Jump to content
SAU Community

Pre-purchase Inspection

stalemete
 Share

Recommended Posts

stalemete Apprentice

stalemete

Posted
Posted

Hey Guys,

As the thread title probably hints at I've finally found a v35 I'm happy with;

But before I spend this much money I'd obviously like a private inspection..

So this is a shout out for anyone who can do on site inspections or has a workshop near Newtown.

Feel free to call/pm/reply

Cheers

Adam

0403 350 534

Link to comment
https://www.sau.com.au/forums/topic/228852-pre-purchase-inspection/
Share on other sites
NISMO Grand Master

NISMO

Posted
Posted

Why don't you get one of those inspection companies to do it?

Can't remember the name at this time, but you get a 4 or so page report, with plenty of photo's. Everything from paint depth check to see if it's been hit, to compression test of the engine.

as always there not the be all, but most will also offer you a 3 month warranty or such that the car is as the report states.

stalemete Apprentice

stalemete

Posted
  • Author
Posted
  NISMO said:
Why don't you get one of those inspection companies to do it?

Can't remember the name at this time, but you get a 4 or so page report, with plenty of photo's. Everything from paint depth check to see if it's been hit, to compression test of the engine.

as always there not the be all, but most will also offer you a 3 month warranty or such that the car is as the report states.

That's what I'm looking for, the only issue is most places have never heard of a v35 skyline.

NISMO Grand Master

NISMO

Posted
Posted

That's them!

I used them in QLD as I am in NSW. Had them do the inspection first that way i wasn't wasting an airline ticket for nothing.

Once the inspection came through with flying colours, flew up, checked it out and drove it back to Sydney the same day.

I think you can get different levels of inspection as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...