Jump to content
SAU Community

Lost Keys (imported R34)

brodiejayR34
 Share

Recommended Posts

brodiejayR34 Apprentice

brodiejayR34

Posted
Posted

For all the resident gurus,

I have recently lost the keys to my Japanese import R34. I haven't had it that long and (foolishly) didn't have another key. I obviously realise that I can get a key cut that will open the doors and boot, but assume that I will need a remote key for the ignition. I would imagine that Nissan in Australia wouldn't be able to help me as it is not an Australian car and I would assume they wouldn't have a register of the computer codes necessary. I really don't know much about the ignition system (in case you couldn't already tell) and would love to hear what some experts think my first plan of attack should be towards getting another key made. My plan was to call my importer in the hope that he would have, or would be able to source from Japan, the details of the vehicle's ignition system. I've heard about a "Neo key" but am led to believe that they don't make them anymore. Any thoughts about what I should do?

I'm totally screwed, so any information or suggestions would be greatly appreciated.

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/227378-lost-keys-imported-r34/
Share on other sites
RBwhatever Veteran

RBwhatever

Posted
Posted

Does it have an aftermarket immobilser fitted? Or an aftermarket ECU?

Otherwise if its standard you either call up a really good Locksmith with the gear to program up new keys for you, or you ring up Nissan. Either way your gonna be selling a kidney to get it. Although dealerships do tend to rip you off a tad more more than businesses, depends on the business you call to I suppose.

GTR-N1 Grand Master

GTR-N1

Posted
Posted (edited)

Hi!

Sorry about your dilemma.

What city do you live in?

I'm a hypnotherapist (psychologist & pharmacist): and I've done some work like this before 'searching for lost objects' that is. You can see an experienced one in your city.

But if you live in Sydney, I'll happily help you out...

Recommended fee is $99/1Hr session BUT

i) if we find the keys you can pay $33

ii) if we don't find them, I'm happy to charge you a $2 coin that goes to charity.

Regards,

Terry

Edited by Terry_GT-R34
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

get a locksmith in on it. nothing special about the key. get one from a 99/2000 GQ patrol and make sure it fits your lock. from there get he locksmith to make a ki\ey for your barrel and then cut that key to it.

WazR32GTSt Grand Master

WazR32GTSt

Posted
Posted
Hi!

Sorry about your dilemma.

What city do you live in?

I'm a hypnotherapist (psychologist & pharmacist): and I've done some work like this before 'searching for lost objects' that is. You can see an experienced one in your city.

But if you live in Sydney, I'll happily help you out...

Recommended fee is $99/1Hr session BUT

i) if we find the keys you can pay $33

ii) if we don't find them, I'm happy to charge you a $2 coin that goes to charity.

Regards,

Terry

hahahahaha that's the funniest shit ever!

...this is a joke, right?

GTR-N1 Grand Master

GTR-N1

Posted
Posted (edited)
hahahahaha that's the funniest shit ever!

...this is a joke, right?

I kid you not !!

One guy lost some cash (whilst stoned out of his brain). By the second hypnosis session, we'd gone from a pot plant (with a palm in it - not Pot) in the backyard > garage > laundry > ceiling cavity where his right shoulder was pinned down by a truss. After he came out of it, he couldn't pay me quickly enough to get home. Hypnosis also revealed that the $$$ was in two bags.

Another one was finding an engagement ring under a can of Brasso in a laundry cupboard.

Another one was a man recalling where he parked his car. It was at Caltex Field (as it was known then). He came back and saw me 'cause he found it with a hose coming into the back window with the other end jammed in the exhaust pipe with a rag.

Another one is finding yes- car keys; when in anger he threw them across the room during a domestic, and they'd landed in a kitchen tidy that had gone out to the bin

A failed one was trying to help 2 RAAF guys to try and remember a combination to a locked safe where the combination is altered every 2 weeks. They told me the following week that they got into trouble and had to get the Oxy

Another failed one was helping a guy search for money under one of 3 houses but I think he only wanted a receipt to show his mates what trouble he went to...

