Jump to content
SAU Community

Weird Instrumentation Problems

Alecci

By Alecci,
in General Maintenance

 Share

Recommended Posts

Alecci Apprentice

Alecci

Posted
Posted

Water Temp, Revolution Meter, Oil Pressure, Speedometer and Fuel Guage suddenly stopped working during a mapping pull. Instrumentation lighting is working fine, but the gauges show nothing at all, all the needles staying at bottom like dead.

Boost and Water Temp on the MFD isn't working ether, apart from the Water Temp flashing red and showing 130° C. Oil Temp, Throttle and Injector Duty still works like normal, and the unit is lit up like normal.

We've checked all fuses (fuse box in the engine bay, fuse box to the right beneath the steering wheel and fuse box in the trunk), and we've checked the water temp sensor. Nothing's wrong with any of it?

Any suggestions as to what might be causing these problems?

Like I mentioned we've checked all fuses we were able to find, but does anyone know if there are any additional locations where there are fuses in the R34 GTR?

Perhaps someone even knows exactly where we can find the fuses for the instrumentation?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Fake ARP bolts?

      By GTSBoy · Posted

      Well, maybe not. The main feature of Chinese manufacture seems to be incredibly variable quality, coupled with an apparent willingness to find a way to see even the stuff that fails QC. So the military could still take the cream of the production run and somehow sell the "sellable but not really useable" stuff to the stupid round eyes on the other side of the world.
    • Dose Pipe Sutututu
      Nismo copper mix twin “pull” pedal height engagement

      By Dose Pipe Sutututu · Posted

      Have you adjusted the clutch pedal rod? You can wind it in to shorten it. Just can be a cnut to get to.
    • TurboTapin
      Fake ARP bolts?

      By TurboTapin · Posted

      Yes sir, that was me. Fake ARP's are also a thing over here in Canada and we only order from reputable dealers. It's sad that even simple things like bolts and hoses are now also being copied... anything to make a dollar.  Story time. Like all cheap crap from China, it's even an issue with firearms. Roughly 15 years ago, I purchased a new cheap Norinco 12g shotgun. First time out in the bush with it, while firing, bolt assembly didn't lock and it fired out of battery. The receiver also being cheap steel, basically exploded in my face. I was lucky to be wearing eye protection. Long story short, don't buy Chinese junk. Also Norinco being state run and their only military arms producer, if ever they do try and take over a country, don't worry about it lol. 
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      Newcastle NSW
    • ck_chino
      Nismo copper mix twin “pull” pedal height engagement

      By ck_chino · Posted

      Installed  Nismo coppermix twin competition spec last year in my bnr32 with pull trans with Oem slave cylinder. The point at where the clutch disengages/enages is right at the top of the clutch pedal, meaning I barely have to push the pedal down for the clutch to be disengaged.  You guys that have the same combo are you experiencing this high pedal bite point??   Secondly I’d like to have the disengagement point lower meaning I have to push the pedal more(further not effort)for it to be disengaged.  I’m thinking to use a Nismo big operating cylinder(bigger bore at 13/16 vs Oem 3/4) which will require more pedal stroke to get the equivalent movement at the clutch fork. But I see Nismo web site says not to mix these 2 as the Nismo big operating cylinder doesn’t have enough stroke to disengage??? Any folks run both the coppermix twin pull with Nismo cylinder??    Thanks in advance for the replies but prefer only guys with pull clutches to respond. thanks     
×
×
  • Create New...