Jump to content
SAU Community

Recommended Posts

We will be running the day as an 'open pit lane' day, but we will also have 4 qualified (Certificate 3 and 4) instructors with lots of experience.

Our regular instructors include - Two times Konica V8supercar champ Dean Canto, 2004 Australian Sports Sedan Champion and outright Sandown lap record holder Darren Hossack, 2007 Porsche Carrera Cup Champion Dave Reynolds, 1998 Australian Formula Ford and 2005 Konica V8Supercar Champ Adam Macrow.

We also provide lunches, tea / coffee / soft drinks , flaggies and Racesafe medical / rescue crew.

Typically on one of our trackdays you'll get around 200+ kilometers of track driving for the day.

You do not need a CAMS or ASSA licence to participate in our High Performance Training and Track Driving Days.

You also dont require any special mods to your car for our days.

The format we run to is: 3 groups of fifteen drivers, twenty minutes of track time per hour.

Start time is 8.30 am for safety briefing, track is open from 9.00 am until 4.00pm.

Call Tessa during office hours to book your position 1300 652 693

Cost is ONLY $225.00 per driver.

No further discounts will apply for this course

post-3810-1215947276_thumb.jpg

It be good to see some face's from the forum there. Ill be in my 32GTR so come and say hi.

Do you rekkin people can come to watch, Because i wouldnt mind if i could get some pictures on the day.

I am very interested :D, I have never been to one so any info would be great ,do we need to bring helmet or is it supplied,

and do you need to a have a fire extinguiser fitted in the car.

And can you bring a friend lol

:D

They told me you can bring a helmet or they can supplie you one one the day, fire extinguiser they said you dont need one.

I know you cant have any one in the car with you, But to watch iam not sure.

Edited by Rav
They told me you can bring a helmet or they can supplie you one one the day, fire extinguiser they said you dont need one.

I know you cant have any one in the car with you, But to watch iam not sure.

I did the track day on the 12th of July and you can have as many spectators as you like. So take your camera crew with you. They allowed us to have a passenger hot lap on the day which was good too. I'm not sure if that's something that happens all the time or not. Anyway it was a good fun day and you get to drive your car as fast as you can

I know I did :)

Have fun guys

Hi....what is it that you get taught, as ive never done any track work and have no idea what to expect.....

Also what am i most likely going to need to replace after the day???

( tyres, brake pads? oil change??)

cheers

^^^none of the above pending the condition of each before you go there. Make sure you have plenty of tread on your tyres, plenty of meat on your pads and that you're up-to-date with a service. It never hurts to change oil before and after a track day though. Be very careful not to put your handbrake on in the pits or you'll be very likely warp your rear rotors :blink:

They teach you when to begin breaking, what lines to take through a corner, when to accelerate again and when to change gear. It's a very informative and enjoyable day, you'll want to go back.

(QUOTE) Be very careful not to put your handbrake on in the pits or you'll be very likely warp your rear rotors.

Thanks for the tip i didnt know that and i would of put my handbrake on 110%. :blink: .

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • All of your suspension bushes/bolts etc, should also only ever be tightened when the car is sitting with full weight too.   IE, jack it back up, shove a heap of stuff down so you can lower the wheels onto so the car is "on the ground" but you have room to get under it.   It's why when properly done, you should be able to remove the shock and spring, but the arms won't go to 100% droop. If you don't do the above, you'll destroy your bushes.
    • We have some more genuine Japanese legally decommissioned car number plates in stock 🙂, as well as the plain white 40mm hole cover: Tama 400 No 12-41: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-no-1241 Morioka 300 Te 43-58: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-number-plate-set-te-4358 Plain White 40mm Hole Cover: https://www.oemsoko.co.jp/products/genuine-japanese-vehicle-number-plate-40mm-hole-cover-white There's also a yellow plate for Kei cars with the corresponding yellow 40mm hole cover sold as a set: Tsukuba 581 Ii 64-66: https://www.oemsoko.co.jp/products/genuine-decommissioned-japanese-vehicle-single-number-plate-ii-6466 Also some Skyline 1/43 scale models: 1989 BNR32 Nissan Skyline GT-R (Silver): https://www.oemsoko.co.jp/products/rare-ebbro-oldies-2006-release-bnr32-nissan-skyline-gtr-silver 1989 HCR32 Nissan Skyline GTS-t Type M (Red): https://www.oemsoko.co.jp/products/kyosho-original-1-43-hcr32-nissan-skyline-gts-t-type-m-red
    • These arrived today! Sadly I'm going to probably be smart and enjoy the car as is over the summer/sunny period and save the ~2 weeks downtime it'd take to swap the heads over and tune later in the year. Maybe. It's going to be pretty damn tempting seeing these bolt on funs just sitting in storage when they're ready to go. There's a non-zero chance I end up @The Bogan'ing it.
    • MZ11 Toyota Soarer in Iwata, Higashi Osaka
×
×
  • Create New...