Jump to content
SAU Community

Recommended Posts

see if this thread kicks off??

were are there unmarked cops, marked cops, places yoiu see the cops always sitting waiting to get some1??

were do you see them cruze around all the time looking for p plates??

in my area, taylors lakes and shit, melton tmu patrol keilor mountain hwy.

sometimes speed cameras setup on taylors road just after st'albans gym

and another i can remember, radar gun on western ring road, just befor fitzgerald road exit,always sits in the middle of the freeway..

were are your local revenue raisers camping or patroling??

burke road, eastern freeway overpass.. they hide in a really tucked away driveway the cheeky buggers.. that's where i got done speeding :D

This doesn't actually mean on the freeway, they sit in the two driveways to the left as you get of the freeway and head north/just north of the overpass

Western Ring (Radar Guns):

Motorbikes sit under/just off the rd the two foot bridges between Pascoe Vale Rd tunnel and Sydney Rd generally Greensborough bound

Marked but also seen unmarked cars on the side of the road between Sydney Rd and Cragieburn bypass just infront of pipeworks

On the slopes behind the Edgars rd overpass both directions

Service lane at the end of the onramp from the Cragieburn bypass Airport bound (get you as u come down the hill)

The big island at the Greensborough end of the Ring where you get on, (generally facing towards Watsonia)

At the Greensborough end of the Ring were it becomes 90 and splits in 2 they sit up the dirt rd in the middle

yeah eastern freeway has cops, wouldn't go speeding there too often..

my gf just got flashed on elgar road in box hill the other day, just north of the whitehorse road intersection. hooning in her mazda 3 haha

yeah eastern freeway has cops, wouldn't go speeding there too often..

my gf just got flashed on elgar road in box hill the other day, just north of the whitehorse road intersection. hooning in her mazda 3 haha

There is a mounted speed camera there when youre coming from the freeway on elgar down towards burwood hwy, just before you cross over whitehorse rd. Gets a lot of people.

When I used to live in Rowville, the stretch of Wellington Rd between Stud Rd and Napoleon Rd always used to have a lot of cops. Especially the curves between stud rd and taylors lane. Common please for booze busses. And cops often hide in the bushes on the sides of the road.

burke road, eastern freeway overpass.. they hide in a really tucked away driveway the cheeky buggers.. that's where i got done speeding :D

i lost my licence in that very spot lol

f**ken flamin mongrels there always there

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...