Jump to content
SAU Community

Installing Tein Super Streets Question?

turbs33
 Share

Recommended Posts

turbs33 Community Regular

turbs33

Posted
  • Author
Posted

just been out for my first drive on them and they are great, more comfortable then stock 15 y/o suspension and holds nice and flat round corners!!)

what dampening settings are u useing for street. mine are currently set on 4 all round. I think i am going to put this up to 8

turbs33 Community Regular

turbs33

Posted
  • Author
Posted

gtstcoupe, another question for you or anyone else that has superstreets...

With the dampening adjustment, if u get lost as to what setting ur at, how the hell do u know how to get it back to say setting 1(soft) or 16 (Hard)... the dial just likes to keep on clicking.. :laugh:

GtstCoupe Proficient

GtstCoupe

Posted
Posted

Ahh you will find that 16 stage is not 16 clicks there is about 20 clicks of travel in it and it just stops when you get to the end of it.

If lose count, just go bak to softest untillit stops and then count back or vise versa.

Ohh i use 3 clicks btw

Cheers :laugh:

turbs33 Community Regular

turbs33

Posted
  • Author
Posted

mine are aus spec.. currently set at 10 clicks back from hrdest setting and still a softer , more confrotable ride then stock, with next to no body roll and not bump or harsh at all....

10 / 10 here for teins..

Based on street use though, not sure how they would be on the track under more extreme conditions!.....

Craved Grand Master

Craved

Posted
Posted

ok while your talking about it

which way is which - is it like the old HA's where full clockwise is stiff and anti clockwise soft?

just picked up a car with the aus specs and need to loosen the rear

moobaque Rising Star

moobaque

Posted
Posted
ok while your talking about it

which way is which - is it like the old HA's where full clockwise is stiff and anti clockwise soft?

just picked up a car with the aus specs and need to loosen the rear

Well i got monoflex but yes its anti clockwise to soften and clockwise to harden. i can't see why they would swap one model around :)

Cheers

Camden

BHDave Grand Master

BHDave

Posted
Posted

They don't just keep clicking guys. turn them anti clockwise until they stop. you are at zero. Count up from there.

The manual on the aus model super streets does state that it's 16 clicks, to go any further is doing potential damage (or words to that effect).

moobaque Rising Star

moobaque

Posted
Posted
They don't just keep clicking guys. turn them anti clockwise until they stop. you are at zero. Count up from there.

The manual on the aus model super streets does state that it's 16 clicks, to go any further is doing potential damage (or words to that effect).

Id say they would be referring to people "forcing" them to click any further. But there are more clicks than 16. As i think has already been stated its around 20.

GtstCoupe Proficient

GtstCoupe

Posted
Posted (edited)

No wasnt say i dont belive you, but , if it wasnt ment to go only so far you would think it would just stop, but what your saying does make sense.

I tested out the click wheel on one shock before i put them in the car and thats when i discovered it went more than 16 clicks, and i have them at 3 clicks from softest in the car. :D,BHdave,i will definatly keep that in mind. :sick: ,Be interesting tho to seeif jap spec are differnt to aus, as i know aus has different valveing?

Teins FTW :D

Thanks Mate

Edited by gtstcoupe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Cold Start Rattling Sound

      By silviaz · Posted

      So my rb is finally having more problems. 2 issues here but I'm here to just to mainly discuss the rattle noise. The other day when I turned on the car and when I take off or go in reverse, there is a temporary rattle noise but when I cruise, boost, idle it's completely fine no rattle whatsoever. I've also done all the servicing, all the health checks you can think of and it all passes with flying colours.  Also the rattle doesn't increase with rpm, it's only at a very certain rpm (slightly above 1,100rpm). My other car also has the same issue every once in a while. Changed the oil recently, no difference. Even took my oil to a lab and everything was quite good surprisingly. Timing belt changed a while ago to. Had the car on the hoist and can't see anything obvious. Tightened a couple of nuts on the exhaust manifold a couple of months ago. 2 different clips uploaded. One of them was supposed to another issue but I'll save that for another time. Thought I'd see if anyone had this same noise before, it's a bit hard to diagnose while it's intermittent. If I'm not mistaken, I think I had this a while back but can't remember exactly. I was thinking if it's doable I'll get someone to hold the throttle cable at 1,100rpm and hopefully it replicates the sound. rb25det rattle only.mp4 rb25det slow start + rattle.mp4
    • yummy_o
      New R32 owner soon

      By yummy_o · Posted

    • PranK
      SAU History 101

      By PranK · Posted

      Haha wow, yes they do! Will sort tomorrow.
    • yummy_o
      New R32 owner soon

      By yummy_o · Posted

      Yeah I’ll know when I take it for a test drive and I’ll double check the turbos as well when I have a look at it again.  Just thought maybe they might have done something in the head cause it looks like they’ve taken off the rocker covers 🤔 Thanks for your info! 
    • Rezz
      New R32 owner soon

      By Rezz · Posted

      As Duncan mentioned it's likely a remapped ECU, like the the one listed in the link I post earlier:  https://minkara.carview.co.jp/userid/444260/car/444612/2099320/parts.aspx He quoted 444PS with an unopened engine and twin GT2510s @ 1.1bar boost... sounds about right?
×
×
  • Create New...