Jump to content
SAU Community

Recommended Posts

the whole idea of a high octane fuel is so the engine wont detonate on boost. Higher octane fuel burns cooler and faster? (from memory)

the tune is probably run for 95

it would be possible to run 91 i guess but i dont think ud ever be able to hit boost and it would be really unsafe anyway

Edited by Boostin96

r34 still uses an rb25det as does my R33 series 2, i put 91octane in once about 5 months ago when there was a shortage of premium fuel available in NSW, the car did run but not well..... had idle problems and had allot less power and the car never really ran the way it did untill yesturday when i flushed out the throttle body, changed the spark plugs and lifted the idle alittle...... the car can run on 91 but its not recommeded

You'll be able to run it on 91 octane fuel. With the car running good or efficiently is a different issue.

Just tell your dad that if he's gonna run it on 91 octane fuel, he risks blowing the motor and he'll get shittier Ks done compared running it on 95 or 98. It seems to work for my parents! :)

Edited by adam-__-

If he wants a skyline, he should be prepared to pay for it otherwise its going to cost a alot to fix when things go wrong. They arent cheap cars to run.

At the lowest oct 95. If not oct 98.

Im a uni student and even i pump my skyline with bp ultimate 98 without fail.

just my 2 cents =)

i'll slap anyone who uses shell aswell,,,,,, i find it not as good as bp and caltex 98, car runs alittle rougher..... except for shell v power racing but i cannot find it anymore

R34 GTT is much newer than R33 GT's and i WILL NEVER run anything that is lower than 97 on it. My B13 uses 92 so if you wanna pump something that uses 91 get a B13 or equivalent. No offense here, just that it's such a waste to ruin a nice RB25DET cause of cheap fuel :D

AND

On another note, No-one is gonna leave a GTT stock forever :)

Edited by teng

true teng,,,, also i only used normal fuel ONCE because there was nothing around and had no choice....lol im an idiot but not stupid..... also dont be a tight ass on fuel,,,, put good stuff 98 oct in it and its usually less than $5 difference per tank..... $5 X 52 weeks is $260 more to use 98 octane than the 91 octane..... compare this to the probs that can be caused by the cheaper fuel..... new engine.... we looking at in the $1000's......

on that note..... what about the 98octane with 10% ethanol blend???? there is romours about ethanol destroying engines but from my understanding there was no proof???? ethanol is a natural octane booster and burns more efficient than conventional petroleum and is about 4 cents per litre cheaper, would there be any probs with that alternative??? the petrol companies say there should be no probs with any jap made car that uses a non carburator engine.....

true teng,,,, also i only used normal fuel ONCE because there was nothing around and had no choice....lol im an idiot but not stupid..... also dont be a tight ass on fuel,,,, put good stuff 98 oct in it and its usually less than $5 difference per tank..... $5 X 52 weeks is $260 more to use 98 octane than the 91 octane..... compare this to the probs that can be caused by the cheaper fuel..... new engine.... we looking at in the $1000's......

on that note..... what about the 98octane with 10% ethanol blend???? there is romours about ethanol destroying engines but from my understanding there was no proof???? ethanol is a natural octane booster and burns more efficient than conventional petroleum and is about 4 cents per litre cheaper, would there be any probs with that alternative??? the petrol companies say there should be no probs with any jap made car that uses a non carburator engine.....

I used just the standard E10 91RON stuff once on a 98RON tune. It was crap, well it drove fine driving normally but once you put it under any kind of moderate load and boost......instant ping. But the cruising economy did well kms wise. I won't be using it anytime again though.

the whole idea of a high octane fuel is so the engine wont detonate on boost. Higher octane fuel burns cooler and faster? (from memory)

the tune is probably run for 95

it would be possible to run 91 i guess but i dont think ud ever be able to hit boost and it would be really unsafe anyway

Higher octane burns slower (i'm not sure if it burns hotter or colder). The reason for pinging is the fuel burns "too fast" - most of the energy in the fuel is depleted well before hitting top dead center - therefore not giving the maximum kick.

That is why the car will ping if the ignition is advanced (fired earlier).

my old man is possibily selling his commodore and he's thinking of buying a dead stock r34 gtt. now could he run 91 octane in it? because i doubt he will want to run it on 98 all the time.

cheers guys

Not a good idea, the R34 gtt requires 98 as a minimum (even though it says 95 - fuel is variable - always anticipate 2 octane points lower eg. your 95 fuel could go down to 93). 2 main reasons to go 98 - Firstly it is turbo and secondly the RB25DET NEO has higher compression than the previous GTTs.

I own an R34 RB25 non turbo and I found that if I use 95 there is slight pinging on hills and my consumption seems to rise by about 2 liters per 100. I also drive fairly lightly. So I use nothing lower than 98 (unfortunate because of the price of fuel - however it is good insurance against my engine going pop).

It will be worse on a GTT.

At the end of the day buying a GTT and running it on regular 91 is a waste of money, as you will always not want to have it on boost, effectivly having worse performance and economy than a non-turbo model.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...