Jump to content
SAU Community

in need of help PLEASE

chris

By chris,
in Engines & Forced Induction

 Share

Recommended Posts

chris Apprentice

chris

Posted
Posted

Hello all, I am new to this as I have not long owned the car and appologise to those who have heard it all B4.......I own an R33 GTST, which is all but stock other than a cat back, air pod and very basic screw type boost controller (Turbosmart). I have been experiencing problems with the car sort of "surging" and "hesitating" under acceleration (running 12psi boost). With alot of trips back and forth to the workshop the problem has been narrowed down to the mechanical boost controller, which has now been removed. Apparently when running high boost these types of controllers are simply not reliable. At the moment I am running a simple restrictor giving a max of 10.5 psi boost. The car now drives nicely with smooth power delivery except for the fact that it will only boost to around 5 psi until the revs are up over 4-5000. This gives it a two-stage feel rather than an immediate burst and a flat 12psi. I don't like that kind of "step" in the boost and now find myself changing alot more gears and revving the car more, origionally you could drive the car quickly and realy not need any more than 5000 rpm. My question is.......will an electronic boost controller solve my problems (possibly with a little less boost)????? If so which one????

Any advise would be greatly appreciated B4 I go and waste $1000

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/22749-in-need-of-help-please/
Share on other sites
Steve Grand Master

Steve

Posted
Posted

Stock boost control is 2 stage, second stage coming on about 5000-5500 rpm, so that is what you are experiencing.

The turbosmart bleeders are pretty popular, it is possible though at 12 psi you were spiking into boost cut which is why the surging/hesistating happened, but I am just guessing:)

EBC will give you full boost straight up. You can get a decent one second hand for about $400-$450 (something like a HKS EVC II). New are a bit more pricey. The latest Trust Profec B II is about $725 retail at the moment.

I bought my boost controller second hand, and I havent had any probs. You will also need a boost cut defender if you want much more than 12psi, but I highly recommend you dont do that with the stock cooler. Even 12 psi is a bit risky.

AeroGrace Rising Star

AeroGrace

Posted
Posted
Originally posted by Steve

Stock boost control is 2 stage, second stage coming on about 5000-5500 rpm, so that is what you are experiencing.

isn't that a 'Series-2 only' feature? I remember reading about that somewhere awhile back.....oh well...

having an EBC sure beats having to get out to adjust the bleeder everytime...:uh-huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • sonicii
      Mechanic in Victoria

      By sonicii · Posted

      I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...