Jump to content
SAU Community

Recommended Posts

*** July Group Buy Special on QFM High Performance Brake Pads ***

GSL RallySport stocks the complete range of QFM High Performance Brake Pads, and for the month of July is having a group buy special! Half Price Rear Pads!

We've got 8 sets to group buy off only! DB1170 (Front) and DB1220 (Rear), suit R32 GTS-T, R32 GTR, R33 GTS, R34 GTT. Fit anything with the standard 'Nissan' 4 pot/2 pot front and rear brakes. Brembo QFM pads (DB1520 and DB1521) are also available off the shelf and ready to go!

- 3 sets of A1RM Front and Rear Normal Turbo Pads. $119 + $59.50 + $12.50 shipping = $191 delivered!

- 3 sets of HPX Front and Rear Brembo Pads. $110 + $55 + $12.50 shipping = $177.50 delivered!

- 2 sets of A1RM Front and Rear Brembo Pads. $149 + $74.50 + $12.50 shipping = $236 delivered!

QFM's Performance Street pads fall into two compounds. The first is the HPX pad which is an excellent choice for street cars looking for excellent braking performance whilst retaining all the qualities of a good street pad. The HPX pads are ideal for high performance street cars looking for higher working temperatures with reduced fade, and also for Four Wheel Drives or vehicles looking to enhance their towing capacity or safety.The HPX pads unlike many pads in this performance range are virtually dust free, whilst maintaining low rotor wear.

QFM's second high performance street pad is the A1RM compound and provides QFM with its club sport track pad. It is ideal for high performance street cars that take to the track to test the limits, whilst still being a streetable pad. The A1RM is ideal for club level rally and hill climb where brakes are required right from the first corner!

SPECIFICATIONS

Formulation - Cold Friction - High Friction - Temperature ©

HP-X - 0.41 - 0.42 - 0-550

A1RM - 0.40 - 0.48 - 0-780

For more information checkout www.qfmperformance.com

With such a limited number of pads, it's first in first served by PM with people's full name, delivery address (preferably business), and email and I can email through an invoice with direct deposit details.

Any questions let me know.

Edited by jetpilot1986
  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

I have an R34 GTT. Should I go the A1RM normal turbo pads or the HPX brembo pads?

Thanks.

Hi mate,

The GTT should just use the normal turbo pads, not the Brembo calipers. Just double check that your pads look like this, front:

http://www.bendix.com.au/catalogue/images/...Inner_Outer.gif

rear:

http://www.bendix.com.au/catalogue/images/...Inner_Outer.gif

Which we've only got in A1RM in this group buy. If you just wanted the HPX pads, that are basically the better all round performance street pad (the A1RM, although brilliant in performance, can be a slightly dusty pad), then we should have the HPX in the next group buy.

Oh and another question. These hpx pads... How do they go with the rotor... Are they harsh as im only really using them for the street and very minimal track work. Basically i want a pad thats gonna give me a bit more bite than standard. Im also looking at the ferodo ds 2500.

EDIT: Scratch the ds 2500... read the braking thread and seen they not the best for street.

ds2000 or lucas or HPX.

Thanks

Edited by wisey18

is there going to be a group buy later on in future? i want to get the A1RM (front & rear) for brembo but i dont really need it now. but if this a once off send me your details for it.

just to confirm, are these the same pads from this group buy: http://www.skylinesaustralia.com/forums/Ad...l&hl=qfm%2A

K750 model?

cheers :)

EDIT: Scratch the ds 2500... read the braking thread and seen they not the best for street.

ds2000 or lucas or HPX.

Thanks

I was going to say, if you're after a good all round street pad, without rotor wear I wouldn't have been going the DS2500s!

We'll have a few sets of the HPX in stock soon, and I'll get the next group buy of pads happening as soon as possible. Otherwise I've got the Lucas pads on the shelf here now, $65/$55 front/rear. But I'd hold out for the HPX as they are a less dusty pad with similar performance.

is there going to be a group buy later on in future? i want to get the A1RM (front & rear) for brembo but i dont really need it now. but if this a once off send me your details for it.

Hi mate,

Its not a one off, but with the Brembo pads, its a custom order, so not something that we always keep in stock.

just to confirm, are these the same pads from this group buy: http://www.skylinesaustralia.com/forums/Ad...l&hl=qfm%2A

K750 model?

I dunno mate. The K750 is a pad produced specifically for a certain distributor. We're not privy to the various compound make-ups, suffice to say its a very similar pad.

Any other questions just let me know.

Regards,

Greg

Hey Greg, I forgot the ones I got last time a few months back from you, if you rememebr also, got any left?

Cheers!

chris

Hey Greg, I forgot the ones I got last time a few months back from you, if you rememebr also, got any left?

Cheers!

chris

Hi mate,

Yep, you got front and rear A1RM to suit normal turbo brakes. They have gone up slightly since then, and are $191 for the complete set delivered. Got two sets left in this group buy, just let me know and I can email you through an invoice etc.

Regards,

Greg

Hi jetpilot,

I bought the QFM brakes off you quite some months ago now for my R33 but they are have become really squeeky/noisey. Its embarassing. Can you shed some light on this because honestly it was one of the selling points from you that made me buy then and they are not quiet. Appreciate if you could send me a PM to see what can be done. :D

Edited by Xizor
Hi jetpilot,

I bought the QFM brakes off you quite some months ago now for my R33 but they are have become really squeeky/noisey. Its embarassing. Can you shed some light on this because honestly it was one of the selling points from you that made me buy then and they are not quiet. Appreciate if you could send me a PM to see what can be done. :D

Hi mate,

That's unusual! Were they A1RM or HPX pads? How long after you fitted them did it start? Did you machine the rotors? Did you re-fit the original shims? Squeal is caused by vibration between the backing plates and the caliper itself (nothing to do with the pad material itself), and so, depending on machining tolerances, some calipers will do it not matter what pads are in it. Try some Loctite 3 (permatex) on the backing plates as often this is a better fix than the proper anti-squeal stuff.

Regards,

Greg

*Update*

Only one set of Normal Turbo A1RM left! Still a couple of each in Brembo.

A set of Brembo A1RM sold, which only leaves one more set!

Still 3 sets of HPX Brembo, and 1 set of normal Turbo A1RM.

A set of Brembo A1RM sold, which only leaves one more set!

Still 3 sets of HPX Brembo, and 1 set of normal Turbo A1RM.

1 Set of Brembo HPX Brembo Sold!

Leaving:

2 x Sets HPX Brembo

1 x Set A1RM Brembo

1 x Set A1RM Normal Turbo

Regards,

Greg

*** Update ***

Another set of A1RM Brembo and Normal Turbo Brakes sold... leaving only:

- 3 sets of HPX Front and Rear Brembo Pads. $110 + $55 + $12.50 shipping = $177.50 delivered!

*** Update ***

Another set of A1RM Brembo and Normal Turbo Brakes sold... leaving only:

- 3 sets of HPX Front and Rear Brembo Pads. $110 + $55 + $12.50 shipping = $177.50 delivered!

Will these fit a GTT? If so put me down for a set. :D

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...