Jump to content
SAU Community

Wiring Up Reverse Lights In 4 Door 32

Lock_to_lock
 Share

Recommended Posts

Lock_to_lock Community Regular

Lock_to_lock

Posted
Posted

Hey guys

hoping i can get some help. I have done a search but havnt found anything.

I have recently done a manual conversion on my 4 door 32, but now i want to wire up the reverse lights. I know that i have to conncet the 2 wires off the box to a plug somwhere in the engine bay.

im hoping to do this tomorrow on my day off.

Any help is MUCH appreciated!

Cheers Josh

nizmonut Community Regular

nizmonut

Posted
Posted

heya josh, do a search on google for a pdf file for the R32 technicians service manual as it has all the wiring diagrams on it.

how ever the plugs for all the gearbox loom blugs in by the fuse box, theres a reddy brown coloured plug that was used for the auto box, it should be there.

GTS4WD Grand Master

GTS4WD

Posted
Posted
how ever the plugs for all the gearbox loom blugs in by the fuse box, theres a reddy brown coloured plug that was used for the auto box, it should be there.

Yip

theres 3 sets of connectors right next to the fuse box. They are attached to the strut tower.. Its the bottom one.. it has a total of 8 wires - 2 by 4

GTS4WD Grand Master

GTS4WD

Posted
Posted

You may also need part of a manual harness to mate up to the auto part of the wireing. I may be wrong.

Have alook to see if they do mate up and use the .PDF file to cheak to see if the wire positioning match. You can also pull the lugs that are attatched to the wire to change the order that the wires sit in the connector.

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Nismo coppermix twinplate clutch

      By joshuaho96 · Posted

      From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • hfygrte52
      R33 GTR tail light

      By hfygrte52 · Posted

      i need a complete tail light for my R33 GTR if you have please let me know.
    • hfygrte52
      Needs

      By hfygrte52 · Posted

      I need a great maintenance workshop around Idaho, if you know one please let me know..
    • hfygrte52
      Need 1993 GTR

      By hfygrte52 · Posted

      Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...