Jump to content
SAU Community

Best Tune In Sydney


DECIM8
 Share

Recommended Posts

Hitman, gods gift to tuning - so he thinks.

Each to their own opinion.... But for someone that gets flown to the USA to tune ... he has to be pretty decent... :down:

I personally use Hitman..... no dramas, won't go anywhere else - but then I run a Haltech... But he is also pretty handy with a PFC judging by the dyno sheets and other members cars I have seen there.

But for other options I would use SAS, CRD or Unigroup... :P

Link to comment
Share on other sites

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

Firstly I'm insulted having my car called the Hot4s car as its clearly the Ignition DVD car

let me clear something up. my original workshop built that engine and it had ots of problems and drove like crap. when i took it to Croydon is was laggy, crap to drive, revved to 7700 and made less than 290rwkW

when it left Croydon it made 340rwkW on pump fuel ( won dyno comp at Final Battle last year to prove it) and it revved to 8800 rpm without breaking rocker arms. It also drove to Newcastle, did 10 dyno runs and drove back on half a tank so off boost driveability and fuel economy was awesome.

Basically it went form dog to best car Ive driven so dont use my car as a reason not to take it there when my car is a perfect example of why you should definitely take it there. I've been to a few workshops and seen a lot of other peoples work in my travels and Jim is the only person Ill take my 200SX to. Period.

Link to comment
Share on other sites

Firstly I'm insulted having my car called the Hot4s car as its clearly the Ignition DVD car

let me clear something up. my original workshop built that engine and it had ots of problems and drove like crap. when i took it to Croydon is was laggy, crap to drive, revved to 7700 and made less than 290rwkW

when it left Croydon it made 340rwkW on pump fuel ( won dyno comp at Final Battle last year to prove it) and it revved to 8800 rpm without breaking rocker arms. It also drove to Newcastle, did 10 dyno runs and drove back on half a tank so off boost driveability and fuel economy was awesome.

Basically it went form dog to best car Ive driven so dont use my car as a reason not to take it there when my car is a perfect example of why you should definitely take it there. I've been to a few workshops and seen a lot of other peoples work in my travels and Jim is the only person Ill take my 200SX to. Period.

Seen this improvement with my own eyes....Jim fron CRD is the best tuner in Sydney...period.

Only two people in this country i would trust to tune my car...and JIM is one of them.

Link to comment
Share on other sites

My bad I take it back, Yeah I know its Ignition but I had trouble remembering. I only bought hot4's for ignition anyway the mag sucks.

Disregard the hot4's car comment lol Ignition sorry. :P

Im sorry I want to clear up. I dont feel he isnt a GOOD tuner, however I feel its hard to own a reputable/busy business with alot of cars flowing in and be able to put the time into a car like unigroup seems to do (from what ive been told). I have little doubt he is an excellent tuner, its just the time he has and corners which can be cut (for a regular customer).

At the end of the day everyone has good and bad experences, Im encouraging people to post their good comments here.

Hitman I dont think I can say anything good.

Edited by DECIM8
Link to comment
Share on other sites

How bout this.. Unigroup will tune it now and ill piss away some more money in summer to get CRD to tune her.. Slight disadvantage to CRD in summer but they may be able to work something out.

I will store the unigroup tune for winter :P

I will post the dyno results for each tuner for everyone to decide. Mods prob wont change as ive spent enough money

Edited by DECIM8
Link to comment
Share on other sites

My bad I take it back, Yeah I know its Ignition but I had trouble remembering. I only bought hot4's for ignition anyway the mag sucks.

Disregard the hot4's car comment lol Ignition sorry. :P

Im sorry I want to clear up. I dont feel he isnt a GOOD tuner, however I feel its hard to own a reputable/busy business with alot of cars flowing in and be able to put the time into a car like unigroup seems to do (from what ive been told). I have little doubt he is an excellent tuner, its just the time he has and corners which can be cut (for a regular customer).

At the end of the day everyone has good and bad experences, Im encouraging people to post their good comments here.

Hitman I dont think I can say anything good.

