Jump to content
SAU Community

Ran An 11.60 Et With My New Setup(vids)

ReganGTS25T
 Share

Recommended Posts

ReganGTS25T Enthusiast

ReganGTS25T

Posted
Posted

yup 11.60 @20 psi with pump gas and a real conservative spark map, hoping for atleast 70hp more with meth inejction a more agresive timing map and 25 psi, out of the gt35r, and when thats all good the n2o will be goin on

here are some vids, they are all against gutted and fiberglassed big block v8's

this last 1 is against turbo impreza GT that was runing 25 psi 22 degrees of timing a 2.7 liter stroker 272 race cams meth injection and was runing a mix of street gas and 110ll octane fuel, thier seems to be a bump ont he runway which makes me loose control right when i was about to pass him but i had to let off you cant really tell that well in the video but look at the front wheels :(

fotos of the car

skylinepiques.jpg

02Jul_0003.jpg

ReganGTS25T Enthusiast

ReganGTS25T

Posted
  • Author
Posted
nice setup, there could be small gains to be had from changing your intake and hot side intercooler piping around with a cold air partition i'd imagine

yea i know i but eh i dont think it will be over 1 hp, my air intake temp is below 25 degrees and if you add the methanol injection it will proly go down another 5 degrees+

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RB335
      C-red tuning?

      By RB335 · Posted

      Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • Predator1
      Billet Merge Collector for manifold

      By Predator1 · Posted

      As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      Re read everything that has been written about this in this thread.. Let us know if you're still confused.
×
×
  • Create New...