Jump to content
SAU Community

Recommended Posts

Hi guys. Just bought an R33 gts-t and looking for some help and advice on reconnecting the original boost solenoid, as when I picked the car up it had a bunch of hose ends filled with screws.

I've searched about and haven't found any pictures which make it totally clear what goes where. Here is what I have:

Solenoid.jpg

The hose marked 2 is joined here behind the I/C pipework (is this standard?):

connection.jpg

Am I right in thinking that hose 1 (from the I/C pipe work) needs to have a restrictor in it and is tee'd with the hose marked 2 and connected to B on the boost solenoid, leaving hose 3 to be connected to A.

Any help would be appreciated.

Cheers,

Dave

Link to comment
https://www.sau.com.au/forums/topic/225663-original-boost-solenoid-question/
Share on other sites

Ey dave... the original boost solenoid is being bypassed completely..

(on the boost solenoid)

A goes to the wastegate actuator

B goes to intercooler piping

What other mods came with the car? And why u wanna run the original boost solenoid anyway? I cant work out what why yours is set up that way dont have enough knowledge lol maybe others can shed light here...

what boost is your car running?

have a look at this thread for pics

http://www.skylinesaustralia.com/forums/In...hl=manual+boost

Thanks for the advice. The car is running the low 0.5 bar boost all the time so getting the standard solenoid plumbed back in would be an improvement! As to other mods its been lowered, and had a cat back exhaust replacement. Engine is standard (other than the bypassed solenoid!).

Having done a bit more poking about looking to connect to the waste gate actuator I've run into a couple of problems. Firstly the connection is on the bottom and not on the top of the actuator like the other pictures/diagrams:

DSC00044a.jpg

And secondly it is connected to something further back towards the turbo:

DSC00045a.jpg

The photo is a bit rubbish but essentially the hose from the actuator (back shown on the left) is connected to the bottom of that nut in the centre of the picture.

Is the actuator standard, and is it connected correctly? Do I need to tee into this to connect it to the solenoid? Or have I got it all wrong?

Any help is much appreciated.

Cheers,

Dave

i should add where A goes to the intercooler piping: the intercooler hose connects to the other hose grouped with the one comming from the actuator with a T-peice and its this that connects to the boost solenoid.

Your actuator looks ok????? i cant tell, Is there a hose comming out the top? It looks like the grouped hoses have been moved and pulled up onto the intake manifold??? I cant tell lol

take a couple photos from a little further back (engine bay) so we can see the whole picture (both sides of the intercooler piping)

Once again many thanks.

Here are some wider angle shots to show the carnage surrounding the boost solenoid and the extra tee behind the I/C pipe (the blocked off hose from the T in the last picture can be seen just below the I/C pipe):

DSC00051a.jpg

DSC00052a.jpg

DSC00053a.jpg

There is no hose coming from the top of the actuator, just one from the bottom, which is connected towards the turbo (not sure what its connected to see the second photo in my second post just behind the actuator rod)with a loop of hose. This looks original but I'm assuming it can't be because its supposed to be tee'd in with the line from the I/C pipework before being connected to the solenoid is it not?

Cheers,

Dave

stock should look like think (i think)

Your actuator doesn't look stock cause of where the hose is connected. Should be up like the one in my picture, not down. Maybe a series1, i don't know

1 goes to a T joint then splits out to your turbo actuator. The other hose from T goes to A.

B goes to 3.

2 is not standard. I don't know why it is connected this way.

post-48477-1214615786_thumb.jpg

post-48477-1214615799_thumb.jpg

post-48477-1214615815_thumb.jpg

Edited by teng

Awesome! :D

Just what I needed, I will be re-plumbing accordingly!

It is definitely a series 2 engine (1996 car, and no spark amplifier on the back of the engine block). Any ideas as to the connection back to the turbo? Even though this is not the stock actuator, will there be any problems plumbing it in as stock and blocking off the connection to the turbo?

Cheers,

Dave

Just try connecting it to stock first. You may need a longer hose as the actuator hole is at the bottom.

Two more attachments just for info.

Was there any problems with the car when you drove it. Any difference in power when all the hoses are connected like on your 1st and 2nd image? I don't know why the solenoid was by-passed, could it be defective hence the previous owner did it this way.

post-48477-1214692084_thumb.jpg

post-48477-1214692118_thumb.jpg

Edited by teng

What does the actuator of an r32 look like? One way to increase the boost in the r33 is to install the actuator from an r32 as the spring is preset to 10psi... i dunno if this has anything to do with the way yours has been moded or not as i haven't looked at an r32 engine...

you said your running the low 0.5 bar boost ?

