Jump to content
SAU Community

Recommended Posts

hey all,

as the topic states my dipstick keeps blowing out. has anyone ever experienced this?

i had a quick search and nothing came up, also another thing to add is one of my belts is squeeling real bad when i go full throttle, i just had the belts replaced, was thinking that maybe my oil pump is seazing up causing the belts to squeel and excess pressure in the oil gallys,

the dip stick has blown out 2 or 3 times now, its annoying as my engine gets covered in oil everytime it happens, could someone please shed some light on why this could e happening

thanks

mitch

EDIT: forgot to mention its an R33 GTS-t

Edited by weeman1
Link to comment
https://www.sau.com.au/forums/topic/227068-dip-stick-blowing-out/
Share on other sites

had this problem alot... at first it was because my catch can was setup rong.. so sort out your breathers and check if theres too much gunk built up in your rocker cover breathers and baffles...

The squealing on full throttle may be your exhaust manifold gasket.. Thats a common cause that alot of customers complain about when they say "belt squeal"

Also get a leakdown test done and a comp test done.. Because another reason may be too much positive crank case pressure, eg: rings are rooted, ringlands broken, pistons melted.

So thats a rough guideline to follow..

yeah exactly as above, my experience has been that its either

- catch can incorrect

- your engine is f*ked

i'm hoping for your sake that you have recently installed a catch can

if not, its time for a compression test and leak-down test and bring your wallet..

WOW, thanks for that fellas, would never have picked the squeal to be my exhaust manifold, my mate keeps telling me it sounds like ive got a leak there.

LTHLRB: no i dont thrash my car really, im lucky to hit full throttle once or twice a week, ive only got a 5 minute drive to work now so the car probly doesn't even warm up properly anymore, but the problem started about a month ago before i got this job. for the last year ive been doing 100 k's a day up and down the freeway

ive been running 10psi since i got the car, previous owner was running 8, at 10psi it creeps a little to 11psi

with the squeal i thought it would be the belts cause it does it on start up occasionally

does anyone know any good workshops around castle hill/baulkham hills? ive only just moved down here so im still new to the area

yeah i had this problem as well when i first got my car, it kept blowing dipstick out it was caused by a stuffed piston had a hole in it.

is your car still running on all 6? if it is it could be worn rings. Hey if ya want to ya could do a compression test ya self and buy a compression tester from autobarn or supercheap one what screws into your spark plug hole. all ya need is that a pen, paper and ya normal tools to get ya spark plugs out.

If ya want to check if ya piston rings are worn is to put a drop of oil down the spark plug hole, thats called a wet compression test it helps seal in the combustion pressure. good luck man hope its just ya catch can

thanks LTHLRB, what do you use to lube the belts up with? im going to do it this weekend, its too dark when i get home during the week

madevo3: how much is the compresion tester to buy? i think it would be a good investment

ill be checking my rocker cover breathers aswell, i hope thats all it is

thanks again for your help

hi, well i tightened up the belts, that seemed to stop the squeeling, also i found out i have an exhaust leak, im not sure if is from the exhaust manifold or the dump pipe, is there an easy way to tell?

also where would i get the gaskets from? i think i might just change them all

cheers

  • 3 weeks later...
sweet thanx, i thought you could get them there, just wanted to make sure,

when you say they're not cheap, how much do you think they will be?

Don't worry about the gaskets until you find out if you need a new engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
    • I was surprised to see all the quick Jack models at the same prices on there. But yeah, grabbing one at 20% off would be great.
×
×
  • Create New...