other day

Must be everywhere now because this was in Launceston lol

Remember at the end of the day it is just oil, at $80 a change you could afford to replace your stock r32 motor every 37500kms instead.

Gotta weight up how much it is actually worth spending on oil.

before I did my first oil change in my new car

;)

Where the hell do you guys get the Syn-X 6000 from? Supershit/Autoshit/Repco doesn't stock it...

Prob a GW distributor?

http://www.gulfwestern.com.au/GW_nearest_stockist.html

not 100% accurate as i can get it in Tas but they don't list the people i use (Independent oils in Ulverstone)

Where the hell do you guys get the Syn-X 6000 from? Supershit/Autoshit/Repco doesn't stock it...

I live not too far from GW head office in the 'Riff.

You pay for it, & they make you go and get it of the racking in their warehouse...

Worth it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
×
×
  • Create New...