Jump to content
SAU Community

Recommended Posts

They are MCA's.

He's been quite tricky with the design of the rear shocks too since he was worried about space. I'm not sure if he is doing the same with the R32 GTST boys versions, but he's built the remote canister into the rear shock housing which is the same as he does apparently for the Showroom EMO's (even though I thought remotes were against the rules in Showroom!! LOL) But other than the weld you can't really tell it has one.

But it's impressive stuff to look at. Now I just have to get it in there and see if my spring settings etc are all going to work.

still waiting for an email from ben to see the mca options.

they arn't really remote are they, as the canister looks to be part of the shock body. Is there much loss of travel? Why didn't you want the canisters in the boot? i thought it would have been more accesable. Or is the R34 boot to small?

Yeah I'll put "Get a CAMS License" on the to-do list for next year. But it's just been pointless me having one until now. I don't need it for the car rego and I haven't had any events I could do until now with one so there's been no reason.

Although knowing my luck I'll go get the damn thing and then these "Targa Class" events won't be on anymore.

Entrants list for the targa race (24 cars):

Greg Garwood Porsche RS GT3

Les Walkden Subaru STI Spec "C"

Mark Seamons HSV GTO

Simon Gillett Subaru WRX STI

Kerry Luck Nissan Skyline R32 GTST

Andrew Lawson Nissan 200SXR

Ray Hislop Ford BF Falcon

David Gilliver Ferrari 308 GTB

Kelvin Maxfield Nissan HR31 Coupe

Duncan Handley Nissan Skyline R32 GTR N1 V Spec II

Jason Dann Mazda RX7 S6 SP

Jeffrey Keyte Mitsubishi Lancer EVO 9 RS

Leigh Finlayson Mitsubishi Makinen Evo 6.5

Shane Bond Datsun 240Z

James Atkinson/Dean Lillie Holden GTS

Mark Grima Mitsubishi Lancer Evo 7

Dane Smith Nissan Silvia S14

Layton Barker Holden SS Ute

Dean Coutts Volkswagen Golf GTI

Mark Connolly Mitsubishi Evo 9 RS

Mathew Burns Holden VY Club Sport

Robbie Maher Mazda RX7

Peter O'Keefe Torana SLR 5000

Craig Dean Ford Mustang Saleen

Ill be there supporting Kerry in the GTS-t. should be a good meet. ill make sure i come and see you duncan.

Oh and Ben M is just being a soft C*#k. he needs to borrow Snowmans Penis pump.

On the to-do list just before "Get a CAMS License" is "Work out which CAMS license I need to get"

:(

haha

what event are you doing that needs a CAMS licence? Are you looking at ever doing door to door racing?

What AASA licence do you currently hold?

Only reason why I am asking all these questions is...There is a way to get your CC, NR or NC licence without having to go on your P's if that's the way you are needing to go..

It's for the Targa Class racing, ie, Symmons Plains a couple of months ago and Upcoming event at P.I. for the V8 Supercar support race.

Oh awesome!

Probably need a National Circuit for the PI race..Not sure Clubman Circuit would be high enough...

What? You can do PI Invitationals with an L2S?? No fricken way surely!! I have one of those! LOL

I presumed you'd need a National Racing License minimum (which now seems to be much easier to get apparently than it once was).

Jess I have the AASA National Rally License - which comes free in every Kelloggs box @ Targa :( But no good for any of the CAMS tracks.

No Way Marlin...L2S :(

Link of entry form????

Snowy,Cause you have done so many events including targa you should be able to use that as recognisable experience to just apply for your Racing Circuit Licence..

Or you would have to go on your P's do so many events, be a good boy and get so many events signed off plus officialing at an event so you know your flags and stuff...

Should ring CAMS and see if you are eligable for Competitor Dispensation....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • 100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...