Jump to content
SAU Community

Recommended Posts

For all the resident gurus,

I have recently lost the keys to my Japanese import R34. I haven't had it that long and (foolishly) didn't have another key. I obviously realise that I can get a key cut that will open the doors and boot, but assume that I will need a remote key for the ignition. I would imagine that Nissan in Australia wouldn't be able to help me as it is not an Australian car and I would assume they wouldn't have a register of the computer codes necessary. I really don't know much about the ignition system (in case you couldn't already tell) and would love to hear what some experts think my first plan of attack should be towards getting another key made. My plan was to call my importer in the hope that he would have, or would be able to source from Japan, the details of the vehicle's ignition system. I've heard about a "Neo key" but am led to believe that they don't make them anymore. Any thoughts about what I should do?

I'm totally screwed, so any information or suggestions would be greatly appreciated.

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/227378-lost-keys-imported-r34/
Share on other sites

Does it have an aftermarket immobilser fitted? Or an aftermarket ECU?

Otherwise if its standard you either call up a really good Locksmith with the gear to program up new keys for you, or you ring up Nissan. Either way your gonna be selling a kidney to get it. Although dealerships do tend to rip you off a tad more more than businesses, depends on the business you call to I suppose.

Hi!

Sorry about your dilemma.

What city do you live in?

I'm a hypnotherapist (psychologist & pharmacist): and I've done some work like this before 'searching for lost objects' that is. You can see an experienced one in your city.

But if you live in Sydney, I'll happily help you out...

Recommended fee is $99/1Hr session BUT

i) if we find the keys you can pay $33

ii) if we don't find them, I'm happy to charge you a $2 coin that goes to charity.

Regards,

Terry

Edited by Terry_GT-R34

get a locksmith in on it. nothing special about the key. get one from a 99/2000 GQ patrol and make sure it fits your lock. from there get he locksmith to make a ki\ey for your barrel and then cut that key to it.

Hi!

Sorry about your dilemma.

What city do you live in?

I'm a hypnotherapist (psychologist & pharmacist): and I've done some work like this before 'searching for lost objects' that is. You can see an experienced one in your city.

But if you live in Sydney, I'll happily help you out...

Recommended fee is $99/1Hr session BUT

i) if we find the keys you can pay $33

ii) if we don't find them, I'm happy to charge you a $2 coin that goes to charity.

Regards,

Terry

hahahahaha that's the funniest shit ever!

...this is a joke, right?

hahahahaha that's the funniest shit ever!

...this is a joke, right?

I kid you not !!

One guy lost some cash (whilst stoned out of his brain). By the second hypnosis session, we'd gone from a pot plant (with a palm in it - not Pot) in the backyard > garage > laundry > ceiling cavity where his right shoulder was pinned down by a truss. After he came out of it, he couldn't pay me quickly enough to get home. Hypnosis also revealed that the $$$ was in two bags.

Another one was finding an engagement ring under a can of Brasso in a laundry cupboard.

Another one was a man recalling where he parked his car. It was at Caltex Field (as it was known then). He came back and saw me 'cause he found it with a hose coming into the back window with the other end jammed in the exhaust pipe with a rag.

Another one is finding yes- car keys; when in anger he threw them across the room during a domestic, and they'd landed in a kitchen tidy that had gone out to the bin

A failed one was trying to help 2 RAAF guys to try and remember a combination to a locked safe where the combination is altered every 2 weeks. They told me the following week that they got into trouble and had to get the Oxy

Another failed one was helping a guy search for money under one of 3 houses but I think he only wanted a receipt to show his mates what trouble he went to...

(when in fact he'd already spent the moolah).

Edited by Terry_GT-R34
actually that'd be handy for me as I just lost/misplaced a pair of gloves my wife gave me as a present.. :D

That's not so baaad!

At least you didn't record a football match over your wedding !! OR DID YOU ?

  • 3 weeks later...
For all the resident gurus,

I have recently lost the keys to my Japanese import R34. I haven't had it that long and (foolishly) didn't have another key. I obviously realise that I can get a key cut that will open the doors and boot, but assume that I will need a remote key for the ignition. I would imagine that Nissan in Australia wouldn't be able to help me as it is not an Australian car and I would assume they wouldn't have a register of the computer codes necessary. I really don't know much about the ignition system (in case you couldn't already tell) and would love to hear what some experts think my first plan of attack should be towards getting another key made. My plan was to call my importer in the hope that he would have, or would be able to source from Japan, the details of the vehicle's ignition system. I've heard about a "Neo key" but am led to believe that they don't make them anymore. Any thoughts about what I should do?

I'm totally screwed, so any information or suggestions would be greatly appreciated.

Any ideas?

your local nissan dealer should be able to use consult ii. i work at nissan and a customer had the same problem with a v35 and i programed it for him.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A little follow up here on the ceramic coating.  We've had storms galore here and I've done a few ks, enough to gross them up  Consensus is that they didn't get as dirty as usual, the coating definitely repelled a little of the dirt and I think they kinda snowball. They get a little dirty and then they get dirty faster which makes sense. Cleaning them regularly would allow them to protect better.  Cleaning was a breeze. I tried first to just hose them off which, unsurprisingly, did nothing. But, making the wheels wet and then just wiping them over with a used but clean microfibre cloth was all that was required. I didn't need any cleaner at all, just water and a cloth. The wheels look amazing again.
    • Gave her a nice wash today and took extra time to clean off the tree sap and tar and crap. We have a usable garage now so she'll stay cleaner longer. Took a few snaps in some nice light afterwards.   
    • OK, solid mount Z1 diff brace is in, pretty straightforward, it picks up 3 diff hat bolts and ties them to 2 support bolts on the subframe. Pretty sure someone else on here said they had reduced axle tramp with this but mine was already pretty good for smooth wheelspin, and still is....will see you this goes over time and whether I end up with a broken rear diff hat
    • Ah yes, but the part in my hand was actually painted and fitted by me! I knew any front lip was likely to be sacrificial but I've had to fix it twice already... by the time I buy a fibreglass fixing kit, sort out sandpaper blocks, buy some fibreglass filler, body bog, spend the time and effort for a 'Greg' result... a new one being $290 seems like it's the better way to go and spray that with bedliner/raptor coat and we're all pretty again.. Would have preferred it last more than a month though. Them's the breaks I suppose.
    • I find it funny that the USA is finding out all this really really weird stuff, and people from the USA are coming here treating it like gospel, yet, all the info on solving those issues is here on these forums for the last 15 odd years... Also, I know how much heat it takes to ignite the hood lining of an R33 skyline. I worked it out myself... It also took a LOT of time, and heat for it to do it... Big single, and I needed to drive the car, so retarded the timing off to "protect it". Yeah, that was a bad move for cruising on a freeway with only 15 degrees of timing on it. That was a lesson I learned around 2009. So that's over 15 odd years ago. Aligning water and oil, that's identical for any turbo engine, it's not Japanese specific. If a shop doesn't know how to make sure the core is rotated the right way, then they shouldn't be touching any turbo engine. That's not a matter of "We haven't had Skylines for that long here"...
×
×
  • Create New...