Jump to content
SAU Community

Recommended Posts

Thanks for resistor, works fine.

Here's a simple Injector calibration calculator for the ECUTALK. Refer to here for correct procedure when calibrating.

Inj.zip

  • Replies 82
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

if you have microsd cards uve verified to work, if u could post the brand/capacity and speed. keeping a list in this thread on pga, just compiling a list of working cards (though id assume most cards work unless told otherwise)

btw, have decided not to do another batch of displays in the short term (probably not till next year if i do), need time to work on the firmware rather than making the displays, so if ive told anyone therell be another batch at end of year there wont be any more - ive still got around 15 of this batch left

will probably make a batch of usb consult interfaces as people still have to pay >$100 for one (or use usb/serial adaptor) which is a bit much for something everyone (who doesnt have a lcd display!) should have.

hey man. loving your work really!

Im in NZ, and was only after a consult cable and some sort of software to run it on my laptop as im trying to diagnose a few fault codes. Whats the best price ya can offer me??

it already is the best price, im not making these for profit. im designing some usb consult cables at the moment which might be available in a month, around $50

  • 2 weeks later...

and thats the last display of this batch sold, have donated $145 for the 29 purchases in this GB

hope to make another batch of displays at some point, but not before the issues with the enclosures are resolved. check the website every couple of months to see if there are firmware updates

anyone who wants to be put on the waiting list for a display for next batch, either pm me here or send email to peter @ ecutalk.com (with link to your forum profile) and ill add you to the list and notify you when next batch is done

in the meantime ive got a batch of USB consult cables on the way (and serial ones to follow in a few weeks), although the AUD drops made it hard to keep costs down, should have USB around $60 (usb memory stick 'with cord out the end' style) and serial $45 (circuit in connector style like last lot). will post another thread for them when available

  • 4 weeks later...
in the meantime ive got a batch of USB consult cables on the way (and serial ones to follow in a few weeks), although the AUD drops made it hard to keep costs down, should have USB around $60 (usb memory stick 'with cord out the end' style) and serial $45 (circuit in connector style like last lot). will post another thread for them when available

Any progress on these?

im getting the cable part (ie cable + consult connector) cut/assembled elsewhere and i should have them in the week starting 8 december - then just a matter for me to attach the PCB to the other end etc.

on the issue of some peoples enclosures deforming in heat (ive already emailed everyone about this):

we've only had a mild (25C) sunny day at best (today is 35 but mostly cloudy) since i received 30 enclosures of a few different materials to try out, so it has been a bit hard to test, but in direct sunlight on the 25C day, of the 3 different enclosures, 1 'opened' up about 6mm on one side, and the other 2 opened only a mm or two - assuming they werent already opened slightly to begin with - so then neither of the enclosures are significantly better than the current one probably (and next hot and sunny day ill test them all out together and compare to current one - im not sure yet if they are any better than it)

but whether theyre better or not, i can send them out as replacements for anyone who wants one, and hopefully if theyre kept out of direct sunlight and hopefully any other intense heat, theyll survive well enough until i get ones that are better suited. 10 are white, 20 are black, so those with blue lcd may want the white box (though i dont imagine ill get any other white ones)

still working on alternative ones though (and wont be making another batch of displays until i have a suitable enclosure)

on the issue of some peoples enclosures deforming in heat (ive already emailed everyone about this):

we've only had a mild (25C) sunny day at best (today is 35 but mostly cloudy) since i received 30 enclosures of a few different materials to try out, so it has been a bit hard to test, but in direct sunlight on the 25C day, of the 3 different enclosures, 1 'opened' up about 6mm on one side, and the other 2 opened only a mm or two - assuming they werent already opened slightly to begin with - so then neither of the enclosures are significantly better than the current one probably (and next hot and sunny day ill test them all out together and compare to current one - im not sure yet if they are any better than it)

but whether theyre better or not, i can send them out as replacements for anyone who wants one, and hopefully if theyre kept out of direct sunlight and hopefully any other intense heat, theyll survive well enough until i get ones that are better suited. 10 are white, 20 are black, so those with blue lcd may want the white box (though i dont imagine ill get any other white ones)

still working on alternative ones though (and wont be making another batch of displays until i have a suitable enclosure)

I dont know how big your enclosures are but i do remember seeing some alloy ones at jaycar (dont know if you have jaycar stores in nsw) maybe they will have to be your final option.

Hey, Dumb question, will this work in an HR31 with an RB25DET being run by an R32 ECM? I have the consult port and the consult software and this works O/K.

Thank Wogboy.

ok so i got a black polycarbonate enclosure to test out, its good for another 50C on top of the normal ones, and so i left it with the others in the sun in my car yesterday. internal air temp was ~55, and the enclosures themselves were 90C on the dash.

the 2 normal plastic ones fully opened up. one 'hi temp' ABS deformed one one side, but didnt fully unbend, and the good news, the polycarbonate one was absolutely fine.

the only downside of the polycarbonate one is that its a gloss finish (like phones etc that u get fingerprints on), and you notice scratches a bit more, but i dont think anyone would mind that.

ive got about 25 enclosures then i can send out to people to use in the meantime, but ill aim to get a batch of polycarbonate ones (unless i can get them done locally), hopefully within next couple months (not sure what the lead times are).

ill send email around to everyone today just asking anyone with a deformed enclosure to confirm their address and ill send another out (obviously keep it out of direct sunlight etc until the final enclosures arrive).

  • 1 month later...

ive put in an order for the black polycarbonate enclosures, which i should have around mid-end February, so i can send replacements for anyone having issues with heat/deforming, and also one step closer for making the next batch of displays.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
    • I get into huffs with people when I suggest the MX5 looks so much better as a coupe than it does as convertible. Pretty sure I don't prefer the convertible version of anything. Good job on the hardtop! The next buyer will appreciate.
    • IMO wrap does have its uses, but like you said, quality wrap, and professional installation, would probably cost want a quality paint job does, but, the paint, if maintained, is basically for life, and much easier to touch up if required  In other news: it's pissing down here, with thunder, lightning and only some small hail "at this stage", luckily all "my" cars are undercover  I've also been contacted by a guy in Newcastle about the SS, he said he will come down next weekend for a look, we'll see how that transpires I guess 🫰
×
×
  • Create New...