Rb25 Gearbox Bearings/syncros

[Kruges]

hey fellas im going to freshen up the box in my r33 gtst and im just wondering whats out there in the way of bearings/syncros for this box, what yous have used, and if at all possible, prices. cheers guys,

sam

[Kruges]

bearing part numbers? im at a bit of a loss on where to purchase bearings for this box... if anyone has done a rebuild before where did you find them?

Edited July 2, 2008 by freddy

[NYTSKY]

Call Nissan and tell them what you are after.They will quote you on parts. Or you could buy a brand new box from RHDJapan for 2k delivered.

[sweefu]

I know this is a very old thread, but for the help of future searches I am going to link to the thread with the RB25DET gearbox bearing part numbers below.

http://www.skylinesaustralia.com/forums/topic/335298-rb25-gearbox-bearing-numbers/

[89CAL]

Use these guys for the bearings and synchros

http://www.austtrans.com/

I went to a bearing shop in my town for a quote on a kit and he stupidly told me they get there kits from these guys and I managed to get the bearing kit and 2 or 3 synchro rings for cheaper then JUST the bearing kit was gonna cost me locally

Forget who I talked to there (was at the brisbane office) but he was really helpful and I got great service

[sweefu]

Great tip, thanks for the link.

Do you recall what the cost of the bearing kit was?

[89CAL]

All I remember is everything was less than $500...... or I think so anyway lol. Think the bearing kit was around $300 but again not 100% sure. Pretty good little kit to

[89CAL]

This is the kit. Has a gasket as well. Dont mind the packaging. I pulled some of it out for a look