Jump to content
SAU Community

Abs Unit I Rebuilt It !

Rthirty2GTR
 Share

Recommended Posts

Rthirty2GTR Contributor

Rthirty2GTR

Posted
Posted

Hi all,

Like many others I had an ABS unit that was leaking and did not want to put another 15+ year old unit on that wasn't leaking yet but was going to, probably 2 minuts after I had paid $400 for it.

Having looked around here on the forums it seemed no one had ever tried to repair one. Since I have a background in brake cylinder resleeving, I had been given many odd things to rebuild and repair because they were either too old or expensive to buy new.

I decided to try to repair mine. What was I going to lose? - I already needed a new one !!!

Anyway, I pulled the thing apart right down to nothing to find the internals all in good condition mainly because they are all made from aluminum and therefore doesn't rust or pit easily. Just the seals had gone hard.

So I tracked down a company that sells EPDM seals (the only material that holds up to brake fluid) and we went about matching them all up (about 36 of them). We found all except one and I started the reassembly.

All went well. Four hours went past and I was refitting the unit to my car, bled the system through and hey presto - Job's a goodin.

The unit has now been back on the car for a few days and all seems to good. Brakes work as new and abs funtion is perfect with no leaks .

Any-one that has some mechanical knowledge and the right tools should be able to do this without too much hassle.

I will keep this updated if any problems arise or if any one wants some help doing there own.

GIVE IT A GO! WHAT DO YOU HAVE TO LOSE? MY UNIT IS NOW AS NEW, NOT SECOND HAND.

Link to comment
https://www.sau.com.au/forums/topic/228596-abs-unit-i-rebuilt-it/
Share on other sites
Rthirty2GTR Contributor

Rthirty2GTR

Posted
  • Author
Posted

Basic tools ie spanners allen keys etc all the normal stuff if you play with cars , nothing exotic

Seals cost me about $75.00 plus some brake fliud got them from a company called Trans seals

If you pull one side of it apart at a time you will always have a referance to look at if you get confused, just take your time and keep things clean .

Rthirty2GTR Contributor

Rthirty2GTR

Posted
  • Author
Posted

Ok for those that want to give it ago the company i got the seals from

Trans seals Pty Ltd www.transeals.com.au

1 Atlas court Welshpool WA 6986

08 9458 5766

You will need

number required

2 O-Ring 1.864 x0.070" EPDM-70

2 O-Ring 0.364 x 0.070" EPDM-70

2 O-Ring 0.489 x 0.070" EPDM-70

2 O-Ring 0.612 x 0.103" EPDM-70

2 O-Ring 0.424 x 0.103" EPDM-70

2 O-Ring 0.426 x 0.070" EPDM-70

3 O-Ring 0.609 x 0.103" EPDM-70

3 O-Ring 0.864 x 0.070" EPDM-70

3 O-Ring 0.143 x 0.103" EPDM-70

15 O-Ring 0.176 x 0.070" EPDM-70

2 O-Ring 0.676 x 0.070" EPDM -70

2 O-Ring 0.987 x 0103" EPDM-70

Some PBR rubber grease Available from Repco or the like

Next time i do one i will take photos and do a how to page , until then I'am happy to answer questions .

  • 1 month later...
  • 5 months later...
Mike__ Enthusiast

Mike__

Posted
Posted

Nice work!!

Mines always had a very minor leak & didnt want the risk of a 2nd hand unit.

Did you bleed the entire system again once changed or just the nipples on hte ABS unit?

Glad the seals r in Perth, was expecting them to be over east :D have printed out your list. thanks

Mike

SteveL Mentor

SteveL

Posted
Posted
2 O-Ring 1.864 x0.070" EPDM-70

2 O-Ring 0.364 x 0.070" EPDM-70

2 O-Ring 0.489 x 0.070" EPDM-70

2 O-Ring 0.612 x 0.103" EPDM-70

2 O-Ring 0.424 x 0.103" EPDM-70

2 O-Ring 0.426 x 0.070" EPDM-70

3 O-Ring 0.609 x 0.103" EPDM-70

3 O-Ring 0.864 x 0.070" EPDM-70

3 O-Ring 0.143 x 0.103" EPDM-70

15 O-Ring 0.176 x 0.070" EPDM-70

2 O-Ring 0.676 x 0.070" EPDM -70

2 O-Ring 0.987 x 0103" EPDM-70

Good work. With one exception, I can give the direct reference number, which is much easier for suppliers to work with.

You mention in the first post that one o-ring could not be found. Do you have the dimensions as there might be something available that will be close enough to do the job ??.

  • 7 months later...
YLD-CHLD Collaborator

YLD-CHLD

Posted
Posted
Good work. With one exception, I can give the direct reference number, which is much easier for suppliers to work with.

You mention in the first post that one o-ring could not be found. Do you have the dimensions as there might be something available that will be close enough to do the job ??.

Will be doing this in the near future,just ordered the o-rings,will post pics when done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Red Sky II
      Looking for autoelectrician in Perth who can do the OEM to double din stereo upgrade.

      By Red Sky II · Posted

      Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...