Jump to content
SAU Community

Recommended Posts

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

am looking for the plastic thingy in the middle that goes around the deck/aircon control etc.

how much ? and where can i pick it up if not how much postage to syd 2165..

ohh and do you still have the intercooler ? :)

Omg! now a million dollar question which I forgot to ask.....is it the same asd the R32 GTR one..if it I will take it..

From all the pics i have seen it is. The reservoir is different but the lid looks to be common between the 2

am looking for the plastic thingy in the middle that goes around the deck/aircon control etc.

how much ? and where can i pick it up if not how much postage to syd 2165..

ohh and do you still have the intercooler ? :)

Hi mate,

I have a panel glued to the back of the surround with gauges mounted and will have to see if i can remove it without damage.

Oil cooler sold

GTSt indicators sold

I am removing the engine tomorrow, i started and videoed the engine today prior to removal so if anyone is interested in the engine i can get a copy of the vid over. The car ran for about a minute before being shut off and idled surprisingly well considering the hole in the intercooler end tank which we found later.

I also carried out a compression test about 5 minutes after taking the video

1) 150psi

2) 152psi

3) 151psi

4) 150psi

5) 150psi

6) 150psi

I was pretty surprised by the results as i have never tested an engine with such consistent compression.

So splitfires and injectors are now available

engine and box are now out of the car.

Passenger side caster rod was found to have a slight bend as seen in the attached photo so price is reduced to $75. It's probably still usable, the threads are fine, ball joints fine so if anyone wants to have a punt, $75 firm or i keep em for bits.

post-2863-1217150516_thumb.jpg

Also pics of some of the other bits i am getting questions about.

post-2863-1217150798_thumb.jpgpost-2863-1217150821_thumb.jpg

post-2863-1217150854_thumb.jpgpost-2863-1217150878_thumb.jpg

post-2863-1217150919_thumb.jpgpost-2863-1217151121_thumb.jpg

post-2863-1217151220_thumb.jpg

gear box cross member was found to be bent. Now separating the box, tailshaft and modded speedo drive

rb25det box $1350

1 piece custom Hardy Spicer tailshaft $350

gtr speedo drive with r33 gear $50

I also have a brand new navara speedo drive i think it still has the original gear on it $50 as well.

gear box cross member was found to be bent. Now separating the box, tailshaft and modded speedo drive

rb25det box $1350

1 piece custom Hardy Spicer tailshaft $350

gtr speedo drive with r33 gear $50

I also have a brand new navara speedo drive i think it still has the original gear on it $50 as well.

Hey mate,

Speedo drive SOLD

Check your PM

Cheers.

i have a stock one but it is far from good. I'm keeping my aftermarket one on the off chance i buy a new car that it suits.

If you need it anyway send me a pm and we can talk price.

now separating the cams, cam gear and engine. I'll remove them from the engine this weekend and reinstall stock cams and cam gear

so early hks rb25det cams 256 8.8/264 9.0 $650. If i find i have a spare stock exhaust wheel i'll chuck in the adjustable one at that price

s1 rb25, no coils, no turbo and a set of stock injectors and a rail. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

Edited by BHDave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
×
×
  • Create New...