Boost Signal

[jimnjodz]

hey wots the most reliable and accessible boost gauge vacum line too use in my r32 gtr as its running 1 bar boost n i havnt installed a boost controller yet and was wondering if my gauge was wrong ive plumbed it into the wot i assume is the map or boost sensor on the drivers side firewall between the brake booster and vacum accumulater for the booster thanks.

[DLOOOK]

its running ~1bar without a boostcontroller because the restrictor has been removed from the stock solenoid. the stock solenoid located on the drivers side tower, has two hoses look for the one with the yellow band around it . pinch around the yellow band if it feels soft , then the restrictor has been removed.

BTW your boost signal is where most people get theres from

[jimnjodz]

its running ~1bar without a boostcontroller because the restrictor has been removed from the stock solenoid. the stock solenoid located on the drivers side tower, has two hoses look for the one with the yellow band around it . pinch around the yellow band if it feels soft , then the restrictor has been removed.

BTW your boost signal is where most people get theres from

thanks aye i knew there was a restrictor there smewhere kool