Jump to content
SAU Community

Lpg Stagea Rs4 Series 2

RS4StagMan
 Share

Recommended Posts

RS4StagMan Rising Star

RS4StagMan

Posted
  • Author
Posted
Any chance of seeing more pics of the rear end and tank set-up?

I went in to see my installer today but he is worried about the tank clearance.

Here's a few photos attached. The tank sits about 200mm from the ground and the (drop tank) black cover sits about 180mm to the ground. The exhaust itself and other suspension components as you can see in the photos are much lower than the tank, so no problems there.

Some of the cover needs to be repainted agian as it is prone to stone chip damage- this is after about 12 months/20,000 kms of use, but could easily be removed and repainted again.

post-38455-1216446461_thumb.jpg

post-38455-1216446510_thumb.jpg

post-38455-1216446558_thumb.jpg

post-38455-1216446627_thumb.jpg

post-38455-1216446686_thumb.jpg

post-38455-1216446725_thumb.jpg

RS4StagMan Rising Star

RS4StagMan

Posted
  • Author
Posted
I am going SGI - l am scared of the carby style set up. Without a good installer (you obviously have one) it can be real trouble. I dont plan to crack 200kw in this car.

SGI is great. LiLPG (Liquid Injection LPG) will be better when it finally becomes available.

Anything can be real trouble without a good installer and tuner. That's why Gas Research have a list of recommended fitters (Australia Wide) on their website. The same fitters can probably do SGI as well as i know mine does.

  • 1 year later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      Hi guys, Sorry to butt in and take it slightly off course, although still on the VCAM subject.  I had VCAM put into my Tomei 2.8 bottom end and I struggle to take off because the engine has very little torque caused by VERY low dynamic compression at 60psi. But once off the mark and especially on boost, the engine rev happily all the way to 8000rpm and makes 630hp at 20psi of boost on E85 at the rear hubs. Has anyone had any similar experience or any suggestions on what might cause this low compression at low rpm? I am in the process of converting it into a 8hp transmission and with this low torque, the engine would not even stay running until the throttle is opened to more than 30% and then I loose all vacuum. 
    • blind_elk
      General Admission pass - AGP

      By blind_elk · Posted

      Clearly not. Anyway, gone.
    • Watermouse
      Shockabsorber 101

      By Watermouse · Posted

      Last year I got a set of MCA street coilovers for my turbo Forester after my son hitting a concrete gutter/wall on a small bridge causing the whole drivers side suspension to get bent because the rain just made the car slide out I love them, I think they were $2400. even had a hiccup of have the wrong hub configuration (my fault) so got onto MCA and they sent the correct shock ends overnight parts from QLD, for free!  I was very impressed with their customer service and quality of the product  
    • joshuaho96
      High temp brake fluid?

      By joshuaho96 · Posted

      They've had some weird failures on their brake actuators. One of them was because they added some kind of lubricant to the factory fill brake fluid that aftermarket brake fluid didn't have so it would affect the seals. Another was just mysterious, probably internal corrosion or something eating away at Prius brake actuators. Parts alone for those are a few thousand USD so not a cheap fix.
    • perry_r33
      Skyline R33 S2 Sedan Tail Lights, Impul Gearknob & R33 Coupe 8 Pin Window Switch

      By perry_r33 · Posted

      Selling a genuine Nissan Skyline R33 Coupe 8-Pin Power Window Master Switch Part No. 25401-26U10 Price $300   IMPUL Gear Knob – Rare JDM Upgrade Upgrade your interior with this genuine IMPUL gear knob – a rare and stylish addition to any JDM build. Premium quality, perfect fit, and an authentic Japanese touch for your ride.  Price:$300 Nissan Skyline R33 (Series 2) Sedan Tail Lights Immaculate Condition OEM JDM S2 a pair of OEM Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state. Price:$900   Located in Melbourne (Western Suburbs) – Shipping available Australia wide at buyer’s expense. DM if you need anymore details.  
×
×
  • Create New...