Jump to content
SAU Community

Recommended Posts

Item: Z32 AFM's with plug's

Age: un-known

Condition: good (shown in pics)

Price: $530 or trade for RB26 dumps

Location: Sydney

Contact: Thomas on 0431520274

Comments:

22680 30P00 A36-000 N62 printed part number

ffg018bf9.jpg

fgfgfg72008019uy7.jpg

Slight chip on advance ring (no problem)

gjhfgth008021zu5.jpg

Plugs made up to suit loom

Item's in Sydney atm, prefer pick up but will still ship

Edited by Tomek
Link to comment
https://www.sau.com.au/forums/topic/227204-2x-z32-afms-with-plugs/
Share on other sites

man you can get them new for around that price

not trying to ruin your sale just pointing out the obvious

There like $295 new and then an extra $30 for plugs..

But with that said.. every sale is negotiable... I doubt that il get what im asking for since everyone is so keen on negotiating.

hey, wanna trade?

i got 2 gtr dump pipes brand new i ordered them from japan but i dont need em anymore cos im rb25 now?

pm me?

Sorry mate, should of specified in my original post, im after A/M dumps.

cheers

Bump, $430

Im sure someone out there is in the process of a decent set-up and is missing these, you's all can't be running MAP's :blush:

Edited by Tomek
Is the mesh completely in tact in both of them?

Hey mate, the mesh is perfect on both...

Can get some more close up shots for you tomorrow, if your interested..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A little more work this week.  Fitted astra power steering pump in the boot with a lowe fabrication bracket. Gave the pump a good clean, fitted Anderson plug and high pressure fitting. With the intercooler being flipped under rad support factory headlights weren't going to work. Ordered a set of origin battle lights, they arrived so got them test fitted. Will require some fiddling to fit nice but was an easy quick option for now. And today we pulled out the manual Rb gearbox and test fitted a ZF 8HP50. It will fit with some casting tabs cut off and small tap of the tunnel with a hammer. Pick up the adapter plate Wednesday so hopefully all bolted in Friday and measure for tailshaft which will be a 2 piece. Been doing a lot of ecu, pdm and tcu loom design so when comes to wiring it in a few weeks will all go smoothly.
    • FYP. Sadly. Even bolt cutters wouldn't take 2 sec. But in the days of 18v angle grinders, nothing is safe.
    • One piece driveshaft I would recommend a dual CV setup otherwise stick to OEM. I have heard most one piece driveshafts cause excess vibration otherwise. The transmission grind I'm quite familiar with. You can try shockproof gear oil, otherwise you need a new transmission. The shifter is extremely simple on these cars. If you want pull apart the assembly and replace the plastic bushing but I doubt that fixes anything. The tail light issue is very common, unfortunately new tail lights are long discontinued. The trunk antenna going up always is because your radio doesn't have a true power antenna control, just remote amp power signal. There is a blank switch plate that you can pop out and install a switch for this or alternatively source a head unit that has proper antenna control. Throttle body sticking you have to disambiguate by disconnecting the cable and seeing if the linkages are the problem or something else. There is a procedure to adjust them, refreshing them is also somewhat involved if that's the issue. I have dealt with many of these issues. Old cars really are fractals of problems. The more you fix the more you discover there is to fix.
    • Welp, you've got a long list of experiences right there. I'd say you're on the right path.
    • That's correct, suits my requirements a bit better. Sure there are also numpties there, however it's generally a different vibe and more my kind of vibe.
×
×
  • Create New...