(when in fact he'd already spent the moolah).

Edited by Terry_GT-R34
GTR-N1 Grand Master

GTR-N1

Posted
Posted
actually that'd be handy for me as I just lost/misplaced a pair of gloves my wife gave me as a present.. :D

That's not so baaad!

At least you didn't record a football match over your wedding !! OR DID YOU ?

  • 3 weeks later...
roadworia Collaborator

roadworia

Posted
Posted
For all the resident gurus,

I have recently lost the keys to my Japanese import R34. I haven't had it that long and (foolishly) didn't have another key. I obviously realise that I can get a key cut that will open the doors and boot, but assume that I will need a remote key for the ignition. I would imagine that Nissan in Australia wouldn't be able to help me as it is not an Australian car and I would assume they wouldn't have a register of the computer codes necessary. I really don't know much about the ignition system (in case you couldn't already tell) and would love to hear what some experts think my first plan of attack should be towards getting another key made. My plan was to call my importer in the hope that he would have, or would be able to source from Japan, the details of the vehicle's ignition system. I've heard about a "Neo key" but am led to believe that they don't make them anymore. Any thoughts about what I should do?

I'm totally screwed, so any information or suggestions would be greatly appreciated.

Any ideas?

your local nissan dealer should be able to use consult ii. i work at nissan and a customer had the same problem with a v35 and i programed it for him.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Potential MAP Reference Point

      By joshuaho96 · Posted

      Isn't there a fitting on the back of the balance tube? That's what the OEM boost gauge uses.
    • GTSBoy
      Potential MAP Reference Point

      By GTSBoy · Posted

      Getting a decent signal from all 6 throats is a challenge. I don't know for sure, but I suspect that the stock balance tube is not ideal for it. I have done it on an ALFA 4 cylinder (about 35 years ago, so don't ask for too many details). We drilled 4x holes in the manifold runners, put in some fittings and ran hoses to a decent sized (I think it was about 20mm diameter) pipe that ran the length of the inlet manifold. So, it was quite a decent volume. There is a "tuning" balance to be found between the volume of the common plenum on such a thing and the diameter of the pipes running from it to the runners. You need the volume to be large enough to damp out the sharp spikes in pressure signal you get as each runner gets sucked on by its cylinder, but not so large that it becomes too slow to respond to actual changes in MAP. And you need the hoses to be small enough to transmit the signal quickly, but not so small that they delay the signal. You might have to have more than one go at it, if there isn't any actual success based wisdom to be had here. Hopefully there is. Anyway, I would not do it on only a couple of cylinders. I would also not care about "permanently modifying a part". Just bloody drill holes and make stuff better. There is nothing sacred about any GTR unless it is a genuine museum piece that you shouldn't be modifying at all anyway.
    • MBS206
      NC MX5

      By MBS206 · Posted

      He's still joining you, he's just delayed it and won't have the fulleh sick ITBs...
    • Kinkstaah
      R34 GTT front hood lip

      By Kinkstaah · Posted

      The strange thing is this is a URAS front bumper (or clone of it). The bumper actually does not sit flush with the GTT hood - You need the addon to make the hood 'long' enough to reach the bumper. I have no idea why they didn't incorporate this piece into the bumper itself.. instead of sticking it to the hood instead.
    • AdiR34
      R34 GTT front hood lip

      By AdiR34 · Posted

      Another thought on this OLD topic: When you paint your bonnet lip, leave a small unpainted back lip/line along the back of the lip, where it rests on the bumper. That way, the line in the back is much more prominent than the gaps in the front/under the lip - and it breaks the hood-to-bumper connection at the "correct" place, when comparing to a GTR. I'm gonna do this with mine this week, so stay tuned for pics!
×
×
  • Create New...