Gauge Install

[NoFX_Hardcore]

Hey guys,

Got an oil pressure and oil temp gauge to install in my 32 gtr and I was wondering what fitting I need to fit both of them? The sensors have 1/8" thread

Also, where abouts is the standard sensor? Is it easier to install there or use the oil filters location as suggested in the instructions?

Any help greatly appreciated.

Cheers,

Chris.

[RustyR32Gtst]

Your best bet is to get a sandwichplate with two inputs for your gauges.

[260tech]

Hey guys,

Got an oil pressure and oil temp gauge to install in my 32 gtr and I was wondering what fitting I need to fit both of them? The sensors have 1/8" thread

Also, where abouts is the standard sensor? Is it easier to install there or use the oil filters location as suggested in the instructions?

Any help greatly appreciated.

Cheers,

Chris.

As below (mean above sorry), sandwich plate plus pics of fittings on rear of guages, depending on manufacturer thread could be bsp/npt? Jap sandwich plate will be npt or close. Hosedoctor/Pirtek/Enzed/any brake fitting shop should be able to help.

Cheers GW

Edited June 20, 2008 by 260tech

[NoFX_Hardcore]

Thanks heaps guys.

[NoFX_Hardcore]

Got the fitting thanks guys, Just want to clear it up and make sure that I'm looking at the right thing but:

the stock oil pressure sensor... is it right next to the oil filter toward the rear of the car?? I've decided to use the stock oil pressure sensor spot and I've bought a t-piece to run them off.

Cheers.