Jump to content
SAU Community

Recommended Posts

OK I want the part, have the cash, but I'm not spending money on an item that won't fit correctly. I need confirmation that this will fit a GTR before I purchase.

Please PM johnbarry88 as he has the sample.

  • Replies 124
  • Created
  • Last Reply

Top Posters In This Topic

Please PM johnbarry88 as he has the sample.

Hi PSI,

John may be doing a great job designing the part, but I'm buying it from you and expect to be able to return it, if it doesn't fit. Not that I want to return it in the first place as it costs me time and money to do so.

John may be doing a great job designing the part, but I'm buying it from you and expect to be able to return it, if it doesn't fit. Not that I want to return it in the first place as it costs me time and money to do so.

I only asked you to PM him as he was going to conduct testing on different series and possibly even a GTR so he might already have the answer you are looking for. Without having the part myself (there is only one sample at this stage) I can't guarantee it will fit. If you want to order anyway you are welcome, and by all means return the part if it doesn't fit, as per our terms and conditions (PM me if you are unsure) and we will refund you.

  • 2 weeks later...
Hi mate i would like to order one for my R33 4-door...

If i can still order one then could you send me the details and i will order ASAP.

Cheers

Adam

Here is a link to the item:

http://www.psiparts.com.au/front.asp?pid=8...ID=R33S-EXHS-CF

Shane

Hi Guys,

The shrouds arrived and were all shipped today (Thursday) via Express Post so you should have them for the weekend!! :P

Cheers,

PSI Parts

i like the finish on mine however doesnt fit as well as i thought it might of the top of mine is warped for lack of a better discription. hopefully once riveted on it will fit nice and snug to the bumper.

Yeah ditto... Mine doesnt quite fit the curved contour of the bar properly. Havent fitted it, but I dont think it's going to make much difference as carbon isnt the easiest stuff to bend!

  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
×
×
  • Create New...