Jump to content
SAU Community

Recommended Posts

This might have cleared the path....

http://www.caradvice.com.au/137632/lamborghini-gallardo-super-trofeo-stradale-unveiled-at-frankfurt-motor-show/

Prior to that i think it was a track only car. Nice lookin bit of kit in red/carbon.

http://www.lamborghini.com/en/models/gallardo/lp-570-4-super-trofeo-stradale/overview/

Edited by Darkside

Serial, I reckon the 31 rear suspension setup is just too shit to be any good on a Tarmac rally. On circuits you can set them up stiff to alleviate the appalling camber changes, but a rally car, esp a two wheel drive one, really needs to be pretty supple.

but once it is a classic there are pretty much no rules so you can fix all that shit

would be a waste of time me entering my production r32 as the rules change so often that it would be a waste of time converting/uncovering it from "Beverly hills lotto number spec"

have a spare hr31 shell and spare rb2630 that i could use and shitload of carbon 31 stuff to make it light and "fast" using a cheater classic spec gts-r

13" wheels may be a problem as that is about the only rule in classic. (limited to 9" wide.) But all the rest of the stuff sounds ace!! Maybe some wheelie bars to help it on launch??? Some good time to be made in the first 400m. I like to think of it as classic time attack class. :)

Good news - the Register Admin accepted my answer to the Nissan question!

So, you clowns - I'm here to police some of this nissan rice-trash, so tighten up your blow off valves.

Let's get started:Understeer of Fail - Very bucking funny.

When I read this I had to hold on to my sides just to stop them splitting.It reminded me of when I nearly Understeered of Failed my way right up the back of certain pink GTR 35 on the Sideling in TT11.

If that's what happens when you get oversteer - I'm sticking with my snow plough rice boys!

Edited by Captain Fathom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
    • Hell, I know that much. So far I just put it off as "part of the deal".
×
×
  • Create New...