Jump to content
SAU Community

Recommended Posts

Yeh, once those bolts are off, hit it with your palm a bit to get it moving slightly, then push a small screwdriver in and lever it out. Thats what we did with hoony's car. Also, we got some fishing line and used that to cut the glue. Just be careful, because the spoiler came flying off and left a HUGE scratch on the boot lid... Oops!

Link to comment
https://www.sau.com.au/forums/topic/225472-spoiler-removal/#findComment-3971421
Share on other sites

i had a go at removing my r33 s2 spoiler, well suffice to say it was a sh!te attempt, couldn't find any bolts or anything? all i could see under the bootlid was the struts holding it up :D

you get to the 4 bolts from underneath the bootlid - you will need to peel back the carpet lining to get to them from memory.

Link to comment
https://www.sau.com.au/forums/topic/225472-spoiler-removal/#findComment-3977066
Share on other sites

Hi, SAU.

Trying to remove my old spoiler so I can replace it with a S2 one.

I currently have the S1 Oval like one and can't seem to remove it.

I have removed the 4 bolts (which I can see) and it doesn't want to budge.

Am I doing something wrong? Am I missing a few bolts?

Any help would be great.

Cheers.

hey i pulled mine off yesterday. there's two square plastic clips on either side, you have to get between the wing and boot pry it up i used a paint scraper and a flat head scewdriver. hope it helps.
Link to comment
https://www.sau.com.au/forums/topic/225472-spoiler-removal/#findComment-3978520
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
×
×
  • Create New...