Jump to content
SAU Community

Recommended Posts

But its the stickers that seperate them and make them stand out as "something special". :woot:

Taking the stickers away would be like putting GTR badges on a GTS. Its makes your car look dumb instantly, and ppl assume the same of the driver/owner LOL

Not trying to spark a debate or anything, just my opinion :D

taking the stickers away would be like taking the GTR badge off a gtr, so it'll still be the same car.. just abit more like a sleeper.. if ur into that.. (most people cant tell gtst from gtr unless its badged.. unless they own one)

  • 2 weeks later...

i had a evo 6 for 2years or so, it was the first evo 6 evo imports sold.

it was there compliance test car & so was in excellent stock condition. i did the usual mods (zorst, piggyback ecu, ebc, intake, coilies, chassis braces). in the end it put out 300hp at all 4 it had heaps of response/bottom end but midrange/topend was seriously lacking, so not my kind of 'fun' turbo car. handling & roadholding was great as well as reliability - nothing ever broke or wore out in 40k kms of my ownership.

now lets compare 6/7 (hardly any differences really with the 6/tme, mainly cosmetic)

evo 6 has slightly bigger turbine housing (same size as 8MR)

evo 6 weighs 1360kg, evo 7 weighs 1400kg so not a lot of difference at all there

evo 7 has slightly longer wheelbase & slightly wider track. also stock rims are 17x8 as opposed to 17x7.5

evo 7 has stronger rear diff, some people can have issues with the evo6 diff & then upgrade to the later one

evo 7 has much better recaro seats than the ones in the 6 - much better lateral support.

evo 7 ECU can easily be reflashed, evo 6 can only be done by 1 person in SA.

evo 7 has nicer steering wheel.

35k is way too much for a stock evo 7 from a dealer. you should be able to get a very nice one for around 28 or so.

evo imports (& the other main evo dealer) can afford to have asking prices in the higher ranges cause they get plenty of 'walk ins' that will pay those numbers & because the cars are ready to go.

the warranties are very limited in actual payout amounts for each type of fault.

cheers

whilst not an evo, i've got a legnum, which has the AYC and a few other bits and pieces from the evo 4-6 range,

i love the AYC system, it has an aggressive feel to it, yet is easy to control, and if you push it too far, it tends to oversteer, so it doesnt feel like you are going to fly off into a ditch in a hurry. (that could be due to my wagon being obviously more rear end heavy though...)

ive test drivin an evo 8 from evolution imports, damn i was impressed if i could afford to have one of them and a skyline i would for sure!! heaps of room in the back seat 4 doors, nice and roomy like a big family sedan but just with rally bred performance!! buy one

An Evo is a totally different animal to a Skyline, and as a performance car probobly a better proposition for the most part.

4 doors gives you practicality, and sure you can get a 4 door skyline but for the most part they dont really have much rear space.

For tight twisty stuff, no GTR will touch an Evo - they are just so chuckable, and when you think they are out of grip they just dig deep and give you more.

Sure they dont have a big motor so arnt really a top end monster with the standard turbo etc, but thats not what the car is about.

They also seem to be more reliable for the most part then most other japanses turbo cars - dont spin big ends like dak dak subarus and dont drop oil pumps and all the rest of it with GTR's. But they arnt perfect, and clutch changes are hell for whoever does them. Being a Mitsi, avoid ones from snowy areas in Japan as they will be the ones to get rust cancer first. Typical roof rust issues, which seems to have existed from day 1.

I've been lucky enough to drive 6 TME, 7 JDM, 7 GTA (auto - interesting!), 8 Aus, 8 JDM and 8 MR. Id rather a 7 then a 6, just feels like a more competent car, but the 6.5 sure feels pretty raw, and thus fun.

Interestingly, the first Jap 8 I drove happened to be Nigels after he sold it :blush:

Edited by teejay

I have driven an Evo 7 and its very nice - quick point to point car.

The only criticism would be the interior - its pretty ordinary - even compared to a humble skyline.

I guess the decision ultimately is a personal one.

:thumbsup:

taking the stickers away would be like taking the GTR badge off a gtr, so it'll still be the same car.. just abit more like a sleeper.. if ur into that.. (most people cant tell gtst from gtr unless its badged.. unless they own one)

and you don't have to worry about traffic light warriors "wanting to beat a GTR" all the time.

