Do 350z Brembo's Bolt Up To R32?

[sav man]

I've been looking round for some bigger rear brakes. Are the 350z Brembo's the same as the R34 N1 Brembo's (14mm hole, 322mm rotor)? I know the R32/R33 have 12mm holes, but i read you can get special bolts to fix it without drilling hubs out.

Thanks

[Ronin 09]

i originally got a set of 350z rotors and set about getting an adapter machined up to fit the brembo r33gtr rear caliper.

the offset of the rotor is right (or 0.5mm out or something) so that should work.

problem was doing a bracket that only extends out 11mm - i think the factory 33gtr rear is 300mm, and the 350z is 322mm

ended up getting a biot rear kit (two piece) that has the brackets for a 322 rotor...

i think i have pics in my gallery.

cheers

[sav man]

what about the calipers, do they fit straight up? I just looked at your pics, are you running 2 peice roters to suit a 350z, if so where did you get them from?

[Rthirty2GTR]

Iam confused you ased do 350z brembos fit r32 then talk about r33/44?

I to would like to know will 350z brembos bolt up to r32gtr with out any hassels??

Any one done it .

[sav man]

I was asking if the 350z was the same as the R34 N1. I know the R33 ones are a diect bolt up, and the R34 needs eather hubs drilling out/special bolts. So if the 350z is identical to the R34 ones, i know that the 350z ones will fit with the special bolts.

If that makes sence.

I'd rather the extra size of the 350z rotor. And 350z parts are probably going to be easier to find at a wrecker.

Edited July 14, 2008 by sav man