but stock skylines run 7psi (0.5 bar) from like 5000rpm as high and 5psi as low

so if you connect the stock boost solenoid back it will run the the above mention set up and the car will feel slower?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • FWIW, as well as a basic immobiliser/remote unlock (all basic units give you those 2 things), I would also install a 4g tracker in any car I cared about. Just hide it anywhere that won't be found in a rushed look and preferably get something with a built in battery backup so it stays online for a while when the battery is removed or flat While its not a car, when our car trailer was stolen in that den of crime Sydney about a decade ago, the cops were watching from the bloke's neighbour's lawn within about 2 hours until he started swapping the plates and putting up the gumtree ad.   Obviously it is still not undefeatable (eg parking it up for a few days somewhere without sky sight) but it greatly improves your chances of getting it back quickly and with less damage
    • Instead of magic keyphrases I wonder if something can be done with auto complete. Similar to how user names are handled already. When you type '@' and follow with letters, it'll search across all usernames. It might work to have the same for forum topics. Some key to trigger it and then text search across all thread names and it'll insert the name and URL when pressing enter.
    • Hmmm.... It's actually a bit weird. Here's the key bit of the diagram. I've circled what I'm pretty sure is the high beam indicator on the cluster. It appears to be just in parallel with one of the high beam lamp globes. Meaning, that however the high beams get lit, the indicator should also be lit. So there shouldn't be any difference between being on normal headlight main beam, or just flashing. I've followed the physical diagram (which is not so easily summarised in a single snip, so I didn't put it up here) and it agrees with what you can see here. If you struggle to follow this crap....let me explain some of it. I always struggle when I first look at this - even though I have looked specifically at this more than once in the past. We'll start with the flash. The flash is triggered by pulling the dip switch back, right? That is indicated on the diagram by the P position on the switch block labelled "Light SW", on the RHS of the snip. The bottom-right most terminal is connected to ground. That's that wire line going down to the bottom. The next terminal up is connected to the bottom terminal when the switch is pulled back. That provides ground to wire LA33, which is connected to the coil of the relay in the middle of the snip, "Headlamp relay (2M)". That relay always has power on the other side of the coil, from fuse #19 above it. When that relay is triggered, the two main headlamp fuses #32 & #33 above feed through the relay down onto wires LA31 and LA32, which are connected into the wires that go to the main beams, LA04 and LA06. The cluster indicator is connected to LA32 also. When the main beams are on normally, the light switch ("Light SW" again) is in the M position. Power comes in for the left and right sides on LA34 and LA36, via the other light switch (the one on the binnacle, called "Light SW (Instrument)" on the diagram). Obviously that switch needs to be in the 2nd position, because that's headlights. 1st position is parkers. The same main headlamp fuses #32 & #33 feed through that switch, out via LA34&36 to the stalk switch, and of out of the stalk switch via LA04 and LA06 to the headlamps. From there, it is no different to the flasher version. I really don't know why they bothered with the flash relay. They probably didn't want to add another contact in the stalk switch - but I'm damn sure that's what I would have done. Just reverse the order of power feed, so that it goes from the fuses to the stalk switch first, and add another contact for flashing. Everything would have worked just the same, but less complicated. /bitchrant
    • I think the solution Pac posted in the other thread is the way to go with the top screen; I have an ADM Q50 and I only use it for 2 things: 1. Reverse or front camera as triggered automatically by Reverse selection or the front sonars, and you can also call up the front left (or front) camera when parking by hitting the camera button on the centre console if necessary 2. Navigation. I can assure you that getting hold of a 10 year old nav system is utterly useless. The ADM system still has Inifiniti dealers marked (always give me a good laugh), is missing all new freeways, uses fixed speed by road type to determine arrival time, no traffic/re-routing, no speed cameras, no user reported cameras etc etc you get the idea So, Pac posted in the other thread about a box that plugs into the USB C and gives you full Android OS to run whatever modern/connected nav you want on the top screen, and it still automatically switches back to function 1 above when required because it runs within the head unit. The other modern alternative is the latest version of the Tesla screen like this:  https://www.aliexpress.com/item/1005007511322502.html?spm=a2g0o.productlist.main.25.33cefEZifEZibq&algo_pvid=cdae429c-aa8d-437f-a436-c727fee85461&algo_exp_id=cdae429c-aa8d-437f-a436-c727fee85461-12&pdp_npi=4%40dis!AUD!2181.36!1265.19!!!9834.81!5704.20!%402101c71a17362022663526105e36d7!12000041077843545!sea!AU!163137612!X&curPageLogUid=F9811g8oqx5H&utparam-url=scene%3Asearch|query_from%3A But I haven't looked into whether it is compatible with Australian 4G bands yet so it may require a separate 4g dongle to provide data
    • In the 32 race car, I basically run what Gary told me and it is lovely across a range of conditions which is what I needed. I've got revalved bilsteins, adjustable solid sway bars, adjustable bushes all round. Just looking at Neil's R33 GTST and it has pretty much the same on board, Gary Bilsteins, Selby/whiteline sway bars.  Gary knows suspension generally and these cars specifically very well across street, street/track and track only use and gives a very well balanced set up. Just be aware his preference is for light springs and heavy sway bars, there is another school of though (eg MCA) that prefer lighter swaybars and heavier springs/shocks. The evo I raced had that setup and it was also very nice so there are multiple ways to skin cats.
×
×
  • Create New...