Jump to content
SAU Community

Recommended Posts

ok so it was noticable tonight to post up on here, at around 4000rpm its almost like the car takes the accelerator off, cause i get a drop in revs and a back fire noise. i originally thought it was the back wheels spinning cause it was a simmilar feeling but the revs where dropping, not picking up, almost as if it was traction control?

it only does it every now and then, but it shouldnt be doing it......

the car is stock, apart from 4inch hks dragger cat back exhaust, pod filter, super spark coil pack, nismo S-tune sparkplugs and supposedly a bigger fuel pump?

is it just a case of maybe running too rich? overflowing the car with fuel and choking it??? injectors? spark plugs? im new to the whole skyling thing so any advice much appreciated

if youy need any more info please let me know

cheers

rhys

Link to comment
https://www.sau.com.au/forums/topic/228264-problem-on-boost/
Share on other sites

Could it be a boost cut?

I am guessing you have a boost controler or bleed valve (but not listed in your mods). If you have increased the boost and havent got an aftermarket ECU or similar the could cause the problem. The cooler and more dence air in winter will make this more obvious than in summer.

the forced induction section answers alot of questions i have learnt!

maybe have a search?

ive got more replies and looks here than there, im not too sure on what to search tho???

Have you checked cooler pipes and vacum hoses?? Just make sure they are all connected to something and dont have holes or splits!!

i'll have a dig around and see if any are loose

Could it be a boost cut?

I am guessing you have a boost controler or bleed valve (but not listed in your mods). If you have increased the boost and havent got an aftermarket ECU or similar the could cause the problem. The cooler and more dence air in winter will make this more obvious than in summer.

no such mods have been done, everything else is factory, running factory boost. i think you may be onto sumthing with the colder air???? it has only done it at night, and this afternoon when it is freezing cold, whats the go with this?

my car did the same sort of thing, ended up being a bad fuel pump, then not long after that the motor died, so get it checked out before something bad happens.

ahh ok, in that case would you recomend getting it booked into a mechanic/dyno asap??

cheers for the help guys

ok will do, can you guys recomend anywhere other than boostworx? (long story, not going there)

i have a dent in the bottom of my intercooler, could this be effecting it at all?

if the dent has pierced the core of the intercooler, then most definately. and it'd be letting unfiltered air into your engine. not good. thats a worst case scenario but if i were you i wouldnt screw around, go to yr fave mechanic or mark at exhaust tech to check it out

-D

if the dent has pierced the core of the intercooler, then most definately. and it'd be letting unfiltered air into your engine. not good. thats a worst case scenario but if i were you i wouldnt screw around, go to yr fave mechanic or mark at exhaust tech to check it out

-D

exhaust tech it is, will call them first thing in the morning. so a dent in the front mount if it has pierced the core would explain my current problem?

exhaust tech it is, will call them first thing in the morning. so a dent in the front mount if it has pierced the core would explain my current problem?

its a >very< long shot that it is to do with your current proble (lack of boost at certain RPM). I would recommend it get checked for the simple fact that any sort of air intake, be it turbo or otherwise, needs a filter to stop particulate matter screwing up the internal mechanics of the engine. Imagine getting a single grain of sand underneath your eye for a day. I'm sure it'd cause some wear/irritation issues before too long. Same goes with engines.

Your current problem for lack of boose could be a number of things, but I'd be suspecing an individually anomalous map at that particular rev range. For some single problem at a specific rev range, there would have to be a particular corresponding map that calculates the mix.

Having said that, you say its around 4000rpm? This is just over the 3500rpm boost kick in of most std ecu maps....could perhaps be worth checking the vacuum/control pipes to EBC or ECU stock actuators.. the aftermarket coilpacks are a variable but if you're not having serious problems, they'd be the last thing i'd look at. ** bear in mind im not a mechanic **

I get a drop in power a couple of minute after driving, but thats normal...after the engine warms up it switches to the ecu's map instead of relying on some other sensor/valve (i cant remember what its called cause im tired as hell, can some smart bugger please tell me what its called...:banana: AAC valve perhaps? Dunno)

Anyhow, it sounds like a pain in the arse to diagnose for a layman. I'd gladly palm it off to an expert and pay them for it. Lifes to short to chase leaky hose.

-D

i wish it was more regular so i could get a grip of when and how it comes in, so i could better explain it....i just feel like an idiot walking into a workshop and trying to explain the problem..... cause there is such a vast aray of possible issues....

cause its not like i can take a mechanic for a test drive cause the problem only arises at night when its freezing cold :banana:

how would they correlate to a drop in temperature? im leaning on boost (piping) or fuel :s

well i had the same problem, loss of power with very loud bangs from exhaust, but it happen'd all the time, not just with cold air temps like yours, and it was diagnosed on a dyno by my mechanic with air/fuel ratio's.

just take it to a good mechanic with a dyno, its not worth risking.

that actually sounds like a bosst cut to me.....i had that similar problem a while back when my vaccum hose came off.....so checking all your vaccum lines could sort that out....

if not then also take your cooler core and get it pressure tested as a dent could have punched the core and now its either leaking air or leting in unfiltered air....

if you say you have a aftermarket fuel pump then fuel shouldnt be an issue but get that checked as well.....most of the time a good dyno tuner will be able to pin point where the problem is arising from and should be a easy fix at times....

good luck with it all mate and let us know how you go

thanks for the reply, im just hoping a dyno tuner will know whats wrong from my description cause to date its only done it at night and there not open then :laugh:

anyways thursday after work i'll putter around the corner to Mildren and see what they have to say

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...