Jump to content
SAU Community

Recommended Posts

Pretty Much have to go custom mate

So cut and shut the stock one or get a complete custom one made up

There is another member bubba who is using an RB26 Plenum welded to the stock runners not sure where he is at with it might be something to look into...

For the money you pay for the good plenums I would probably seriously consider adapting the RB26 ITB setup to the RB20 head

Some nice custom plenums found here: http://www.ripsltd.com/products.html & http://customplenums.com/

Which ever way you go be aware it is going to cost a lot of money.

And if you search FIP:

http://www.skylinesaustralia.com/forums/Fr...tml&hl=rips

http://www.skylinesaustralia.com/forums/Mo...tml&hl=rips

http://www.skylinesaustralia.com/forums/In...tml&hl=rips

I have access to a tig welder but unfortunately don't have the know-how to weld cast alloy so will be taking it to a shop to do. Waiting to get my Q45 t/b and still sussing out what I need to graft onto the GTR plenum (AAC valve, vaccum points etc), then I'll be taking it to a local engineering shop to cut'n'shut for me. No idea on price but I imagine about half the cost of one of those dodgy ebay jobs.

ebay usa (i think) have jun style for rb20, mate just got one with tb for <$900 delivered

but dont be a tool, get an 80mm TB

http://www.skylinesaustralia.com/forums/Fr...00-t223568.html

(its the r32 rb25de head, i.e. same as rb20det)

ebay usa (i think) have jun style for rb20, mate just got one with tb for <$900 delivered

but dont be a tool, get an 80mm TB

http://www.skylinesaustralia.com/forums/Fr...00-t223568.html

(its the r32 rb25de head, i.e. same as rb20det)

rb25de and rb20 intakes are different, rb25de has larger ID runners and different gasket etc..

rb25de and rb20 intakes are different, rb25de has larger ID runners and different gasket etc..

for the R32... (non vvt) ? because the guy in the link just ordered one for an rb20det and it bolted straight upto his r32 rb25de head, same size gasket and ports

thanks 4 all the help. was wondering if i have to relocate my battrey to do this mod?

dose anyone have a pic of one they have fitted cheers

On the R33 the throttlebody exits pretty muh straight to the side of the radiator/headlight you need a pretty tight bend, i cant remember what the 32 battery area looks like but if you were to use a stock tb and 2.5" piping i cant see why you couldnt squeese past with some clever piping (through headlight), otherwise you can get a smaller batters, run it sideways or re-locate.

Edited by SKiT_R31

20det and 25de (r32) will bolt up but the ports are definately slightly larger.

I went from a 20det to a 30det using a 32 25de head and it was something we noted :banana:

When shopping for plenums you are pretty much shopping for a 20det setup :P

If you use a GReddy plenum you will need to relocate the battery (as we recently found out when dropping a 25det/30 with a greddy plenum into my mates gts4).

I am hoping that with the gtr plenum (the angle of the entrance is less than that of the greddy type) and q45 throttle body it will still come out close to where the standard GTR piping comes so hopefully I can get away with using mostly standard gtr cooler and piping.

my first gtst had a cut and shut manifold, it was rb20de runners with the flanges cut off the 26 manifold and welded, the throttle body was then welded to the front, it is a tight fit but can be done, just have a bit of a nasty bend just before entering the throttle body, we cured this by sqaushing the pipe into an oval and then run it under the head light and down the front to the intercooler.

the 25's and 20 greddy do fit each other, the 25 det manifolds were changed so the water coolant exited via the front where the temp sensors are, where as on the earlier rb manifolds it had three seperate pipes that ran under the manifold the joined at the front before entering the radiator. the flanges that bolt to the head are cose enough to not be of significant concern but can be matched if you can be bothered.

mate i got mine off ebay cost me $700 or $800 cant quite remember and this guy is in adelaide and was a good thing he will either weld on the tb flange for the stock item or bigger depending on wat you want and just need a longer throttle cable i went with a 300zx one from a jap wrecker then just have to modify the coolant hoses and i went with a gtr top hose since it was the right thing to clear the fan and afew other moave to move ds along the way and i didnt have to the battery although is very close though and make a new ic pipe as well

this is the guy i got it off late last year had a quick look not sure if hes still selling them or not

http://myworld.ebay.com.au/adtms2007

post-20540-1214714143_thumb.jpg

thanks wortho for putting them up, the design has slightly changed since those pics (only the angled base plate of the plenum is different)

yes you do have to move the battery, but considering how easy it is to do, i wouldn't consider it a major setback.

