Jump to content
SAU Community

Recommended Posts

Very keen to sell my truck again. It's been for sale now on and off for 2 years! lol. To be fair I never did really take out any ads or anything other than SAU.

This truck has done under 1,000kms in the 2 years I've owned it. I've used it purely to move house a couple times and move some big parts around etc. I'm about to use it to move house again and now really want it sold.

It has FULL service history from brand new. Is in outstanding condition, runs like clockwork every time I need it. The only thing I've had to do to is is recharge and replace the batteries I keep letting go flat from lack of use. It also has great aircon which is lacking from a lot of commercial vehicles. Don't know what else I can say about it. It's very easy to drive, just regular 5 speed box, nice power steering, has switchable exhaust assisted brakes too for when you've got a load on or turn it off when you want to keep the noise down. I really can't fault it in anyway, but I just don't have space or money to keep it any more. I now have 6 cars and 2 motorbikes and need to sell something off badly.

Rego is due for renewal this month so it'll have 6 or 12 months rego on it and be ready to rock.

ASKING PRICE NOW DOWN TO $15,500. You would be lucky to buy the pantec for that much, let alone the truck under it...

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...

Hey Charlie, the pantec is about 4 meters long and 1.85m wide, ceiling heigt inside is 1.75m. Length overall is 5.4m and height overall is 2.4m.

  • 8 months later...
  • 2 weeks later...
  • 2 months later...

Hey Richard

What's the engine code on it?? I know Nissan put td42's in some of there trucks but as you said if it was built by Isuzu then it's prob got there engine in it

Hey Richard

What's the engine code on it?? I know Nissan put td42's in some of there trucks but as you said if it was built by Isuzu then it's prob got there engine in it

this pic shows a nissan td42 http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=173716

  • 1 month later...

yeah it's a TD42. just fired it up again the other day and put 12mth more rego on it. truck is running nicely. I hadn't driven it for more than 6th months but it started instantly and runs just as sweetly as always. with a full 12mths rego on it now would be a good time for someone to buy it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
    • If you do make them, im sure you would have a number of buyers.. Every GTR I've been in have rattly door windows 
×
×
  • Create New...