Jump to content
SAU Community

32 Gtr Using Shell V-power Fuel..

Tamrb26

By Tamrb26,
in General Automotive Discussion

 Share

Recommended Posts

Tamrb26 Enthusiast

Tamrb26

Posted
Posted

hi peeps, i just recently using V power and i experience it doesnt drink as much fuel. i normaly use BP ultimate but it drink hell alot more then v power.

Iv i heard BP ultimate is better for your engine life, but it drinks alot more but better performance.

So what is the real effect on V power? or doesnt matter what i use.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/226059-32-gtr-using-shell-v-power-fuel/
Share on other sites
paulR32gtr Mentor

paulR32gtr

Posted
Posted

It has ethanol in it yeah or is it just the old optimax 98?

Honestly I just steer clear of shell these days - optimax just went so downhill whereas bp ultimate always seems to be up to scratch.

Are you still on the standard ECU?

Closed loop mode would be where the fuel saving is coming from where the computer tries to bring mixtures up to stoichiometric 14.7:1 air/fuel ratio.

Tamrb26 Enthusiast

Tamrb26

Posted
  • Author
Posted
It has ethanol in it yeah or is it just the old optimax 98?

Honestly I just steer clear of shell these days - optimax just went so downhill whereas bp ultimate always seems to be up to scratch.

Are you still on the standard ECU?

Closed loop mode would be where the fuel saving is coming from where the computer tries to bring mixtures up to stoichiometric 14.7:1 air/fuel ratio.

I got a Power fc so... Oh sht is it bad??

R338OY Veteran

R338OY

Posted
Posted

I love V-Power. V-Power Racing has ethanol, there's a difference.

I'm happiest with Shell, but Ultimate is good too. I've been told they both have heaps of additives compared to Vortex though.

I think fuel damaging an engine is overrated. Not changing the oil often enough is something to worry about.

paulR32gtr Mentor

paulR32gtr

Posted
Posted

You'll be fine don't worry - it's just a personal preference I just noticed my cars would run differently from tank to tank on optimax. Been on BP only for a good couple of years now so a bit out of the loop.

I had a wierd problem where fuel guage was not registering fuel in the tank for a couple of tanks worth of optimax - filled up with ultimate and fuel guage came back straight away.

I do remember quite a while ago a thread about all of this - apparently back then the Optimax started out as a 91 unleaded then was boosted with toluene aromatics and sulphur or something, whereas the ultimate was brewed as 98 at the refinery - sure there are others on here with expertise in all of this. This was quite a while ago and Shell has changed their fuels around a fair bit so maybe other people that use it regularly might be able to comment.

GTR-N1 Grand Master

GTR-N1

Posted
Posted
You'll be fine don't worry - it's just a personal preference I just noticed my cars would run differently from tank to tank on optimax. Been on BP only for a good couple of years now so a bit out of the loop.

I had a wierd problem where fuel guage was not registering fuel in the tank for a couple of tanks worth of optimax - filled up with ultimate and fuel guage came back straight away.

I do remember quite a while ago a thread about all of this - apparently back then the Optimax started out as a 91 unleaded then was boosted with toluene aromatics and sulphur or something, whereas the ultimate was brewed as 98 at the refinery - sure there are others on here with expertise in all of this. This was quite a while ago and Shell has changed their fuels around a fair bit so maybe other people that use it regularly might be able to comment.

You may be right. My wife's BM has started to develop a fuel gauge level that is below what's really in the tank. I complained to Shell who checked only the litres delivered by that bowser. I didn't think it might be the additives. Perhaps I'll try BP for a while...

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
hi peeps, i just recently using V power and i experience it doesnt drink as much fuel. i normaly use BP ultimate but it drink hell alot more then v power.

Iv i heard BP ultimate is better for your engine life, but it drinks alot more but better performance.

So what is the real effect on V power? or doesnt matter what i use.

Thanks!

Is your driving style the same or do you drive a lot harder on BP a opposed to Shell?

Do you drive the car everyday and take the same route?

Tamrb26 Enthusiast

Tamrb26

Posted
  • Author
Posted
Is your driving style the same or do you drive a lot harder on BP a opposed to Shell?

Do you drive the car everyday and take the same route?

im a light footer, i take the same route nearly everyday.

V power feels a bit rough accelerate, while the bp feels smoother.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
im a light footer, i take the same route nearly everyday.

V power feels a bit rough accelerate, while the bp feels smoother.

BTW is this Shell V-Power 98 or 100 RON?

I use to run Shell then I went to Mobil Synergy 8000 then made the switch to BP Ultimate as suggested by my mechanic.

I was told that too, shell feels a bit rough on take off... BP seems to be the overall best fuel out of the fuel companies...

I guess whatever works best for your car...

Tamrb26 Enthusiast

Tamrb26

Posted
  • Author
Posted
BTW is this Shell V-Power 98 or 100 RON?

I use to run Shell then I went to Mobil Synergy 8000 then made the switch to BP Ultimate as suggested by my mechanic.

I was told that too, shell feels a bit rough on take off... BP seems to be the overall best fuel out of the fuel companies...

I guess whatever works best for your car...

i use v power 98.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...