My Build With Rb30/26

[HR31DRFT]

HR31 Autech Skyline.

With a full silhouette racing kit

Currently RB20det sil top

R33 turbo

Stainless dump

Full 3" system "jap writing on xorst" hks???

No cat

Electrics

E-boost2

Omori gauges, oil temp/pressure, volts, water.

No cd player or that jazz

Bee*R

Be-time turbo timer

Driveline

Kaaz 2way

Xtreme lightened fly n xxhd clutch

Suspension

JIC coil overs

Cusco strut braces

ARC sway bars

Tomei hi-cas lock

Induction

Fmic

Stainless piping

GFB b-o-v

HKS mushroom pod

Steering

Extra steering lock "dunno what they've done but its crazy"

Also udjustable other goodies

Rims n Brakes

Volk Rays 3pc rims

Std brakes

Cusco master cyl stopper

Lubrication

Perma cool oil cooler "fat ass mofo"

Braided lines made by mwah

Eaton aeroquip lightweight race fittings

B+M oil thermostat

Interior

Full cage

Bride Jeta old school fixed back racing seat

Simpson racing harness

Nice drifty wheel

No sound deadening

Now soon to be featuring a fully built RB30/26

Consisting of...

RB30et block "which i scored 4 $50"

RB26 head race ported, 95% fully machined head, with new covers, intake etc

Mahle forged pistons

Spool forged rods

Spool cam gears

7ltr sump High energy

Ally metal jacket harmonic bal

Tomei h/v pump $$$$$

ACL race bearings all round

Fully re-line bored

Full length crank collar

All crank work done

Grub screwed etc all the jazz ! Cost me a fair bit in block work, pretty much blue printed

Xtreme fly std weight for "inersia" good 4 drifto

Xtreme motor sport clutch "same as Borneo's ceffy" custom made for me.

Head work is still 2 be set,

Going TO4Z HKS turbo kit "woot woot"

So much more but cant remember atm

Just put this up will do a lil better not the best on a compy atm so if any pointers on this let s no :-)

Edited July 3, 2008 by HR31DRFT

[HR31DRFT]

Tell me what you think, comments welcome

[unique1]

another tough 31 in perth good to see mate, the old 26/30 is a good peice of gear and cheap too for a good setup, im planning one myself soon i got all the stuff just need to decide what i wanna do with it lol

you didnt buy the block a couple of weeks ago from another r31 owner did you?

[HR31DRFT]

Cant say it was cheap..

I've had the rb30 block for a while.

[Wheezy]

How do the ARC sway bars go in the car?

I am thinking about them for my coupe also, but for $1K delivered I want an improvement.

[HR31DRFT]

How do the ARC sway bars go in the car?

I am thinking about them for my coupe also, but for $1K delivered I want an improvement.

Dude!!

I can throw up a couple of pics of them installed.

All i can say mate its everything u want from a tough sway bar, delivers 100%.

[Wheezy]

Even though they are hollow?

Whats the OD of the material and wall thickness (at a guess I suppose)

Pics would be ace

[HR31DRFT]

ok thats something i didnt no, put your finger to ya thumb and thats how big. sorry no tape

I've seen whiteline stuff but in my opinion they dont come close.

I'll chuck some pics up for ya later today bud.

[Wheezy]

ja. Whiteline rear sway bar for HR31 is actually inferior the the stock hollow 25mm ones.

Its a 20mm solid. That simply does not compare to a 25mm sway bar hollow or solid.

Cheers.

I will await pics

[Sydneykid]

The Group Buy Selbys Swaybars are $244 each, buy 2 and you get them delivered free. That's adjustable swaybars as used on Giant's R32GTR at Tsukuba, John P's 300ZX and over 100 SAU guys that have participated in the Group Buys as follows;

R33GTST

http://www.skylinesaustralia.com/forums/in...showtopic=85467

R33GTR

http://www.skylinesaustralia.com/forums/R3...tel-t87826.html

R32GTR

http://www.skylinesaustralia.com/forums/in...showtopic=87521

R34GTT

http://www.skylinesaustralia.com/forums/in...showtopic=88141

R32GTST

http://www.skylinesaustralia.com/forums/in...showtopic=85591

Cheers

Gary

[Sydneykid]

ja. Whiteline rear sway bar for HR31 is actually inferior the the stock hollow 25mm ones.

Its a 20mm solid. That simply does not compare to a 25mm sway bar hollow or solid.

Cheers.

I will await pics

The Whiteline catalogue only lists the common part numbers. They take less than half of the applications we have. In Selbys Swaybars we make 20 mm, 22 mm, 24 mm, 26 mm, 27 mm, 30 mm and 32 mm rear swaybars for HR31's, adjustable if you want.

Cheers

Gary

[Wheezy]

Ah that right.

Whiteline et al purchased selby's years ago.

Might be worth a phone call

[HR31DRFT]

Few pics of my front sway bar

[unique1]

sorry i didnt mean cheap i meant cheaper than a stroker kit for a 26, which is around $10 000 for crank rods and pistons alone, now thats called not cheap ive done the stroker kit on my 26 and now im gonna do a 26/30 engine as well, so i tend to use cheap in the wrong situations after spending money on the first engine lol

Edited July 4, 2008 by unique1

[HR31DRFT]

sorry i didnt mean cheap i meant cheaper than a stroker kit for a 26, which is around $10 000 for crank rods and pistons alone, now thats called not cheap ive done the stroker kit on my 26 and now im gonna do a 26/30 engine as well, so i tend to use cheap in the wrong situations after spending money on the first engine lol

haha all good man, its a thousand for this a thousand for that, damn it gets outa control.

[Wheezy]

Cheers for the pics mang. Gives me something to think about, do you have any rear sway bar pics?

[acsplit]

The Group Buy Selbys Swaybars are $244 each, buy 2 and you get them delivered free. That's adjustable swaybars as used on Giant's R32GTR at Tsukuba, John P's 300ZX and over 100 SAU guys that have participated in the Group Buys as follows;

R33GTST

http://www.skylinesaustralia.com/forums/in...showtopic=85467

R33GTR

http://www.skylinesaustralia.com/forums/R3...tel-t87826.html

R32GTR

http://www.skylinesaustralia.com/forums/in...showtopic=87521

R34GTT

http://www.skylinesaustralia.com/forums/in...showtopic=88141

R32GTST

http://www.skylinesaustralia.com/forums/in...showtopic=85591

Cheers

Gary

Do you have to do you sales pitch in every thread maybe he should buy some bulshit standard spec bilstiens too.

good luck with the build mate!

[Wheezy]

AC you and I both know that I can get them direct from white line anyway...sall good

Edited July 5, 2008 by Wheezy

[HR31DRFT]

yeh i would appreciate as lil crap in my thread as possible, but i'm always willing to help another.

Will get some rear sway's pic later today cool cool

[shanef]

whats the specs on the head?

got any pics of the ports/chambers?

i bet you cant wait til you get to first fire the beast up