Rb Clutch Tool

[Travis Trayhern]

Hi has anyone got a rb clutch tool or knows where to get one?

[blind_elk]

For doing what to the clutch?

[Travis Trayhern]

lining the thing up with the flywheel, looked at the clutches ya buy from the states and they come with the tool to do it just wondering if anyone has got one or knows where to get one i hate using the stupid uni tool i got from repco

[blind_elk]

If you are in Melbourne, you can borrow mine (which came with the new clutch).

[Travis Trayhern]

If you are in Melbourne, you can borrow mine (which came with the new clutch).

thanks for the offer mate i live 400km away, what cluch did you buy that come wif

[r33_racer]

just buy one from your local clutch place. plastic aligning tool....cost ya about $20. Just count how many spline your input shaft is and get that one from the shop!

[Jmaac]

saw one of an rb30 auto box - dime a dozen

[nizmonut]

or you could just use a half inch socket set extention.

[R33_ACT]

just get a piece of 16 mm dowling rod measure from the end of your shaft to the splines start and use anything to build it up to the clutch size in my case i used some rubber hose and tape