Jump to content
SAU Community

The Goods On Oils


PHaT MR30

Recommended Posts

^The purple doesn't last long. Turns brown as it oxidizes :P

Have used Nulon 10w-40, Motul 8100 X-Max 10w-40, Royal Purple Synerlec SL, API and HPS 10w-40 and now Penrite Racing 10w-40.

All these oils we used for 2 or more oil changes cos I want to see if there were any benefits.

No discernible performance difference. Engine ran the same.

The only thing I noticed was that the Nulon at 5000km became a lot thicker whereas the other oils stay nice and fluid at cold temperatures.

The old adage "you do get what you pay for" doesn't always apply to all things especially engine oil but in this instance, it was enough for me to move away from the product.

Link to comment
Share on other sites

Look to be honest Royal Purple is the best oil I have ever used so far, it craps over Motul IMO, engine ran so much smoother, quieter.

Only reason why I am changing is due to the price, it was ok before the price hike at $90 a bottle, then it went up to $110 and now almost $130 and for something that you're just gonna dump every 5000kms average 6 months its a waste.

Link to comment
Share on other sites

Look to be honest Royal Purple is the best oil I have ever used so far, it craps over Motul IMO, engine ran so much smoother, quieter.

Only reason why I am changing is due to the price, it was ok before the price hike at $90 a bottle, then it went up to $110 and now almost $130 and for something that you're just gonna dump every 5000kms average 6 months its a waste.

Couldn't agree more, royal purple has been my choice of oil for over 4yrs, but I would like to give hpr15 a shot
Link to comment
Share on other sites

Okay, oil done... My oil pressure is now lower than normal??

It used to sit just under 4 in stock 32 gtst gauge..

Now sits under 2...

And both drop when car gets warmer obviously..

Edited by ZRBE
Link to comment
Share on other sites

Okay, oil done... My oil pressure is now lower than normal?? It used to sit just under 4 in stock 32 gtst gauge.. Now sits under 2... And both drop when car gets warmer obviously..

Probably the oil pressure switch thing. My car does the same sometimes.

  • Like 1
Link to comment
Share on other sites

Confused if I should go with Penrite Racing 10 10-40w or Penrite Racing 15 15-50w, Car has 81000kms on the clock with just the first stage mods, intake, front mount, exhaust, 12psi, power fc 211rwkw, thanks.

Depends on what you do with it, if you daily drive it 10-40 will be great, if you flog it for hours or track it go the 15-50, in this 40c weather the 50 would be better even for daily driving but it doesn't last more than a month or so so 40 I would still put in.

Edited by Rolls
Link to comment
Share on other sites

Okay, oil done... My oil pressure is now lower than normal?? It used to sit just under 4 in stock 32 gtst gauge.. Now sits under 2... And both drop when car gets warmer obviously..

i had this issue when i trialled mobil1 few years back, engine was bit noiser on startup as well iirc, switched back to royal purple 10w-40 and all was good again, dont recall which weight mobil1 i tested though

Link to comment
Share on other sites

I use 5-40 on the track, and flog it. Never even thought about putting some 60 weight shit in.

That's the beauty of a functional oil cooler....

Temps never above 105 degrees.

Link to comment
Share on other sites

Okay, oil done... My oil pressure is now lower than normal?? It used to sit just under 4 in stock 32 gtst gauge.. Now sits under 2... And both drop when car gets warmer obviously..

In the manual it says to check oil pressure by removing the sender unit and to connect an after-market pressure gauge, and test on a warm engine...

RB20DET

@ 600 rpm pressure should be 1 kg/cm2

@2000 rpm pressure should be 3 kg/cm2

@6000 rpm pressure should be 4 kg/cm2

and the do say these are approximate readings.

Link to comment
Share on other sites

In the manual it says to check oil pressure by removing the sender unit and to connect an after-market pressure gauge, and test on a warm engine...

RB20DET

@ 600 rpm pressure should be 1 kg/cm2

@2000 rpm pressure should be 3 kg/cm2

@6000 rpm pressure should be 4 kg/cm2

and the do say these are approximate readings.

Uhhh, okay.

Well I don't know where the sensor unit is..

And I have a Defi oil pressure gauge, not installed though..

My oil pressure doesn't change at all with RPM?

Only drops once and that's when the car is warmed up..

Link to comment
Share on other sites

Quick question.

Got a mate (R33 GTS-t) who needs an oil change, he has a spare bottle of 0w40 in the garage.

is this going to cause any damage if he puts it in knowing it's getting up around 38 degrees in Canberra?

Nope it's fine. Only issue I can see is that there might be light oil burning when cold, if the motor is worn.

Link to comment
Share on other sites

Well if you want peace of mind then you might just have to book it into a service centre to have it checked properly.

Yeah, looks like I might have to.. Bleh

I hate paying labour costs :(

Plus find all other things wrong with it lol..

Link to comment
Share on other sites

hey guys just wondering what oil weight you would recommend for a fully built rb25 its oil change time and i was gonna go with redline 15-40w i have been using castrol edge titanium 10w60 but someone suggested this isnt a good weight for goldcoast during summer? i know this has probably been covered in the previous 152 pages but i dont have time to trawl and ive done a few searches but not really answered my question. so i thought i would get some opinions

anyways cheers for any replies

Edit: i should add it is daily driven (not very far a lazy 10 min drive) and if it were ever to go to a trackday i would change to something recommended for the track.

Edited by Nii San
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Suspension bush. Got urethane bushes in the upper arms?
    • thanks for heads up on actuators - will sort something as back up or solution as yes dont need that have enough trouble but no doubt some addition of something to spares boxes is required yes have a clue about WTAC but nothing has been officially put out yet so will wait to see exact details Pro class is, has been and will become a draw card for lap records and one off builds for show and thats about it I think - be interesting to see how open they make it Pro am is the old Pro in reality Open class will be split into 2 with slicks and 050's with no doubt slight variances in allowable drivers and changes in aero Clubsprint + apparently a true street class   They have to and are refreshing it all and bringing things up to current standards and need to 100% adhere to rules because whether people like it or not / or say it or not - for alot of competitors it is sheep stations and has been for a while when Im getting told I was illegal because i cut my rear bumper too high and yet others where in the grey areas of legality with everything from engines, suspension, ride heights and more serious influences it actually got quite out of control and heated this year so as much as I may be impacted by some of the changes and prob spit the dummy when I have to spend money changing things I think its a good thing for all
    • I can’t tell if it’s suspension related or maybe wheel bearing or motor mount.  IMG_6209.MOV
    • Start with a multimeter, and see if you're getting power at the TPS. There should be a manual for your car somewhere on these forums and it'll have the info for what closed TPS signal voltage is, and how it should sweep to full throttle. Same as for other sensors / valves.   Have you checked things like your base timing etc? See if anything looks amiss there too?
    • here are 2x options to consider: https://www.selby.com.au/price-promise/tonewinner-sw-d6000-subwoofer.html https://www.apollohifi.com.au/svs-pb-3000-ported-subwoofer-black-ash-pre-order.html I'm waiting for a good BF/CM sale and will pull the trigger on a new sub, I do like the SVS PB-3000 (13") but you could nearly buy 2x Tonewinner D6000s (15")
×
×
  • Create New...