Jump to content
SAU Community

Recommended Posts

Very well.

It needs at least 375-400hp

350 is not enough. its soooo heavy, even with 225/40 on a 9.5j with 50PSI i couldnt keep em spinning with TONS of clutch kicking to help unless i was at the top of hte rev range the whole time (like above 5k entering the initiation)

gtr brake upgrade is plenty to not have any brake fade for at least 15 minutes (sessions are 15 minutes each)

i stopped breaking axles, so thats good

anyways, its much more predictable than say a 180 or s13 or so. i really like it

videos will be up along with pictures, i think someone get some snaps of me

Link to comment
https://www.sau.com.au/forums/topic/225687-so-how-does-a-stagea-drift/
Share on other sites

Very well.

It needs at least 375-400hp

350 is not enough. its soooo heavy, even with 225/40 on a 9.5j with 50PSI i couldnt keep em spinning with TONS of clutch kicking to help unless i was at the top of hte rev range the whole time (like above 5k entering the initiation)

gtr brake upgrade is plenty to not have any brake fade for at least 15 minutes (sessions are 15 minutes each)

i stopped breaking axles, so thats good

anyways, its much more predictable than say a 180 or s13 or so. i really like it

videos will be up along with pictures, i think someone get some snaps of me

in for vids mate, sounds great, so are u still running the gtr 5 speed and 4wd front diff in place as per rs four specs yes? just with a removed front shaft to stop the 4wd workin? i would love to give mine a proper go but was worried the front end is too heavy and will tend to understeer alot. I have the power but its not a very smooth transition when sliding ive found, i think im going to change coilovers soon these ones are doing my head in to be honest.

abit offtopic i know but do u know which companies make coilovers for the 260rs models still?

now get those pics and vids up, i think your stagea is one of the hottest ive seen with such a subtle and a not over the top bodykit like some kits around

have u thought about throwing on a rb25 rwd sump and a gtst 5 speed box instead? i noticed when checking specs of the stagea models and the rs four is 1620kg and the rsx with the rwd rb20e only says it weighs 1430kg, thats a huge weight saving, though im unsure how true this weight is

Edited by unique1

love to see the vids as well!

Would like to do a similar look with the ride height and wheels to my stagea, but not sure how well that would go down...

Ive taken mine for a lil bit of a slide and i agree with the predictability - its easy to anticipate what the car is going to do. I like it. Slides well til the atessa torques up the front and pulls you straight. The 4wd stageas have hicas, too...? Are you running a hicas lock or anything?

in for vids mate, sounds great, so are u still running the gtr 5 speed and 4wd front diff in place as per rs four specs yes? just with a removed front shaft to stop the 4wd workin? i would love to give mine a proper go but was worried the front end is too heavy and will tend to understeer alot. I have the power but its not a very smooth transition when sliding ive found, i think im going to change coilovers soon these ones are doing my head in to be honest.

abit offtopic i know but do u know which companies make coilovers for the 260rs models still?

now get those pics and vids up, i think your stagea is one of the hottest ive seen with such a subtle and a not over the top bodykit like some kits around

have u thought about throwing on a rb25 rwd sump and a gtst 5 speed box instead? i noticed when checking specs of the stagea models and the rs four is 1620kg and the rsx with the rwd rb20e only says it weighs 1430kg, thats a huge weight saving, though im unsure how true this weight is

yep just have a front driveshaft removed, thats it.

everything else is stock. im about to eliminate the attessa shit in the back but just gotta find time.

I was having a problem with understeering, but i just went to lower front and higher rear tire pressure and lowered hte damper setting on the front a few clicks and it pretty much stopped it.

not doing that much work with changing engines and shit. too much work with not enough effort

the car is 3700lbs...100 lbs isnt going ot make a shit bit of difference in drifting.

up next?

2617370105_f43551c441.jpg

watch out pedestrians

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Strange your posting about this being an issue. Move the harness or change your wheels or run more camber etc. Have the thing not touch the thing so it doesn't destroy the thing.  Short answer, no. Slightly longer answer, the factory fuel gauge is measuring resistance. You need to wire in the FPG fuel level sender into the original factory fuel level sender wiring.  I drew you a picture to explain this one The factory strainer is quite long, reaching down into the bottom of the tank. Safe bet your aftermarket fuel pump has a little baby sized strainer that probably doesn't even point down towards the bottom of the thank.  Solution, move the pump lower down in the tank, or fit a longer strainer, or do both. I did both, I've run my tank down to 5L remaining and the car still drove fine.   
    • S2/3 GT-R is the same as S2 GTS-t The SRS airbags module in under the centre console. The S1/S1.5 GTS-t and S1 GT-R had the module built into the steering wheel. FWIW, I have a S3 GT-R wheel in my S2 GTS-t shit box. Same airbag plug, airbag light goes on then off, meaning all systems are go. S3 GT-R has red stitching, that's about it.
    • Dumb question, but why would it matter if the wheel came off a car with hicas or not?
    • Hey to anyone that reads this, long time lurker first time posting, sorry if it’s been answered before but I’ve been looking for nearly a year now for answers. ive got a 25det neo in an r32 that works awesome when it works (made 500whp on 21psi) but works 45% of the time, 1st issue there’s a harness that runs under the passengers side front fender that my tire keeps rubbing through and one wire seems to power the fuel pump even though I’ve done the relay “mod” some people like to call it, and when it does rub through it kills the car, yes next time I’m with the car I want to take the fender off and try tuck the harness well out of the way but I’d also like to try and by pass this mysterious wire as well lol, also wouldn’t mind getting power from the alternator as I’ve read it supplies the pump with 13v ? But no idea where to run the power wire too. 2nd issue, when replacing my fuel pump and fuel hanger I managed to break the factory fuel level sender leaving me with no fuel gauge, I’d like to buy the fpg fuel level sender for r32/s13 but the plug it comes with confuses me, I’ve got a detschwerks x1 fuel hanger which has light + pump - level + pump + and a ground, I’m no auto sparky but I’m wondering if I can cut the plug off the fuel level sender and wire the negative to the pump negative and wire the positive to the level positive to get a fuel gauge back ?🥴 3rd and final issue, the reason I want a fuel gauge is because whenever it’s below half a tank, it fuel starves like crazy and runs like a bag of shit even without doing a pull or sloshing the fuel round in the tank, I’d also like to fix this but have no idea what’s causing it, I’ve got a dw420 and a dead head fuel setup meaning the fuel is regulated before it gets to the engine, my only theory is that the return line is to close to the pickup on the pump and when it’s at half a tank the return line is causing the pump to cavitate enough to cause fuel pressure issues, that or the pump isn’t low enough in the tank which I would find strange considering I can’t find a single thing online about it, also if ya wondering how I figured out it happens at half a tank without a fuel gauge, I waited until it started happening and went and filled up and the car took exactly 30 litres every time I tested it, if ya managed to read through this mess I appreciate that and any recommendations , cheers
    • ChatGPT is trash and lies about things I would not expect it to lie about considering many things it's wrong about are very easily verified with google. The S3 R33 GTR shares its steering wheel with R33 GTSTs of the same production year. Part number is 48430-26U17. I'm guessing you have to get it from a car that came with HICAS though, the ER33 is 48430-26U18, but the HR33 diagrams note that part number is still leather vs 48430-26U13 which is not leather-wrapped. They all use the same airbags, so if you need another one you can get it off basically any same year R33 or Stagea.
×
×
  • Create New...