Oil Cooler Lines Size?

[GreeceS13]

I will fit an oil cooler because I think that my rb26 will boil...

AN 8 hoses are good for oil cooler?

[J'z-R33]

Depends what oil cooler and sandwich plate you buy.. most of them come as a kit cooler, lines, sandwich plate..

Im running -12.

[Beer Baron]

-8 is too small. -10 or -12.

[GreeceS13]

Just jap oil coolers are 8AN... all chinese oil coolers are 8AN.

And unfortunatly I don't have money for jap brand oil cooler

They are unbelievable expensive...

I read for many people in the forum that use Just Jap kits!

It will work or now?

[fletch rb30]

just grab some 1/2inch pushlock hose and fittings from your local hydraulic supplier, its a lot cheaper than the flash looking braided hose and will do the job just as well, then you can still but a decent cooler without spending too much.

im running swagelock hose and fittings, i could have got cheaper hose but my work has an account with them, its rated to 200psi at 200degC, and it cost me about $40nzd/$33aud, plus a decent cooler and filter mount from trademe - nz version of ebay. total cost around $200nzd/$170aud for big cooler, quality lines and fittings, and remote filter.

A mate used hydraulic fittings and plain pushlok hose and china cooler and did it for half the price

[GreeceS13]

I can buy 10AN braided hoses and alloy fittings no problem.

But where to find oil cooler with 10AN? I bought one the same as the jast jap... 8AN!