Jump to content
SAU Community

Recommended Posts

  RubyRS4 said:
Last time I did a track day on the bike, I was driving back when all the 'drifters' were on their way in. So many cars driving (not towed) past with missing bumpers, intercoolers standing out like dogs balls, loud systems, existing damage ... and they wondered why they got picked on. :P I agree the cops should play fair, but don't go sulking when ya cars are inviting the cops to nab you.

i wasnt saying it was ok i was agreeing with deluxe about people who drive their cars there that are ready for track should exspect what happens.

i went to watch the last big event at lala and was done for half a cm to low, that was it nothing else and other then that my car was 100% road worthy but ive been done for 'suspected to loud' when the car wasnt even running and i also have been sent to regency because after i got my car painted i had no tyer placard. a $5 sticker ended up costing me $135 plus missing 2 days of work. there really needs to be some sort of slack and the quota's need to be canned!

P plates in the window are like a homeing target for cops to a car :)

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

In sydney they have been targeting imports for a few weeks, In particular behind kingscross down at harry's several people have been done. Thankfully they seem to listen to our ideas? Maybe they frequent these forums and are actually listening to people with half a brain.

  Import S13 said:
P plates in the window are like a homeing target for cops to a car :(

Its no different to how it was when I was on my P's back in 95 and living down south.

I had a little TE Cortina 4speed; exhaust, cam and holley and low. That thing was always picked on by the police due to its nice idle and ride height. Awesome little car that; burnout machine and had no issues whooping the back then quick VN 5ltrs. :)

ah cubes these youngs ones think defects are just for imports lol you remember the good ole days glenelg carpark near the jetty lol cops blocking the entrence and people driving over the kerbs to get away . i had my fair share of defects with a 307 chev in a lc torrie and that had been aproved by regency at the time lol .

ah the good ole days when a defect was still a defect

  Cubes said:
Its no different to how it was when I was on my P's back in 95-98 and living down south.

I had a little TE Cortina 4speed; exhaust, cam and holley and low. That thing was always picked on by the police due to its nice idle and ride height. Awesome little car that; burnout machine and had no issues whooping the back then quick VN 5ltrs. :(

I hade a 250 x-flow cortina back in the day stock as a rock but could still put on more of a show then the v8 boys :)

I dont think cops pick on imports at all, iv got a lot of mates with holdens and fords who get defected a fair bit not because of the driving but the mods they have. If you mod your car then you pay the price

  heslo said:
Well I just got defected again tonight! Asshole pulled me over for no reason and sent me off to the pits... second time in as many months. Fun fun fun

Your one unlucky mofo. Sorry to here dude :(

:( You're telling me Chad! Ah well, what can I do? Gotta get it cleared or I can't drive the car, simple as that. If anyone here has some stock 33GTR suspension and wants to help me fit it that would be awesome and save me some dollars. If not I'll just take it to Synergy again and get them to deal with it for me and save me the clusterf**k
  heslo said:
:banana: You're telling me Chad! Ah well, what can I do? Gotta get it cleared or I can't drive the car, simple as that. If anyone here has some stock 33GTR suspension and wants to help me fit it that would be awesome and save me some dollars. If not I'll just take it to Synergy again and get them to deal with it for me and save me the clusterf**k

Fark... thats BS.... did you not have the paperwork from last time u went thru regency?

I for one would take that defect slip and the one from last month to a magistrate.... see what they say...

-D

  heslo said:
Yes but you see last time I passed Regency I removed the bonnet and the seat, now they are back on, I doubt I have a leg to stand on

Well firstly I don't see how they can defect you for a seat, provided its secured to all 4 fixture points and is ADR approved. And even if not, did they take photos? And whats wrong with the bonnet? Defecting you with either of those two is a bit petty.

If they didn't take photos, then chuck the stock stuff on, call up the courts authority and say u want to challenge the defect as it was only passed within the last 4 weeks.

Speaking of defects, I'm in the process of moving my boost controller. Aiieee what a job. So much dodgy wiring under the dash. I disconnected the earth to the boost controller and the alarm went off *sigh*

Gotta love DIY japanese electronics. Cableties, twisted wires and electrical tape. Dude obviously never heard of a soldering iron and heatwrap... :banana:

-D

Well it's a Bride racing seat, don't think they have ADR approval and the bonnet is carbon fibre again, no ADR approval. No photos were taken, however he did state on the defect sheet that "racing seat must be removed"

  heslo said:
Well it's a Bride racing seat, don't think they have ADR approval and the bonnet is carbon fibre again, no ADR approval. No photos were taken, however he did state on the defect sheet that "racing seat must be removed"

chuck the stock one back on.... they look like racing seats, you could argue that he assumed that both front seats are racing seats cause theyre sculpted ;P

-D

PS Not much u can do about the bonnet except to paint it... Its a different color from the rest of your car?

Edited by Dohmar
  heslo said:
I agree, not all cops are bad. And yeah, it does suck, got a week off this week after about 6+ months in the planning and I won't have my car, only my crappy work ute :)

I'd ring up regency and ask them about it... say that you've still got the stock stuff on and see what they say...

I'd also call up the magistrates court and speak to the day solicitor about it...

Put the stock stuff back on mind you. Regency may simply wish to confirm you've got the stock seats and bonnet and not charge. I'm really not sure how it works cause I've never been defected but if I did, thats where I'd start. If you get no love, try the legal aid commission and ask them there, or transportsa. I've seen a bunch of commodores with carbon fiber bonnets and they never get defected for the bonnet... thats just anal...

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I know it's an entirely different engine, but I noticed practically 0 difference removing or adding 2x 3in (5inch body) 400cell cats (one in each bank) with regards to sound. So changing the cat to change drone I suspect will have very very, very, very, very, very very minimal impact.
    • 200 cell cat will probably help. Do you have room to tee off a Helmholtz resonator anywhere along the exhaust? These can do wonders for drones, with a little experimentation with regards to length.
    • The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
×
×
  • Create New...