Jump to content
SAU Community

The Goods On Oils


PHaT MR30

Recommended Posts

Generally, unless you're radically changing oil viscosity or the old oil is very old/dirty, you're usually fine to just get the oil up to temp, drop it (don't burn yourself) and throw a new filter on with some fresh oil of your choosing.

Link to comment
Share on other sites

Generally, unless you're radically changing oil viscosity or the old oil is very old/dirty, you're usually fine to just get the oil up to temp, drop it (don't burn yourself) and throw a new filter on with some fresh oil of your choosing.

Thanks for that, thinking of going penrite HPR 5w-40 full synth. Or the everyday+ 5w-40 semi-synth. Edited by Zrobe
Link to comment
Share on other sites

500ml auto trans fluid in the oil. Idle for 15 minutes. Dump oil and filter.

there's your flush.

So.. Just any auto transmission fluid? Edited by Zrobe
Link to comment
Share on other sites

So.. Just any auto transmission fluid?

well new auto trans fluid but yes.. any brand. I just bought a 1L bottle of castrol auto trans fluid and it gives me 2 flushes.

I do it every 3rd oil change.

Link to comment
Share on other sites

So.. Just any auto transmission fluid?

well new auto trans fluid but yes.. any brand. I just bought a 1L bottle of castrol auto trans fluid and it gives me 2 flushes.

I do it every 3rd oil change.

Link to comment
Share on other sites

Could all be placebo but...

Going from Motul 8100 xcess 5w/40 to Gulf Western Synx 5w/40.

The motor feels a little more..."lethargic" during initial start, like it won't rev up as freely/easily/quickly.

Could just be the weather....

Link to comment
Share on other sites

You could be onto something mate, I wouldn't put gulf western in my lawnmower

Ooh... Very scientific.

I run GW in all 3 cars. Haven't had an issue. Synx6000 is not a bottom of the range product.

Link to comment
Share on other sites

I checked out the spec sheets of both Motul 8100 xcess and Gulf Westerns Synx6000, both were very similar on paper. even the Penrite HPR 5 is similar....

Could be just the cold weather...or there is something different between them that isn't counted on paper.

Link to comment
Share on other sites

  • 4 weeks later...

Could all be placebo but...

Going from Motul 8100 xcess 5w/40 to Gulf Western Synx 5w/40.

The motor feels a little more..."lethargic" during initial start, like it won't rev up as freely/easily/quickly.

Could just be the weather....

hmmm.

missus mazda 3.

was using penrite everyday syn 5w40.

engine has approx 130k.

went to motul 8100xcess.

feels alot quicker and more responsive.

might be the oil.

Link to comment
Share on other sites

I use the cheap $22 GW Synx-3000 semi-syn oil in my car & doesn't notice anything compared to what ever stuff was put in there by the work shop before.

I changed it every 5k km or 6 month & the car (used) to be a daily driver (no tracks) so I don't see the point of spending >$40 for oil.

Link to comment
Share on other sites

I use the cheap $22 GW Synx-3000 semi-syn oil in my car & doesn't notice anything compared to what ever stuff was put in there by the work shop before.

I changed it every 5k km or 6 month & the car (used) to be a daily driver (no tracks) so I don't see the point of spending >$40 for oil.

I've come to the same conclusion too, when you work out what you save over a 100k km on the $70 oil it adds up to nearly the cost of a low K wrecker motor.

Link to comment
Share on other sites

  • 2 weeks later...

Have read the last few pages of the thread but to be honest it's a bit all over the place. Just wanting to know what brand/weight of oil to use in my car.

RB25DET Neo with 130xxx k's on it. Will be my daily but I will hopefully be doing a few track days and 6-7 drift days per year and I will be driving it fairly hard. Where I currently am the temperature he's down to about 0 overnight and about 20 during the day.

Not really sure what brands are good and what weights for climate/engine age so any info would be handy, thanks!

Link to comment
Share on other sites

What brands would you suggest? Or doesn't really matter as long as its fully synthetic?

This engine won't have been started in about a year either, am I best off buying some helper stuff to put in at first start up then changing the oil once I know it's running fine?

Link to comment
Share on other sites

Been digging through this thread quite extensively but still having trouble making up my mind, hence my current post.

Just wanted some opinions on what oil i should be using for my next service. This will actually be my first service since owning the car so i don't wanna skip out on anything. I'm willing to spend big $$$ to make sure my pride and joy is running at its best. Through my reading, i've come across some good rep for SYN-X 3000, Mobil 1, Motul and Royal Purple.

CAR DETAILS

'98 Skyline R34 25GT (Coupe)

Automatic

Approx. 93,000km

Never tracked

It's been recommended to me, based on the number of kms the car has done, that i should be going for something along the lines of... Fully synthetic 10W-40.

Any info would be appreciated,

Cheers

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...