Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

For a street engine, anything over 40w is probably just accelerating wear and tear, the thin oil will flow faster and absorb/transfer heat better leading to less wear and quicker up to temperature... :camping:

5-60 is thick when its cold, compare it to a 5-30, the whole number thing is confusing maybe it should of been rated like 30-5 and 60-5??

Even with the best oil though, you probably get oil being washed off the bore under rich running conditions, so I use Lucas UCL which hopefully sprays lube on the cylinder ( top fuel dragsters use it) and I started adding

Zddp additive just to relieve my OCD thinking... but now i'll have to think of a 4th thing just to make it even cause 3 is bothering me now hahaha :glare:

Edited by AngryRB

Good thing about penrite is that it has always been high in zinc.

Cold viscosity is an issue with thicker oils but really the choice should be based on the level of protection at maximum stress, ie very high temps and high rpm . Speaking of additives, have seen slick50 used in the past and been impressed with the oil analysis that came back, given a lot of these were on chevys, but still a notable difference was seen in the wear particles.

Edited by XGTRX

The numbers on the pack don't mean much.You need to search for the actual viscosity at 40 and 100 degrees and go from there. Its got a name that I've forgotten.

Some would say they are the single most important thing to consider when selecting oil. They specify the range of viscosity, eg a -30 can be 9.3-12.5 and a -40 can be 12.5-16.3 at 100 degC.

I usually look to see what cars it is recommended for, Mobil says for GTR and is used as factory fill in many cars, part of me doubts whether penrite being Australian would have as much R & D as oils made in say Germany and Japan

kind of like comparing an aussie product like a Falcon or a beer with other products from Germany or Japan,

Edited by AngryRB

I usually look to see what cars it is recommended for, Mobil says for GTR and is used as factory fill in many cars, part of me doubts whether penrite being Australian would have as much R & D as oils made in say Germany and Japan

kind of like comparing an aussie product like a Falcon or a beer with other products from Germany or Japan,

Mean while, my GT-R always had Penrite oils in it. My R32 got Mobil 1 5W-50, swapped to Penrite and the engine sounded smoother :P.

BTW my car overheated twice (no oil cooler) at a track day, 10W-40 (Penrite Racing 10) did well then (still dropped ~5L out at next oil change, I put 5L in).

You'll be getting very similar protection regardless of brand (if they're proper synthetic).

SAE Viscosity 25W60

Kinematics Viscosity

Visc @ 40oC 270

Visc @ 100oC 23.5

TBN 9.31

Pour Point oC - 27

Flash Point COC oC 210

Does this seem like a good oil

Too thick for an RB with standard bearing tolerances. You'll just be pushing a lot of oil through the filter bypass and relief valves.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...