I dont know what your trying to say??

Jim would not hand back a car that wasn't right...simple...ive seen it hundreds of times. If it wasn't right (i.e.running out of injector etc) he would hand it back with a safe level of tune and have a chat to the customer on pick-up. He can quickly tune cars because he's not guessing...he roughly knows where the numbers need to be before the car even goes on the rollers. I cannot stress to you enough and point out out to you guys he's the best this country has got.

Edited by DiRTgarage
Link to comment
Share on other sites

Its just what I feel my friend.. I just dont like the idea.

Suppose its not so much an issue now as must be lack of business as I have people ringing me..

Well see how it goes anyway.

Edited by DECIM8
Link to comment
Share on other sites

He can quickly tune cars because he's not guessing...he roughly knows where the numbers need to be before the car even goes on the rollers.

thats a good point

ppl assume that a quick tune is half assed, or incomplete

but its not always the case.

if the tuner knows what to expect, and already knows how he wants it to look when he's done, then he knows his shit and can be quick.

would you rather your tuner takes hours to tune your car, with a dumbfounded look on his face?

Link to comment
Share on other sites

^^ agreed with Tony 100%

If they know your car, they know the mods and previous tunes.. If they tune similar cars with similar mods then also expect it to be quicker as they are not starting from a base map....

Obviously a full tune from scratch including cold start takes longer than say adding a few mods and getting it touched up.

Link to comment
Share on other sites

I feel every car is different and should be tuned according, Im happy for them to load a map and retune it.

A particular tuner mentioned here took 20 mins and just uploaded a pre made map, this is why I am so picky.

However I understand what you mean, personal view once again. If a tuner had my car and had NFI it would be on a truck quick smart and off to the next.

Edited by DECIM8
Link to comment
Share on other sites

CRD tuned my car twice, i wouldn't take it anywhere else, when there was a problem they worked it out for me and jim explained everything he was doing to me.

jim was very fussy with my tunes and he started from scratch(both times), and it didn't take that long.

Edited by tbag
Link to comment
Share on other sites

The longer you guys avoid CRD the more time Jim will have to spend working on my car.

Good luck finding a better tunner, when it comes to Skylines, on this planet.

:banana:

Link to comment
Share on other sites

I have heard very good things about unigroup. Seen the tunes personally on friends car's, and A1 tuning :banana: Not a problem!!

very helpful person and knows his stuff..

Thats all i gotta say!!

Link to comment
Share on other sites

Im slightly concerned that you started a post with "please don't reccommend CRD, you must be kidding" but you obviously ahvnt been there and are responding to " my mate's mate's mate said this"

its alos pretty rude to slander online. dont see Croydon starting threads about how badly you do your job

and as you can see there is plenty of people here to defend Jim's tuning

Link to comment
Share on other sites

theres also plenty who have pm'd me.. negatively.

like I said each to their own.. I dont trust them full stop. I'm happy you've found a good tuner.

Its not a mates mate I saw the damage.

This thread has ended the way it was intended find a tuner, this will be unigroup. Not one single person has pm'd me or dropped the name badly. Obviously this means something.

FYI its not like it will hurt crd when it comes down to it how would I sway anyones thoughts? am I anyone particularly important? no.. Everyone makes there own choices in life. We'll have to agree to disagree.

Seems ive made quite a stir.

Edited by DECIM8
Link to comment
Share on other sites

Pm me your concerns about Hitman - I recently used him and all was sweet.

I would have gone CRD (used them before) and they are top notch but for this particular tune (SAFC NEO) they were more than double the price of hitman (try over $500) which I found wierd as they are normally quite good on price...

Edited by colossus
Link to comment
Share on other sites

Seems ive made quite a stir.

Its because your thread was stupid from the opening line...."Who is the best"? but please dont mention the shop that clearly "Is the best" Go figure.

Its like saying who is the best footballer in the A League but please don't say Joel Griffiths!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
    • NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
    • If it has had a code in the recent past, the code should still be there waiting to be read.
×
×
  • Create New...