Jump to content
SAU Community

Urgent Plz Help Me Urgently!

WOG BOY

By WOG BOY,
in General Automotive Discussion

 Share

Recommended Posts

WOG BOY Community Regular

WOG BOY

Posted
Posted

hi all, i have the current issue of my key being stuck in the ignition of my car....and from my research the car has to be fully engaged into Park (P) for it to release......

i have put the car into Park and have shaken, and rocked and bumped and everything on the gear stick and it still wont 'click' so that it will release the key.

i have even tried leaving the handbrake off and rocking the car from the outside to try and get it to click into place.....so im stuck!!!

i have work tonight and gotta use my car.......and there isnt secure parking around and yeah u know the drill with skylines..so yeah im in desperate need of help!!!

car is nissan skyline series 2 r33

Cheers

Matt

Link to comment
https://www.sau.com.au/forums/topic/226145-urgent-plz-help-me-urgently/
Share on other sites
THR34T Mentor

THR34T

Posted
Posted
hi all, i have the current issue of my key being stuck in the ignition of my car....and from my research the car has to be fully engaged into Park (P) for it to release......

i have put the car into Park and have shaken, and rocked and bumped and everything on the gear stick and it still wont 'click' so that it will release the key.

i have even tried leaving the handbrake off and rocking the car from the outside to try and get it to click into place.....so im stuck!!!

i have work tonight and gotta use my car.......and there isnt secure parking around and yeah u know the drill with skylines..so yeah im in desperate need of help!!!

car is nissan skyline series 2 r33

Cheers

Matt

not sure if this will work but have u tried shaking the sterring wheel till it locks/clicks? my key normally gets stuck sometimes and/or wont start until ishake the steering wheel its weird. maybe you should give that a try?

nizmonut Community Regular

nizmonut

Posted
Posted

undo the gear shift surround'

you will see a cable linkage that goes from the gear shift up to the back of the ignition tumbler,

it has obviously stretch or being damaged at some stage, look and study the mechanisim see which way it has to move when being in park then give it an extra pull and you should hear the ignition click

once the key is out undo the lower steering column cover and remove the cable all together and that way you should be able to remove the key anytime once it is in the off positon....most auto trans have an inhibitor switch that will prevent them from being started unless they are in neutral or park.

it is designed to stop car thieves and hijackers ripping the keys out of the ignition when at lights etc etc.

Secret32 Explorer

Secret32

Posted
Posted
undo the gear shift surround'

you will see a cable linkage that goes from the gear shift up to the back of the ignition tumbler,

it has obviously stretch or being damaged at some stage, look and study the mechanisim see which way it has to move when being in park then give it an extra pull and you should hear the ignition click

once the key is out undo the lower steering column cover and remove the cable all together and that way you should be able to remove the key anytime once it is in the off positon....most auto trans have an inhibitor switch that will prevent them from being started unless they are in neutral or park.

it is designed to stop car thieves and hijackers ripping the keys out of the ignition when at lights etc etc.

Great response nizmonut, I was going to suggest starting the car back up and moving car and attempting to remove key again. However your response seems alot more comprehensive and educated... lol :blush:

Proximity Motorsport Experienced

Proximity Motorsport

Posted
Posted

in my old silvia i had key set to acc on so i could turn wheel when i was changeing steering wheel and when i was hitting the bastard it locked on.

I took off the trim around the key area and on the actual ignition barrel there is a lil hole with a switch inside it, i just flicked it the other way and it worked.. If all else fails PM me and ill take a pic of what im talking about

SKYL1N Mentor

SKYL1N

Posted
Posted

+1 for turning the steering wheel.

i was once pulled over by highway patrol where they asked me to take keys out of ignition

i was there for about 3 minutes trying to get them out when he told me to turn the wheel

very embarrassing for a fresh p plater

WOG BOY Community Regular

WOG BOY

Posted
  • Author
Posted

hey guys sorry for the slow and late reply...well it turned out i couldnt get the key out...(i didnt have enough time to remove all the surrounds and correct the cable so that is the weekend job)

basically i got home from work at midnight......(my car parked in the driveway, unlocked and with the key in it...only security was a a car semi parked across the back of it so it made it really difficult to move it out).....i know very silly and dangerous but i had to get to work.....cos i only have one key cos the dealer only gave me one when i bought the car.....

but yeah when i got home, i gave it another almighty wriggle and then it came out....i have used the car several times today and the key is still 'sticky' where it is difficult to get out however comes out after a few seconds of intense wriggling! today i got another copy done...so it isnt keyless entry but at least if it happens again i can still lock the car with the other key manually!

so yeah, dunno if the key barrel is dying....or what......otherwise the cord is the issue!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Therry
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By Therry · Posted

      Both windows operate normally while the engine is running but start to sag as soon as I switch off.  Does anyone know of reasonably priced replacements or other brands that will fit?
    • Duncan
      R32gtr sputtering and stalling

      By Duncan · Posted

      Actually PowerFC is probably the easiest to get basic data from, it comes with a hand controller and display so you don't need to remember to pack a laptop every time you drive. It also has a PC based viewing/logging option if required. Nissan used consult on these because back in the mid 80s, ODB was just a glint in a standard's body's eyes.  They switched to OBD shape around 2000 (my 2001 Cima had OBD shaped but not OBD compliant port) With the standard ECU there is a cable and software available to give basic data too, I think it is called Nissan Data Scan or s
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      Given by the sheer number of questions about offset, absolutely not. If you had the information formatted this way: Space from R34 GTT hub to outer arch = 100mm Space from R34 GTT inner hub to nearest suspension arm = 90mm. (making this up) Buying a wheel that was advertised as Enkei RPZ5 Diameter 18in Width 9 Distance to arch = 84mm Distance to suspension arm = 76mm 100% of people would know instantly if it fits. They would absolutely also know instantly how close it fits too, and no questions would need to be asked. You would know you would have 16mm from the guard and 14mm from the suspension arm.
    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      Ah ok, for example for the apexi ecu I heard that it's pretty limited with the information it can give you. Also not sure why Nissan used the consult port over the obd2, what the idea there was.
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      Diagnosing with and without is mostly the same. You need to know, as Duncan asked, and what conditions. Car hot, cold, idling, driving, if while driving what rpms, is when you're varying, or is it when held constant.   From there it's understanding what can be causing it. Starting with pretending all of the sensors are correct. Which means if it's going rich, why would it be thinking more air is going in than it is, and under what conditions. So things like if only when under boost, it could be be a loose intake piping joint. It's just understanding the system, and understanding when/how the problem occurs, and then if it's only occuring in specific scenarios, what can be causing it.   ECU specifically, if it's aftermarket, it'll have software you can use, for the Skylines on factory ECU, there is Nissan Consult you can use. Most ECUs have a way to get data from them.
×
×
  • Create New...