Sleeper ftw! :devil:

  • 3 weeks later...

after having 33gtst 34gtr and 34gtt, i thought my next ride will be the 35gtr how ever with the price of fule n me not doing as well as i use to in the "savings/spendings" i had a look around and drove lots of diffrent cars. a few bmws, audis, stis. gtirs, and evos.

every car has its advantages n dissadvantages. I found the EVO 8MR a very practical and fun ride. only if it had a little more top end and less clutch problems and rust. one thing that grew on me is the fact that you will drive past a cop and most of them wont look 2wice at you. thinking ur in a lancer :D IM SICK OF YELLOW STIKERS and FINES GOD KNOWS IV HAD MY TOWNS SHARE.

the 1st 3 gears in the MR are extreemly fun, it loves the wet and bumpy roads. and did a 12.9 in a fully stock MR down the mile.

drive a few and know ur in for some high driving costs, maintanace and insurance.. however at least less drama with the cops and less attractiveness..

For tight twisty stuff, no GTR will touch an Evo - they are just so chuckable, and when you think they are out of grip they just dig deep and give you more.

and it doesn't end with GT-R's either TJ. When I went to Bathurst last year, the EVO's absolutely creamed ANYTHING in the production races - Porsches, Lambos, Lotus, HSV. The gap would close on the big straights, but the time the EVO gained up through the top of the mountain (paticularly Skyline) cancelled out any lost advantage in top speed.

2ebbsdh.jpg

Was awesome to watch, and the above was often the view every single time they approached my vantage point!

Edited by gun-r32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • $53.35 and a double din Pioneer head unit that I have...
    • Put a camera facing your dashboard so you can film the gauges. Head out to a straight but of road, and filming it as you go from a stand still at wide open throttle to as fast as you can/feel comfortable doing. Then film the dash board as you for example accelerate like normal onto a freeway. This will give us an indicator from Speedo of your expectation of slow, and will give us the rpm reading too to see if it's shifting. (Auto still has tacho from memory)
    • Buy yourself the cooling system pressure tester. Being able to pump it up, and have a gauge on it, AND have a cold engine makes it much easier / practical to diagnose. Additionally as the engine isn't running, you can listen for pin hole leaks as well as watching if pressure drops away. In addition, you can pressurise and while doing so, watch all the little rubber hoses. Some fail very brittle, and will just leak, while others can end up very soft and bulge. While a bulging hose isn't necessarily leaking, one of those small ones starting to stretch / expand in a bad way is an indicator that you'll be looking to replace that one soon   Depending on if this is a project car, or you'll be dailying it in the summer months would alter how I'd be most comfortable with driving the car and how I'd replace. If you're planning to use it as a daily, with no backup, I'd pull the engine, and replace all the external oil/water lines in one big swoop. At the same time do the timing belt, water pump, tensioners etc. Do not open the engine at all. We just want to replace all the things that are inexpensive as a single item, but a PITA when they go. By doing the above, you've made the car from a bunch of age related issues more reliable. If it's a project, and you like swearing while trying to reach into dirty hard to reach places to replace a single hose that may or may not be the leaky one. Just replace the leaking/bad ones as they need it. If it's a project and you'd rather swear at the car once and enjoy it as much as possible, then refer to the process I mentioned in how I'd want to do it if it were a daily. However, the approaches above do come down to how much spare pocket change you have. Pulling the engine and dropping over a thousand dollars on parts, may not be practical for you. Oh, if engine outing, I'd replace as many silicon/rubber inlet joiners as possible too.
    • Yeah, they're pretty dumb though...ie; they'll throw a solenoid error if the solenoid is dead, shorted, wiring is open circuit, or even if the driver transistor has failed (they can't self-diagnose much, they can only test inputs/outputs)... but if you wanted to try, I believe it's this protocol....(uses a long pulse indicator with short pulse counter)...    
    • Yeah I'll do what I can without taking off any major parts for now. If it becomes clear I won't get far with the engine in the car I'll have to think about the next steps. I am not too stuck on keeping everything 100% OEM, if there is better solutions, like converting most lines to braided with AN adapters, I'd rather do that than buy overpriced new "shit" parts.
×
×
  • Create New...