Edited by ISL33P
  • 3 months later...

Finally got my plenum done, already knew it wouldn't line up but if that guy can make 370rwkw on an RB20 with the same setup, mine should chirp 2nd :( The runners aren't as bad on the inside as they look on the outside, the stock runners were pretty thick and a fair bit larger than the 26 runners so we were able to find a happy medium between them all.. it was a bit of a bastard though as the last two come out of the head on completely different angles. Had to heat up and bend in the first and last runner slightly towards the centre.

Needs a cleanup and a paintjob but need to get it in the car first and sus out where to run the water hoses along with where to put the posts for holding the throttle cable. Will also probably remove all of the redundant posts on the top.

plenum-001.jpg

plenum-002.jpg

plenum-003.jpg

plenum-004.jpg

Edited by bubba

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • He obviously had his reason for flipping you off. I wonder what it was...
    • Thats why I stay far, far away from Eastwood. only go there if I wanna eat Korean food 
    • I have to agree like, yesterday, I was driving down the warringah freeway towards the bridge when this jackass driving a beaten up Honda civic cut me off so suddenly it made me almost yank the wheel to avoid him hitting my car. Honestly and he had the NERVE to flip me off (or some other gesture Idk). Im a calm guy, but really some people just dont deserve to have a license, let alone be allowed to drive on densely populated roads/highways. If youre gonna cut through lanes at least use the damn turn signal
    • HPA do an interesting video on tuning, and Adrian shows on the dyno, moving from 10:1 to 12:1 (And I think even 13:1) and the power moves SFA. However, a couple of degrees of timing has a HUGE impact. Exhaust side of things will more be the length of the exhaust and how many bends and turns you have. The straighter you can keep it, the better. By a lot. Oh, and getting the diameter right. Bigger isn't always better. Going to big can actually lose you power.
    • I have to say, most people I see on the road fit the bill of atrocious drivers. Whether they be cowboys in their dual cabs, bogans in the Commodores, or the soccer mums. Pretty much most people on the road put zero freaking thought into driving. Barely look further up the road then the end of their bonnet, and have never even thought about how catastrophically wrong shit can go, by doing what they all deem as normal driving. Especially their late braking, racing to stopped lights, and sitting half a foot off the bumper of the car in front at 110km/h. Wanna know what's even better? By the time their kids get to be old enough to learn to drive, they've already got in the back of their brain what is normal driving, how annoyed you're allowed to get at people etc, and then their parents who actually have zero freaking skill at driving (Even though they constantly say "I've been driving for 20 years and never had an accident!") teach the little twerps how to drive, or should I say, how to make a car move. Literally watched a parent teach their L Plater, on a 4 lane freeway, that you just slam the brakes on, and push your way over, even with a B Double bearing down on you, and that's how you should drive, rather then, just keep going to the next exit. Same shit happens all the time for side streets etc, watching numpties pull dumb shit turns pushing across 3 lanes of traffic, rather than just go up the road another 30 seconds, and take the next turn that'll get you to the same location... Oh, and the damn right lane bandits. Or the retards driving along with their headphones in, and can't hear the ambulance or fire truck right up their ass about to run them over...   Pretty much, people drive on the road, like ego centric f**ks, and don't actually think how dumb shit their driving is, how it could easily kill them or someone else in a split second, or at the very least, how they're driving is contributing to all the shit they're bitching about on the road, like shitty congestion!
×
×
  • Create New...