Jump to content
SAU Community

Recommended Posts

Hey all.

I've got this strange problem with an R32 RB20. It has just an fmic, full exhaust, boost controller, etc. Still running the stock turbo.

Since it was bought, it's always had problems with missfiring under boost at higher rpm. We would change the plugs (Replace with BKR6Es gapped to 0.8mm) and it would drive well for around 1000-2000km, but then start missfiring again! Pull the plugs out, and they look fine, but put some new ones in and it drives well for another 1000-2000km?

I thought I'd try the BKR7Es on this car, as I use them in pretty much every other RB/SR with no issues whatsoever and something strange happened. The car wouldn't rev over 4000rpm. It was as if it was hitting a rev limiter? A really horrible missfire which would actually cause the revs to stop rising. We took the BKR7Es and gapped them all the way down to 0.6mm even and didn't help one bit! Tried taping up his coilpacks with electrical tape, and no help whatsoever.

After that we put another set of BKR6Es in and the car drove fine? But yet again, when 1500km ticked over, the missfiring came back.

Anyone have any ideas? :blush:

Thanks

Peter

Edited by Equinox

I'm having similar problems with my RB26DETT running a power FC with MAP sensor.

I might look into the ignitor pack also.

Mine only misfires when I hold the throttle steady above 4000rpm.

Very strange indeed.

I'll let you know if I find out what my problem is.

Rgds,

Grippy

Taping your coils isnt really a good fix for some coils anyway I had the same problem with mine so I tryed taping up the coils but didnt seem to work.

I gapped the plugs to .8 still missed in the end I just got some splitfires after that didnt even miss a beat also u dont have to change the gap to .8 i changed them back to 1.1 because my tunner said I wouldn't need them coz u would be creating enough spark with the splitfires.

How much Boost are you running?

have you thought of the fact that you are using BK plugs instead of BCP plugs. BK plugs are 2.5mm short than BCP plugs and might not be making a good connection up in the coilpack. the BCP plugs are the right size for a good contact on RB20 coilpacks

have you thought of the fact that you are using BK plugs instead of BCP plugs. BK plugs are 2.5mm short than BCP plugs and might not be making a good connection up in the coilpack. the BCP plugs are the right size for a good contact on RB20 coilpacks

Exactly what i was going to say QWK32, get some BCPR6ES and try, a crook ignitor "shouldn't" really come and go, usually they work or they dont lol.

Change the plugs, clean the afm, clean the coils, check your earth to the coils and good luck finding the miss as there is nothing more annoying than an miss :)

Could also be the coil loom/plugs on the loom, my plugs were falling apart causing a really horrible intermitent misfire (started only when hot then got gradually worse to where it was there all the time).

Thanks for all the help guys!

QWK32 I never thought of that. I'll give the other plugs a go. And I'll try to source another ignitor pack to swap it with to give it a try.

However, I think you're on the money bubba. I pulled off one of the plugs and had a look inside and the little piece of plastic which holds the pins against the sockets on the plug was broken! I wired the wires straight onto the coil pack for now until I can find a replacement plug. Put some new plugs in and it's working fine, for now. :(

Again, thanks for all the advice. I'll see how it goes!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...