Jump to content
SAU Community

Recommended Posts

yeah the cops just pic a car they wont and see if they can find anything wrong with it. i no when i had my GSR lancer with evo3 kit on it i used to get pulled over all the time cause it stood out and in my skyline i havent been pulled over yet and i drive that alot harder. I reckon its cause it looks stock no bodykit only mags.

hmmm. i got pulled over at a "defect" set up on clarence street i think it was in belerieve.

ive got a r31 rb30e+t, the car was wearing bald front tires at the time (got three punctures in my good ones so chucked some spares on :laugh:) car has a woodstock "catch" can.

they pulled me over, checked my back tires, didnt check under the hood (i had a dash mounted boost gauge so i thought they might have put the puzzle together) and then gave me a defect notice for having a headlight out, just the headlight not the parker, didnt check my front tires or anything else at all.

replaced the headlight, wiring was screwed so i twisted the parker wire together to the headlight wire and bing! no more defect... altough im sure its now heaops dodgier than having 3 lights at the front of your car insted of 4... they only gave me 72 hours to fix my headlight wiring :D

i have noticed quite often lately ive been pulled over alot, i dont mind tho, id like to think that if my car was stolen a cop would pull the crim over thinking it was me (hoon) and licence+bretho check so i could use that licence number they got to find who pinched ma car!!

as for your run in with the bov atmo being illegal, should have asked what legislation that reffers to and also what the lmax legal DB reading is and how they were measuring it, sure they would have done you over but its not liek they could have gotten you for hooning if your parked?? lol

is a trucks atmo bov illegal?? what about there hydro brakes when they pull up at the lights?? its basically the same sound

Edited by Cheddle

oh. cool :laugh: there ya go air brakes... once had one of my mums friends ask when i took her for a spin in the gts-4 "wha?? does this think have those hydralic brakes them trucks have??" so thats as far as my education on brakes on trucks goes :D

is a trucks atmo bov illegal?? what about there hydro brakes when they pull up at the lights?? its basically the same sound

Trucks dont run blow off valves, they dont have throttle plates or even vacuum for that matter. Engine speed all controlled by fuel delivery...

Trucks dont run blow off valves, they dont have throttle plates or even vacuum for that matter. Engine speed all controlled by fuel delivery...

so how does the air get into the cylinders in N/A trucks? vacuum generated by the pistons moving of course

the truck i drive is a v8 turbo diesel and that has got a wastegate on it and thats fairly loud. get pulled over all the time from transport in it. they pull all company trucks now trying to find anything wrong with them, even when they are brand new idiots.

the truck i drive is a v8 turbo diesel and that has got a wastegate on it

Of course its got a wastegate, its not going to just freeboost is it.

I'm glad they pull trucks all the time. They're pretty f**king dangerous things to drivers and other motorists when not in tip top mechanical nick.

so how does the air get into the cylinders in N/A trucks? vacuum generated by the pistons moving of course

Yes there is vacuum generated on the intake stroke only, but there is no manifold vacuum since there is no throttle. Hence the reason for the use of vaccum pumps on smaller diesels with vacuum assisted brakes.

Yes there is vacuum generated on the intake stroke only, but there is no manifold vacuum since there is no throttle. Hence the reason for the use of vaccum pumps on smaller diesels with vacuum assisted brakes.

and how often does the intake stroke occur?

and the only reason for the vacuum pumps is becuase the vacuum that is generated by the engine isn't enough to run brakes powerful enough to stop the truck/

Most trucks use air operated brakes, climb back in your hole wombat.

I was making a point that trucks dont use blow off valves because they dont have a throttle plate, what happens when you open the throttle completely on an aspirated engine?? Manifold vacuum disappears.

Thanks for the education though, ill keep it all in mind. As Wogboy said, once you create a restriction the vacuum is huge.

Getting back on topic now....

Yeah good idea, I'm not sure about anyone else up here in Northwest tas but I haven't any trouble with cops pulling me up for my car and my gtr runs sequential bovs and they ain't exactlly queit but then neither is my car. Which wogboy can confirm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...