1 And 1/16th's Master Cylinder

[Risking]

Item: Protex 1 and 1/16th inch Brake master cylinder

Age: Fitted Brakes Bleed, driven onto Trailer and done 1 race meeting at wakefield (20 laps total)

Condition: Perfect condition, drained and back in the box

Price: $180

To Fit: Any nissan

Location: Sydney

Contact: Via PM

Comments: Good upgrade compared to the old original 15/16ths masters getting around. It does not have an internal proportioning valve but can point buyers in the right direction for a good quality item. I was using it with brembos and had a nice firm pedal with good stopping power. It has two outlet ports for use with ABS systems or can use without ABS and split the front line into two with a junction point (how I used it)

Only reason for sale is I have now upgraded to a boosterless pedal box and dual masters so its no use to me.

Due to the lack of proporting valve It needs to have an external valve fitted to work properly.

[BOZ22N]

how much for a valve? how big is a std R33 GTR master cyl in comparison?

[Risking]

Valves are roughly 80 bucks for one like this on Ebay Bias valve

Allow for cutting into the rear brake line and two fittings which are not expensive.

Alternativly I had my valve mounted inside the car with braided line runnin through to the rear. It cost me about 90bucks to set-up that way.

The original GTR masters are a 15/16ths item and the Z32 twin turbos have a 1 inch so im lead to beleive.