R33 Gts-t Wheel And Tyre Sizes

[joeyjoejoejuniorshabadoo]

define "jdm" look.

i was running -6 rear and -4 front 17x9 with 215 tires for awhile. got sick of pizza cutter tires, now im +10 17x9 with a 255 tire, all 4 fenders rolled.

youre not going to get the "jdm" look without rolling your fenders. people here do it for 40 bucks a fender with the rolling tool and a heat gun

+1

[MaxGTST]

Perfect look in my opinion

18x9.5 +15 all around ! Rear are rolled/flared, front are rolled only

That's not my car, but on mine I'll probably go with work XD9 in 17x9.5 +17

[3wilson3]

Perfect look in my opinion

18x9.5 +15 all around ! Rear are rolled/flared, front are rolled only

That's not my car, but on mine I'll probably go with work XD9 in 17x9.5 +17

hey just a quick question,

im looking at 18 x 9.5 CR kais for my 33, in the pic are they 18 x 9.5 with +15 offset? CR kais come with a +12 offset so that means theyll stick out n extra 3mm is that right?

i dont wanna fork out thousands of $$$ and get it wrong lol

hope you can help, thanks heaps

[joeyjoejoejuniorshabadoo]

you'll need to flare your guards...

this will possibly (read probably) result in paint cracking

[SLY-25T]

Sparco NS2's

18x9 front

18x10 rear

dunno my offset

[drpheel]

hey just a quick question,

im looking at 18 x 9.5 CR kais for my 33, in the pic are they 18 x 9.5 with +15 offset? CR kais come with a +12 offset so that means theyll stick out n extra 3mm is that right?

i dont wanna fork out thousands of $$$ and get it wrong lol

hope you can help, thanks heaps

Check this out : http://www.1010tires.com/WheelOffsetCalculator.asp

[joeyjoejoejuniorshabadoo]

Sparco NS2's

18x9 front

18x10 rear

dunno my offset

its XXL

[SLY-25T]

lol thanx hamish.

is there any marking on the rim to tell me the offset?

[dezz]

Sparco NS2's

18x9 front

18x10 rear

dunno my offset

If you haven't had your guards rolled, the offset on those rims must be very high...like +40 or higher at a guess...

my 9.5" +22's stuck out heaps on the rear

[SLY-25T]

hey michael. nah havent had guards rolled yet. it isnt lowered but wen i do end up dropping it, they may need to be rolled. unsure.

[MIVEC]

I'm running 18x9's with 265s on my R33 and have not had my guards rolled. I don't get any scraping either.

However my car isn't as low as a lot of 33's here seem to be but I'm not stock either.

Offset is key.

[~R33AzzA~]

I'm running 18 9.5 +20 all round and have had the guards rolled, but it looks JDM.

Old pic, different front bar now.

[gotRICE?]

Im running Enkei RP-02 17x8 with 235's and 17x9 with 255's, chucking a quick tape measure over them im pretty sure its up 30 front and 38 down the back.

[joeyjoejoejuniorshabadoo]

I'm running 18 9.5 +20 all round and have had the guards rolled, but it looks JDM.

Old pic, different front bar now.

lookin tuff!

bit lower perhaps?

auss13 - the offset is written on the inside of the rims

[HEKT1K]

I'm running 18 9.5 +20 all round and have had the guards rolled, but it looks JDM.

Old pic, different front bar now.

what rims are they?

[HEKT1K]

I'm running 18 9.5 +20 all round and have had the guards rolled, but it looks JDM.

Old pic, different front bar now.

what rims are they?

[R33 WASP]

TYRE SIZES TO KEEP THE SAME ROLLING CIRCUMFERANCE AS THE 16" FACTORY TYRE'S ARE FRONT 225/45/17 AND THE REARS 255/40/17 17 X 8 + 25 front and 17 x 9 +35 rear. THAT WAY YOUR SPEEDO SHOWS THE CORRECT SPEED ALS OJUST ASK YOUR LOCAL TYRE SHOP TO MATCH THE 16" ROLLING CIRFUMFERANCE TO YOUR NEW TYRES THEN U WILL BE OK

[alr33x]

dude its a 2 year old thread.

[joeyjoejoejuniorshabadoo]

lolwutkkbyebye