Jump to content
SAU Community

Recommended Posts

  • Replies 244
  • Created
  • Last Reply

Top Posters In This Topic

ill give him full credit once its tuned and running properly... its only idling and light revs atm lol

dont let it idle for too long...id keep it shut down now until you can give it some decent revs with the engine loaded up as this will help the rings to bed properly. Then feed it some boost!!

http://www.mototuneusa.com/break_in_secrets.htm

I know its hard to have it sit there and not drive it, but you should only turn key when you are ready to drive/tune it. It will give the engine the best possible chance to bed everything in.

http://www.mototuneusa.com/break_in_secrets.htm

I know its hard to have it sit there and not drive it, but you should only turn key when you are ready to drive/tune it. It will give the engine the best possible chance to bed everything in.

that link is how i like to do things...don't baby them...run them hard to give them every possible chance.

  • 2 months later...
hows the update going with this?

any final power figures?

don't quote me but i think it was making boost at 3000rpm and full boost at 4100rpm...they got to 530hp before the dyno shat itself. Ill get Simon to post when proper info comes to hand.

  • 4 weeks later...

first proper dyno sheet 22p 536.3hp at only 7500 start to die off im gonna put it down to the size of the ex housing .81 single entry

he still hasnt touched the cam gear still set at 0 both sides and he said he still hasnt started looking for power. still conservative nearly 550ks to a tank so im pretty happy with it....

response for the size turbo it is is quite insane aswell neways have a gander

post-7443-1253941219_thumb.jpg

yeh ur rite file size is huge lol.... and no its not a run in tune.... thats basically a half done proper tune i had sum minor boost leaks to fix b4 he would push it ne further...... and wen i got back afta tightening a few t bolt clamps etc the dyno had magically arsed itself.... i waited 4 days in total to get the car redone only to try a sidestep of the clutch in 3rd and lets just say we found the weak point.... believe this or not but a hks gd max twin plate slipped b4 the gbox let go..... so yeh i wasted those four days down in brisbane for nuthin. im abit down for cash atm so thats the tune its gettin for the moment until the clutch is done. still tho 402rwkw is still nuthin to snuff ya nose at....

400rwkw is a good number dont get me wrong, but its only 46hp more than my 25 at basically the same boost level with a GT30. Granted im running E85.

I would have though an RB28 with big cams and a T04Z would be making a little more than that, maybe im wrong.

like i said theres still not finished.... havent touched cam gears at all 20p still 5 pound to go and also havent started pushing the timing at all yet its still very conservative. and yes e85 is good shit so ive heard im only on bp ultimate because thats all i can get..... and yeh i wasnt exactly happy with the first figure either but hey its a start and im going from there

Edited by skylinekid

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would again like too thank Matt for his help in me sourcing the detachable hard top for the little red car, without Matt's assistance in inspecting it and locking it down, I can guarantee it would have sold before I could get up to see it,  and as that was the only available NC hardtop in Australia, I consider myself extremely lucky on multiple levels To say I'm more that happy would be an understatement And, it is 100% water tight, I drove through torrential rain coming back south, and by torrential, they type of rain that doing 40kph in a 110kph zone was a real thing, and even then, the standing water on the Hwy was deep enough to throw waves I'm also more than happy that the huge "BEASTS" that Matt calls dogs didn't eat me for lunch, I'm sure the sniffs and licks were more to "taste test" me, over being to friendly Now to work out what colour to get it painted, panel match, or gloss black........first world problems are real
    • Actually I might have figured out. Looks like there is a tab according to google images but it's hidden. Silly me.
    • No clips on this one like the other connector. Only that red tab that I can push slightly up.
    • For any loom connector that has an obvious release that resists pushing far enough to unclip, just spray some silicone lube into it. You might also benefit from using a bent screwdriver or small pick to push in the right place at the right angle.
    • Hey all, I went to try and fix my indicator not canceling, but I couldn't remove the clockspring cable under the column so I could twist that green thin. Anyone know how to remove this cable? I see this red tab but didn't have any luck. I was thinking of unscrewing it but wasn't sure if it would cause issues. I did notice for my indicator stalk, 2 out of 3 cables were plugged in but the last cable wouldn't fit in the stalk. I'm getting it's for fog lights. It was like this when I originally pulled it off.  
×
×
  • Create New...